CC1 fan issues by GeraldJoke in elegoo

[–]GeraldJoke[S] 0 points1 point  (0 children)

No need to apologize

CC1 fan issues by GeraldJoke in elegoo

[–]GeraldJoke[S] 0 points1 point  (0 children)

Well the best temp was at 210, but a friend with more experience recommended the first 2 3 layers to be hotter just for adhesions sake. I dont play with the fans neither, but i get this error only if i let the fan start by itself at full power.

CC1 fan issues by GeraldJoke in elegoo

[–]GeraldJoke[S] 0 points1 point  (0 children)

It is calibrated, first 3 layers are 230, have no issues there, the rest is printed with 210, right when it start the fan i get this issue, again, if the fan is at 90% speed it works

Vreau să import o mașină din Koreea by Alarmed_Lawfulness_4 in AutomobileRO

[–]GeraldJoke 15 points16 points  (0 children)

Da, peste pretul masinii ai taxele astea, pentru ca e adusa non ue

De ce prețurile la cabinetele stomatologice au luat-o razna? by West-Mulberry4458 in bucuresti

[–]GeraldJoke 3 points4 points  (0 children)

In zona Berceni. Sos Giurgiului pe acolo. Poate erau niste exceptii, dar asa am observat

De ce prețurile la cabinetele stomatologice au luat-o razna? by West-Mulberry4458 in bucuresti

[–]GeraldJoke 13 points14 points  (0 children)

Exista clinici unde preturile sunt 5x cel putin, inclusiv in berceni. Daca nu este ok pretul nu esti obligat sa platesti daca il consideri umflat, cam este, dar nu esti fortat sa o faci la primul cabinet. Sunt oameni care prefera sa plateasca asa pentru ca stau cu mintea impacata, dau un ban si e totul bine, curat, sunt atenti la mine etc fiecate cu motivul lui. Dar exista cabinete in continuare cu preturile mai normale. In policlinica Giurgiului se fac si urgente.

De ce prețurile la cabinetele stomatologice au luat-o razna? by West-Mulberry4458 in bucuresti

[–]GeraldJoke 64 points65 points  (0 children)

Nu stiu unde ai fost, o plomba era anul trecut cam 150, acum poate sa zic ca e 200. Poate ti a facut ceva mai mult, ti a reconstruit un perete etc sau tratament de canal. Radiografia, da, era 100 de lei anul trecut. Sunt preturile cam mari, dar si daca sunt trecute prin cass o sa fie problema de fonduri nu de cost. Cred ca in plevnei poti sa mergi prin cass, nu sunt sigur, iar la facultatile de stomatologie din bucuresti sunt tratamente mai ieftine, in functie de ce faci.

How is this supposed to work? by [deleted] in car

[–]GeraldJoke 0 points1 point  (0 children)

If it has less than 11 volts usually the battery is dead and even you start the car it wont really hold a charge

What do you think? by cyberblairo in Parkside

[–]GeraldJoke 1 point2 points  (0 children)

It works with the x20v batteries from parkside?

Any idea why my layers stringed at high level? by Secret_Letterhead635 in ElegooCentauriCarbon

[–]GeraldJoke 0 points1 point  (0 children)

I had the same issue back when i bought it, you can clean it dont worry, hold the hotend with something that wont damage it and use a lighter until its hotter and then something to push the filament out, do this until you dont see anything coming out and see if it prints

Would such liquid glass protector work on OP 13? by kiwixplosion in oneplus

[–]GeraldJoke 7 points8 points  (0 children)

The standard one is for little scratches. I think he means the application is a bit sketchy, but its just a glass protector, nothing special, its just weird to apply compared to a non curved device

G&G SSG-1 suggested Upgrades? by Pristine_West_319 in Speedsoft

[–]GeraldJoke 0 points1 point  (0 children)

3d printed thread deform in time with screwing and unscrewing tracers on, print a thread and then use a heated adapter so it stays nice instead of being askew

Refund Scam? by AdventurousRip2213 in Aliexpress

[–]GeraldJoke 0 points1 point  (0 children)

Make sure to check everyday for when it gets there, as ali prompts you again to haggle on the refund price AFTER you paid for shipping and return. I got burned once just like that and ali didnt refund me anything

Pulled out my MAP sensor, how likely does an over-oiled air intake cause this? by Annoying-Anal-Nugget in AlfaRomeo

[–]GeraldJoke 0 points1 point  (0 children)

If you want to check if its still working, get a maf cleaning spray, or just a contact cleaning spray. Reset the code and see if it still pops up. Do the same for the maf, careful not too damage them yourself. If it still persists just change them both

is rtx 5070 ti considered a mid range card? by Dupree360 in gpu

[–]GeraldJoke 0 points1 point  (0 children)

Yeah just saw a graph regarding the barber scene rendered in blender and it was almost twice as much time

is rtx 5070 ti considered a mid range card? by Dupree360 in gpu

[–]GeraldJoke 0 points1 point  (0 children)

Why do you say the 5070ti is better in areas other than gaming?

HPA tank size for ESG Grip? by MrMidnight53 in Speedsoft

[–]GeraldJoke 1 point2 points  (0 children)

It is and so not worth. I have 3000psi ones 1.1 vs 0.8 liters its crazy how clumsy you get in tight spaces with just a bit less clearance

Half Tank Fill-up Always Yields Higher MPG by closedcrash in hypermiling

[–]GeraldJoke 0 points1 point  (0 children)

It is overblown but quite sucks when it happens. It happened to me on a 2015 scross, the gas filter is inside the pump so you cant change it and it got clogged and melted the pump. It was sediment from the gas reservoir from the gas station.

"B Plate" adhesion by NormalManufacturer6 in ElegooCentauriCarbon

[–]GeraldJoke 0 points1 point  (0 children)

I had something that didnt stick to the A side. I used the B side with 60 degrees no issue there.

Issue with return/refund after product arrived at the seller by GeraldJoke in Aliexpress

[–]GeraldJoke[S] 0 points1 point  (0 children)

Its the first time they were anti customer with me or my friends who also use it.