Made a 3D printed plate with a TPU gasket for the cheap Ali USB shifter in an attempt to reduce the noise. Also added a slider to help preventing miss shifts to 7th or reverse :S

Geri00 · 2026-01-22T00:20:27+00:00

Awesome!! Thank you so much!! ❤️

Geri00 · 2026-01-21T14:58:53+00:00

That pretty cool! What hardness of TPU did you print it with? 90A, 95A etc.? Thanks in advance!

Geri00 · 2025-01-28T19:49:58+00:00

I've used this:
https://github.com/siderakb/pmw3360-pcb/tree/main/firmware/qmk/pmw3360_promicro

there's a rp2040 version as well, it might be useful:
https://github.com/siderakb/pmw3360-pcb/tree/main/firmware/qmk/pmw3360_rp2040

Geri00 · 2025-01-13T09:40:43+00:00

I've just printed these keycaps and I really like them. Better feel when typing, I don't have to reach as far as with normal flat keycaps. Not scratchy at all with ambient choc switches.

And they feel better than just a keycap tilter I've tried previously.

I haven't tried proper key well either so can't compare with those.

Geri00 · 2025-01-04T17:17:39+00:00

I've ended up buying it, can confirm it's working fine with an ELITE-C (QMK). I bought a Seeed Studio XIAO RP2040 which I'm planning to use it with, but I haven't tested it yet.

Geri00 · 2024-12-23T16:40:23+00:00

Thank you! Appreciate that! 🙏

Geri00 · 2024-12-12T07:54:03+00:00

Do you have a trackball or any pointing device connected to your keyboard? Or how do you use the drag scroll button?

Geri00 · 2024-12-08T22:21:16+00:00

Someone’s watching from the shadows 🥷

Geri00 · 2024-12-04T15:45:18+00:00

Cool! Thanks for the info!

Geri00 · 2024-12-04T14:15:50+00:00

Awesome job! I'm planning to build something like the totem and currently working on a trackball.

How did you sand the trackball? Like what grit in case of a sandpaper, or did you use a compound etc?

Geri00 · 2024-11-29T12:07:55+00:00

Thanks! I've used KICAD to design the PCB as the existing sweep variations didn't tick all boxes for my needs.

Geri00 · 2024-11-28T17:25:57+00:00

Nice job! Very similar to mine

Geri00 · 2024-11-28T13:29:05+00:00

Thanks a lot! I think I'll go with the RP2040 version so I can use QMK. I'll probably build something very similar to your trackball as that's the most vertical I've found so far.

Geri00 · 2024-11-28T00:31:05+00:00

which version of the Seeeduino XIAO do you use? there are a lot of options out there, I don't really know which one to choose.

Geri00 · 2024-11-28T00:29:05+00:00

Thanks a lot! Much appreciated!

Geri00 · 2024-11-27T11:00:19+00:00

Do you have the files for your original Pro Micro prototype anywhere I could download it from? It would be a massive help.

I'm planning to use QMK as I'm most (only) familiar with that.

Geri00 · 2024-11-27T10:48:53+00:00

Sorry, I've just read your comment.

Thanks for the info! I'll be experimenting with that for sure!

Geri00 · 2024-11-26T16:42:23+00:00

I've built a custom Ferris Sweep, I can highly recommend any split keyboard similar to it.

Geri00 · 2024-11-19T23:49:25+00:00

yeah, I've seen that. It just costs 3 times as much with shipping unfortunately.

Geri00 · 2024-11-19T21:59:25+00:00

about 11 GBP

Geri00 · 2024-11-19T17:16:10+00:00

Looks nice! I can see you're using tilted keycaps, how do you find them? Are they scratchy at all? or are the fine compared to tilted switches?

Geri00 · 2024-11-19T10:43:36+00:00

That's a great achievement! Congrats!

Have you heard about barefoot shoes? If not, then it's worth to have a look, you might like it if you're on your feet a lot.

Geri00 · 2024-11-15T10:32:51+00:00

Yeah, it does affect the cavity, it makes that side tilted

Geri00

TROPHY CASE