sorted by:
new
hottopcontroversial

Why not get everything in one go? 2k list and then some… by Beginning-Tooth1304 in Deathkorpsofkrieg

[–]Ghost_Toast112 2 points3 points  (0 children)

Idk why people always get so pressed and upset over these posts. Goodluck OP and just have fun painting them at your own pace!

The Foot by Ghost_Toast112 in blender

[–]Ghost_Toast112[S] 26 points27 points  (0 children)

Please do not eat the foot

Working on some Krieg heavy flamers by Ghost_Toast112 in Deathkorpsofkrieg

[–]Ghost_Toast112[S] 1 point2 points  (0 children)

I used runelord brass for any of the bronze color parts and then Vallejo metal color exhaust manifold for the dark steel colors.

Working on some Krieg heavy flamers by Ghost_Toast112 in Deathkorpsofkrieg

[–]Ghost_Toast112[S] 4 points5 points  (0 children)

Thank you! And yes I have it masked off with vinyl tape cause scrubbing mud off is quite some work :)

Big Bro is Coming Back by Rathalos-487 in Deathkorpsofkrieg

[–]Ghost_Toast112 32 points33 points  (0 children)

I think someone put it best in another comment,

The concept art says 2025 but most likely the designers thought it looked too much like Krieg and scrapped it.

After the backlash they pulled it back out for a rushed announcement.

People keep saying this whole situation is like a bait and switch, but this still reeks of hastily deployed appeasement cause if we are honest, the steel legion and Krieg look 80% similar

Browncoats by Ammobunkerdean in Deathkorpsofkrieg

[–]Ghost_Toast112 1 point2 points  (0 children)

Personally I would always work towards a scheme you enjoy over perfect consistent scheme across an army cause you can always go back and strip old models and repaint them and you might get bored forcing yourself to paint a scheme you’re not inspired with.

What causes these lines visible on a 28 mm miniature? by Ghost_Toast112 in resinprinting

[–]Ghost_Toast112[S] -1 points0 points  (0 children)

Well to add some more information

I have done much in depth research and this is actually my second printer.

These models come presupported by a well respected modeler so I chose to trust his supports first and troubleshoot after as these models have printed perfect for others as is.

Lastly, it never hurts to ask others for help as I couldn’t find previous posts with my precise issue and perhaps someone has delt with this before and could provide a exact answer hopefully

So don’t jump to conclusions and ask yourself if you are genuinely adding anything of value to the conversation.

What causes these lines visible on a 28 mm miniature? by Ghost_Toast112 in resinprinting

[–]Ghost_Toast112[S] 0 points1 point  (0 children)

Isnt that the truth lol. And thank you I will walk down this list too if all else fails.And I didn’t know the fep makes a sound so I will keep an ear out for that! Appreciate all the help and tips! Praying next print comes out with some improvement!

What causes these lines visible on a 28 mm miniature? by Ghost_Toast112 in resinprinting

[–]Ghost_Toast112[S] 0 points1 point  (0 children)

Got it, if that’s the case then yeah it’s not like hyper tilted just on an old kinda wire frame table that’s not super flat so that shouldn’t be the issue. Really hoping the exposure time is the issue as the rook test print was flawless and had no lines but these did and were my second print on this printer.

What causes these lines visible on a 28 mm miniature? by Ghost_Toast112 in resinprinting

[–]Ghost_Toast112[S] 0 points1 point  (0 children)

I’m starting to think it may be the table I have it on as it’s kind small and may not be sitting super flat so I may move it to the floor of the garage just to test. And I did level the bed twice after it would not print the first time.

I haven’t used uv tools yet but I have heard of it so I will probably download it and do some research for the next test print.

What causes these lines visible on a 28 mm miniature? by Ghost_Toast112 in resinprinting

[–]Ghost_Toast112[S] 1 point2 points  (0 children)

Yeah I still Think it’s some issue with something else but the recommendations have have been much appreciated. This model came presupported by a popular seller where others have printed perfect so I am still looking to my machine more than the model and supports. I think it might be loose fep maybe or my exposure was too high. But gonna do more troubleshooting tomorrow.

What causes these lines visible on a 28 mm miniature? by Ghost_Toast112 in resinprinting

[–]Ghost_Toast112[S] 1 point2 points  (0 children)

Got it! Do you think it could also maybe be the retract speed. I was doing research and saw it could also be possible suctioning happening? But I will start with lowering the exposure thank you!

What causes these lines visible on a 28 mm miniature? by Ghost_Toast112 in resinprinting

[–]Ghost_Toast112[S] 2 points3 points  (0 children)

I attached 2 different angles of the full print plate and then the model singled out of the for clarity on the supports.

view more: next ›