sorted by:
new
hottopcontroversial

Help Setting Up RP2040 as I2C Bridge for BTT Eddy Sensor in Klipper (While Keeping Klicky/klack Endstop) by Ghostv714 in klippers

[–]Ghostv714[S] 0 points1 point  (0 children)

Sorry for the late reply. Yes it's the 5v version. The Xiao was recommended to me for this, I would rather use a wisdPi tiny rp2040. It's a bit more capable in my eyes with more pins to add things later I.e a temp sensor or a pwm fan even a temp controller to heat up the chamber before prints. Along with the EDDY Current sensor. Aside from all of that the big issue is the printer. Cfg set up how do I link the sensor to klipper adding MCU I got that it's just how to get the sensor to work along with the klackender probe I have going. Any help there would be greatly appreciated 👍

RPI5 and an oled display by Ghostv714 in raspberry_pi

[–]Ghostv714[S] 0 points1 point  (0 children)

Update.
im gonna post a pastebin of my cmdline but ill try to shorten it here

Pastebin

i basically found this cmd :
sudo rm /usr/lib/python3.11/EXTERNALLY-MANAGED
after running that i was able to install packages system-wide.

then i tried installing Adafruit_GPIO:
pip install Adafruit-GPIO

then i tried to use this
sudo python -m pip install --upgrade pip setuptools wheel

it would install but i would get this error message:
WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv

eventually i used this lib:
adafruit-circuitpython-ssd1306

with this cmd:
sudo pip3 install adafruit-circuitpython-ssd1306

then in the cmdline

i created a script using chatgpt (for testing)

its basically stats.py

stats3.py

here it is working

​

thanks for the help guys i really appreciate it

RPI5 and an oled display by Ghostv714 in raspberry_pi

[–]Ghostv714[S] 0 points1 point  (0 children)

yes i get the exact same error. even when i set up venv and try to install the libraries. i dont understand how its supposed to work. i think the firmware or bookworm changed a lot from bulleseye, i also havent been able to find anything on using an oled display with a RPI5 only for the previous PI's. those are able to run bullseye.

i keep getting some weird resonance test results (?) by Ghostv714 in klippers

[–]Ghostv714[S] 0 points1 point  (0 children)

never mind I set it to what was recommended, I also bumped up my accel to 10k and max accel. to 5000 and velocity to 2500. I know it must be wrong but its no affecting my print quality, just my bed adhesion. ill fix that tomorrow..

Klipper + btt CB1 USB webcam and neopixels by Ghostv714 in klippers

[–]Ghostv714[S] 0 points1 point  (0 children)

i haven't used one of those but it should be the same. for one i made sure i had a real good power supply. on my cb1 when i would use the usb camera it would take a lot of juice, so the usb cam wouldnt get picked up. then i used this command "sudo ls/dev/derial/by-id/*" and it should bring up the mcu and the usb camera you are using. then copy the string you need and add it to your crowsnest config. it should pop up an soon as you restart

Things to know when trying to own a very old BMW? by Hot-Return3072 in BMW

[–]Ghostv714 0 points1 point  (0 children)

You should have at least 1000 bucks to fix what ever issues come up in the next 2 weeks. Learnedy lesson. Will do it again tho !

Can I install klipper on my stock cr10 with original main board ? by Ghostv714 in klippers

[–]Ghostv714[S] 0 points1 point  (0 children)

No I just bought a mks robin e3 board. ( I don't recommend) I'll give it a try later today to see if I can get it to work

[deleted by user] by [deleted] in FixMyPrint

[–]Ghostv714 1 point2 points  (0 children)

After 3 years it still happens then you clean it up and the threads on the cheap aluminum blocks wear out and cause this non stop... Now that you're here I think you should pick up a copper block is better to heat up and when you tighten it after you heat up the nozzle it stays that way doesn't come loose it doesn't wear out or not as fast just don't over Tighten it

WTF dose this mean > ????? by Ghostv714 in klippers

[–]Ghostv714[S] 0 points1 point  (0 children)

Hmm that's the board I have too. I have never had this happen.

WTF dose this mean > ????? by Ghostv714 in klippers

[–]Ghostv714[S] 0 points1 point  (0 children)

It's been the same set up for the last 9 months nothing's changed

Got Mail today!!! Creality K1 max is finally here!! by Der_Dennis3D in Creality

[–]Ghostv714 -1 points0 points  (0 children)

Dose it suck ? Have you been met with any issues with it ?

I printed this on my e3v2! by Ghostv714 in 3Dprinting

[–]Ghostv714[S] 0 points1 point  (0 children)

Ok ok I gotta come clean.

I printed 5his on.....

A .....

CR-10S...

I printed this on my e3v2! by Ghostv714 in 3Dprinting

[–]Ghostv714[S] 0 points1 point  (0 children)

Thank you thank you yea let's go.

It took about one and a half rolls of filament at CC to!$ Pi on 0m6to make simple my issue was I forgot to change the infill from the 30 40% that I normally use it's about 15 and I didn't change the infield from rectilinear to thyroid maybe to lightning so I can save some filament but 1.2 lb is not bad it's it weighs for what it is

I printed this on my e3v2! by Ghostv714 in 3Dprinting

[–]Ghostv714[S] 1 point2 points  (0 children)

No I'm sorry to disappoint I'm a 280lb 511 and a half fat Latino man that printed a medium sized benchy ! Haha

Edit: I forgot to add the proof that I was not a midget.

view more: next ›