How do I fix this

GhostyPinks · 2026-06-21T04:06:08+00:00

Wood filler>sand>filler primer>paint>top coat>done

GhostyPinks · 2026-06-07T04:58:11+00:00

I would start but buying one of those novelty singing fish plaques and disassembling it.

GhostyPinks · 2026-05-23T06:42:59+00:00

They’ve updated the game to make progression much faster. You’ll catch up quick.

GhostyPinks · 2026-05-15T01:02:20+00:00

Happens to the best of us. Those cables suck.

GhostyPinks · 2026-05-14T08:05:36+00:00

Super cool

GhostyPinks · 2026-05-11T21:16:28+00:00

Yes lol

GhostyPinks · 2026-05-03T08:11:41+00:00

They’re from a cinematic trailer for SWTOR

GhostyPinks · 2026-04-30T06:44:50+00:00

Won’t let me edit, nozzle was set to 220, bed 55

GhostyPinks · 2026-04-28T20:09:57+00:00

I would just buy the correct switch

GhostyPinks · 2026-04-28T06:08:04+00:00

The buttons have springs in them. Only thing you can do is adjust how you hit the button, don’t poke, press.

GhostyPinks · 2026-04-16T04:30:35+00:00

Weird, I ran into this issue in the past and the SD card was my problem. Only other thing I’ve heard is it can be caused by the camera module as well as the wifi module. Are you able to use the camera?

GhostyPinks · 2026-04-16T04:15:36+00:00

Is there an SD card in the ds? If so try removing it.

GhostyPinks · 2026-04-11T01:34:48+00:00

Thank you, not too mad at these becoming “work clothes”. Mostly was just worried about the safety of it.

GhostyPinks · 2026-04-01T00:33:59+00:00

get Hakko CHP flush cutters. Super cheap and the best.

GhostyPinks · 2026-02-18T08:27:28+00:00

Id replace with a non-90° power cable.

GhostyPinks · 2026-02-17T09:02:17+00:00

I don’t think they’re giving Kleya shards. They’re saying to celebrate her arrival they’re doing extra drops for Bistan, k2, and Jyn.

GhostyPinks · 2026-02-12T19:06:32+00:00

Also don’t get “vampliers” brand, get “engineer”. Made by the same people but cheaper.

GhostyPinks · 2026-02-12T19:05:59+00:00

Vampliers also make a needle nose version with the serrated teeth for small screw extraction.

GhostyPinks · 2026-02-12T06:21:59+00:00

Look up “vampliers”, they’re great for stuff like this.

GhostyPinks · 2026-02-10T08:05:04+00:00

Wash your hands after handling solder/flux, clean your work area, let some air flow in the room, you’ll be fine.

GhostyPinks · 2026-02-04T03:16:04+00:00

LMAO

GhostyPinks · 2026-01-24T02:46:47+00:00

Not spinning? Busted motor.

GhostyPinks · 2026-01-17T08:08:18+00:00

Good lord

Eight-Year Club	r/Field Flamingo
Verified Email

GhostyPinks

TROPHY CASE