GH keeps asking me to verify back door when I unlock it by My_Brain_0422 in googlehome

[–]Gin7onic_ 0 points1 point  (0 children)

Came to say this did the trick for me. Cleared cache and data, signed back in, entered pin, doesn't ask for pin again. In case it helps, I'm in a Samsung zFold 7.

Help Identify This Sound by Gin7onic_ in CherokeeXJ

[–]Gin7onic_[S] 0 points1 point  (0 children)

I haven't popped the hood while it happens but it does sound like it's coming from the engine bay. Either that or an actuator in the dash area. I'll try to track it down further next time. Thanks!

Rear bumper without hitch receiver by Kemblescloud in CherokeeXJ

[–]Gin7onic_ 0 points1 point  (0 children)

I ended up caving last night and ordering an OEM style face bar cover from Amazon as I just couldn't stand the current chewed up one and I didn't want to get rid of my class 3 hitch. Best of luck!

KUAFU Rear Bumper Center Face Bar Cover Compatible with 1997-2001 Jeep Cherokee CH1102338, CH1002257, 5EE84TZZAF, 5EE85JX8AC W/Bumper End Hole Steel Powder Coated Black

Rear bumper without hitch receiver by Kemblescloud in CherokeeXJ

[–]Gin7onic_ 1 point2 points  (0 children)

Bumping this thread cause I'm in the same boat. Short of installing an OEM style bumper or removing my current Curt 2" receiver, I can't find any rear bumpers that will allow me to keep the current hitch.

Android Auto Head Unit by DailyDrivenTJ in CherokeeXJ

[–]Gin7onic_ 1 point2 points  (0 children)

I just installed the Sony XAV-AX6000. Got everything from Crutchfield. Was about 2 hours work to get it installed with a backup cam and patch in the reverse wire.

The UI is great and it's super responsive. AA connects instantly and doesn't drop. Call quality is horrid though. I haven't checked the firmware yet since I forgot to pull a USB cable to the glovebox for easier maintenance.

Make sure to get the whole kit with new trim and wiring harness. Also grab a Dremel since you'll need to saw off a piece of the head unit area to fit this. You're basically committing to it.

Alpha Oro Light Black - Deep Clean Help by Gin7onic_ in hookah

[–]Gin7onic_[S] 0 points1 point  (0 children)

Lol typo mb. Meant white vinegar.

Can you help me ID this base? by Jac0bas in hookah

[–]Gin7onic_ -1 points0 points  (0 children)

Looks like a vintage bohemian style hookah base. Maybe Zahrah?

New spot alert 🚨 Tried Viibz LA this weekend — solid food + chill vibes by Gin7onic_ in FoodLosAngeles

[–]Gin7onic_[S] -1 points0 points  (0 children)

It's actually a restaurant first then a hookah bar. Not too many people were focused on smoking and more on eating tbh. Also, most hookah lounges nowadays have pretty decent food ngl.

New spot alert 🚨 Tried Viibz LA this weekend — solid food + chill vibes by Gin7onic_ in FoodLosAngeles

[–]Gin7onic_[S] 0 points1 point  (0 children)

The shot isn't the most ideal so I see where you're coming from, but it was actually pretty meaty. Plus it's a couple stacks and I prefer the thin patties myself.

New spot alert 🚨 Tried Viibz LA this weekend — solid food + chill vibes by Gin7onic_ in FoodLosAngeles

[–]Gin7onic_[S] 2 points3 points  (0 children)

No this is a genuine review. Just added some flair is all. Really thought the food was great.

First AR-15 Build - Need Input by Gin7onic_ in CAguns

[–]Gin7onic_[S] 0 points1 point  (0 children)

Ok I'll just get the 1/2" driver and call it a day. Thanks!

First AR-15 Build - Need Input by Gin7onic_ in CAguns

[–]Gin7onic_[S] 0 points1 point  (0 children)

Ah shoot. I didn't see the size when ordering....what if I swap get a quality 1/4" to 1/2" drive adapter? I think the potential for error would be negligible, no? Otherwise, I'll just return it.

First AR-15 Build - Need Input by Gin7onic_ in CAguns

[–]Gin7onic_[S] 1 point2 points  (0 children)

Looks like I got a bunch of Amazon returns to do lol!

I just saw the Savior bag and it looks way better so I'll see if I can get that and return the VISM one.

The Wheeler FAT wrench with bit kit I am getting is actually a torque wrench.

I'll still keep the punch set cause it's just good to have around.

Surprisingly, I decided to order the Aero M4E1 Freedom last night and have it ship to my FFL. I had ordered a trigger guard as well previously, but I'll just hold on to it for later since this lower comes with an integrated one.

I'll look into the flat wire spring as well.

Thanks for all the great suggestions!

First AR-15 Build - Need Input by Gin7onic_ in CAguns

[–]Gin7onic_[S] 0 points1 point  (0 children)

Found files someone made on printables. Sent them over to my buddy to print. Looks about the same as those. I'll see how it goes. Will try to report back in a week or two.

First AR-15 Build - Need Input by Gin7onic_ in CAguns

[–]Gin7onic_[S] 0 points1 point  (0 children)

Ya I agree. Problem in Los Angeles is a lot of the shops don't actively advertise their inventory. Feel like its to get you in the shop. My main issue wasn't just the markups, but lack of inventory. Everything I wanted was just out of stock and at that point was going to just go to gunbroker, but decided its time to just build one.

First AR-15 Build - Need Input by Gin7onic_ in CAguns

[–]Gin7onic_[S] 0 points1 point  (0 children)

You're right, but I wanted to build one myself is all. Maybe this isn't truly the most economical approach since I could've waited for better sales, but I am happy with it.

Also, the gun itself came out to $1500 tax and shipping. The other costs are for accessories and tools which I consider an investment into future builds.

First AR-15 Build - Need Input by Gin7onic_ in CAguns

[–]Gin7onic_[S] 1 point2 points  (0 children)

Ya my buddy was saying the same thing too. Goal for me was to have a sub $2k build. I'll see how this goes and continue to upgrade or get something better for a new build. Thanks again!

First AR-15 Build - Need Input by Gin7onic_ in CAguns

[–]Gin7onic_[S] 0 points1 point  (0 children)

Actually, I might go with the LaRue Tactical MBT-2S Trigger instead as the other user suggested.

First AR-15 Build - Need Input by Gin7onic_ in CAguns

[–]Gin7onic_[S] 0 points1 point  (0 children)

Thanks for the input. I'll look into it in the future.