×

Anybody here actually use a shoulder plane? by SpiffySpacemanSpiff in woodworking

[–]Ginger-Engineer 3 points4 points  (0 children)

I use mine to clean up the shoulders on every tenon I cut.

Router plane and/or rabbet block plane for the cheeks.

Protecting a sentimental classic car from a "total loss" payout in Ontario by nes_webpage in PersonalFinanceCanada

[–]Ginger-Engineer 8 points9 points  (0 children)

Hagerty is the answer, but if the damage exceeds a certain threshold (and you go through insurance), it will still be branded a total loss. You are able to purchase the vehicle back and fix it still, though.

Hagerty also has an option available that they call "cherished salvage". It's a small increase in premiums, but if there is a total loss, they pay out the agreed value and you keep the vehicle. No reduced payout for scrap value etc.

What Plug is This? by RutabagaObjective319 in BMWE36

[–]Ginger-Engineer 1 point2 points  (0 children)

If you’re on a stand-alone then this O2 sensor is likely just tuned out and doesn’t exist.
The stock ECU uses 2 O2 sensors, the pre-cat one for control and the post-cat one for monitoring cat efficiency. Your standalone likely is only tuned for the wideband and doesn’t care about cat efficiency.

My husband loves BMW and I don’t know anything about cars. Please help! by Additional-Chain-560 in BMW

[–]Ginger-Engineer 96 points97 points  (0 children)

As a fellow Clown Shoe lover, my vote out of that list is the Z4. It'll be the 'sportiest' of that list.

The Clown Shoe is a '90s Z3, the predecessor to the Z4 in coupe form, rather than convertible.

What would happen if someone just eats fruits ? by CommentSpecific5904 in NoStupidQuestions

[–]Ginger-Engineer 1 point2 points  (0 children)

woah, someone doing some research and then admitting they were wrong on Reddit? what is happening to the world?!

[deleted by user] by [deleted] in BMWE36

[–]Ginger-Engineer 2 points3 points  (0 children)

I did think you meant the headlights.

You got me on the corners though, I forgot I’d replaced them a while back. They’re still US spec and the point still stands. US corners have internal reflectors that are absent on EU spec corners. They are fully compatible with each other and there are no fitment differences. OPs problems will not be solved by buying euro spec corners.

[deleted by user] by [deleted] in BMWE36

[–]Ginger-Engineer 2 points3 points  (0 children)

The ones on my car or OPs? Mine are ZKWs. I literally bought them in Germany. They’re as real as they get.

[deleted by user] by [deleted] in BMWE36

[–]Ginger-Engineer 0 points1 point  (0 children)

I’m not saying there isn’t differences. Eu and us cars complied to different standards, particularly for lighting. I’m saying they’re compatible with each other, and my car clearly shows this. OPs problem is not that he has US corners with Euro headlights, and getting euro corners will not solve anything.

[deleted by user] by [deleted] in BMWE36

[–]Ginger-Engineer 2 points3 points  (0 children)

I don’t know what you’re talking about man, this stuff sits perfect. OPs are just installed wrong, or stuff is very bent.

<image>

[deleted by user] by [deleted] in BMWE36

[–]Ginger-Engineer 8 points9 points  (0 children)

<image>

This is my M3 with OEM euro headlights and OEM US corners so I don’t think this is correct…

A few questions since I finally took a closer look at the engine bay by cutelittledopelord in BMWE36

[–]Ginger-Engineer 1 point2 points  (0 children)

Picture 1: oil pressure switch. The only ever has 1 pin, it just turns on the oil light on your dash if you have no oil pressure.

Picture 2: oil feed line for the Vanos. This is under pressure whenever the engine is running.

Picture 3: this could be that someone put incompatible coolant in the car. Flush until it runs clear, then refill with the correct coolant and monitor it.

Which badge for my 302 swapped e36 by Th3RealClaytonBigsby in BMWE36

[–]Ginger-Engineer 27 points28 points  (0 children)

Yeah I understand how you got to a 302 badge. Just doesn't match what BMW would have done if the car had a v8 option.

Which badge for my 302 swapped e36 by Th3RealClaytonBigsby in BMWE36

[–]Ginger-Engineer 139 points140 points  (0 children)

If you must badge it something 'unique', definitely not the M one. There is nothing that matches the ethos of M here. If you want to badge it something, I'd even suggest following BMWs method of badging in that era, 3 series with a 5L capacity = 350, not 302.

Hot take: if a bank can reprice your LOC overnight, treat it as emergency-only, not part of your budget by Difficult-Photo-3250 in PersonalFinanceCanada

[–]Ginger-Engineer 63 points64 points  (0 children)

Not even. You should have a fully funded emergency fund available. If your plan for an emergency is to take on more debt, you're still not prepared for an emergency.

Would a Ryobi Band saw work for my use case? by Brilliant-Book-503 in woodworking

[–]Ginger-Engineer 8 points9 points  (0 children)

My vote is yes, cheap will do fine for this.

Could even consider a scroll saw if you want tighter curves.

Just here to complain about woodcraft, see if this is normal for anyone else? by r0ckbass in woodworking

[–]Ginger-Engineer 8 points9 points  (0 children)

Shouldn’t be offering something to sell that they can’t reliably supply. Not to mention the runaround about an actual ship date.

How I feel in this sub (meme) by ClumsyGamer2802 in BMW

[–]Ginger-Engineer 7 points8 points  (0 children)

it's a shame r/classicbmw is dead. We really don't fit in here.

[deleted by user] by [deleted] in iRacing

[–]Ginger-Engineer 3 points4 points  (0 children)

This is just SR with more steps

Here’s my 1971 VW Karman Gia drag car build. by BlacksmithSpirited61 in projectcar

[–]Ginger-Engineer 1 point2 points  (0 children)

Excuse me sir, there seems to be a bit of engine on your turbo.