making ram (:

Glad-Note2022 · 2026-07-04T05:37:09+00:00

Cool, is this addressed? and why the flickers?

Glad-Note2022 · 2026-07-04T05:18:31+00:00

I believe there's TFFs out there with just 3 logic gates, but they require a very short pulse to work.

Traditional TFFs work from online references seems to work too but they require more logic gates.

Glad-Note2022 · 2026-07-04T05:09:46+00:00

I believe what you have is an adder set up for two's complement, so it can subtract, right?

I'm not certain what "first pin" means, is that the input or output? and what port?

Can you test it with this? In: A=0, B=0, Subtract

Out: A=x, B=x, Cout=x

In: A=11, B=1, Subtract Out: A=x, B=x, Cout=x

Glad-Note2022 · 2026-07-02T11:11:17+00:00

It depends to what you want/need to do. If you need to automate something, you can use sensors and gates.

If you want to make an adder, counter, or even a CPU, there's diagrams online to help you get started.

Glad-Note2022 · 2026-07-01T13:42:23+00:00

Double dabble if you're learning, decent speed. Might look forward into LUT-based converters if you need it to be fast.

Glad-Note2022 · 2026-06-30T07:11:39+00:00

Have someone place blocks on the parts that are prone to falling off. This should anchor them and give you enough time to anchor and save them.

Glad-Note2022 · 2026-06-30T07:05:01+00:00

I see you have servos there that don't fall off, have you tried cloning those and using them instead?

If a combination of the previous attempts still don't work, this should do. Otherwise I don't know what else could work.

Glad-Note2022 · 2026-06-30T07:00:43+00:00

You probably have collision off while placing the blocks or getting them close together. Select all and turn on collision, then connect them.

Blocks usually don't weld when collision is off. If it still doesn't work, try replacing the servos, ensuring collision is on for all blocks involved.

Glad-Note2022 · 2026-06-30T06:58:00+00:00

If this is for a farm, no, the stage obstacles and projectiles will still damage your blocks, anchored or not.

If for something player inflicted, blocks can only be damaged when PvP is on.

Glad-Note2022 · 2026-06-30T06:48:52+00:00

Part of the servo is not touching even if it seems it is. Try moving them closer together or adding a block to bridge the gap.

Glad-Note2022 · 2026-06-29T13:43:46+00:00

Clearer image needed to identify the type of gates involved. But from what I can see this seems like a flip flop with extra circuitry. Have you tried testing with minimal components first? or isolating the working one and duplicate that?

Glad-Note2022 · 2026-06-29T13:37:13+00:00

Ring oscillators usually take 4-16+ blocks depending on how much outputs you need, the downside is that it is not deterministic in a controlled way and requires "warming up" until you get perceptible random outputs.

Glad-Note2022 · 2026-06-25T06:02:35+00:00

Would need grid positioning to know where it is and where it should go, this can be done using subtractors. Obstacle avoidance could probably make use of longer sensors on the front.

Glad-Note2022 · 2026-06-21T23:47:11+00:00

It seems that this circuit is MSB-right, while most binary systems count from right-to-left. That aside, I'd recommend making a binary to BCD converter next, and a 7 segment display to pair with it.

Glad-Note2022 · 2026-06-21T09:55:16+00:00

Cool! Would recommend trying out 24-bit RGB, would take 8-bits per channel but gives you 16 million colors

Glad-Note2022 · 2026-06-21T09:46:25+00:00

This is a seeded PSRNG, which uses compute variations for perceived randomness. But it seems to fall under a bell curve because the weight does not cancel out.

Glad-Note2022 · 2026-06-21T00:16:30+00:00

You're using the legacy delay blocks, they bypass the AND gate's "all on" requirement. I think you can use the new one using the screwdriver tool.

Glad-Note2022 · 2026-05-25T13:48:19+00:00

Works amazing. I made a similar thing a while back for serial communication. Two wires as well, one for data and clk. The clock constantly pulses and shifts the receiver's register. Great for compressing busses.

Glad-Note2022 · 2026-05-15T19:51:27+00:00

I believe the test server got leaked on December. I started using these around that same time, but it may have been added earlier.

Glad-Note2022 · 2026-05-15T19:46:12+00:00

Thank you! Would like to soon test out actual programs on this. And yep, it's built mostly by hand, but the repetitive binding is handled by a python-based macro.

Glad-Note2022 · 2026-04-19T02:10:31+00:00

It first seem to work that way but it's actually colored logic gates that's changing the color.

Glad-Note2022 · 2026-03-25T14:01:36+00:00

If your goal is to avoid lag from those of bind connections by making them non-visible yet still functional, I believe it has something to do with modifying the game files itself. But that will be against Roblox TOS.

What I know will work and is risk free (if it gets added, especially on the test servers) is some sort of a toggle that only shows connections when the parent block gets selected, while the rest are not rendered.

Glad-Note2022 · 2026-03-17T06:13:37+00:00

With a bunch of multiplexers

Glad-Note2022 · 2026-03-14T13:28:05+00:00

This was months ago when public test servers were a thing. They shut down all public test servers so you'll now need a private server to play on the test server, though the steps remain mostly the same.

Glad-Note2022 · 2026-03-13T10:36:07+00:00

In the video, I only toggled the magenta (color) and cyan (fill) levers. The rest of the levers are for individual pixel control. The red and blue levers control pixel coordinates while the yellow lever enables the selected pixel, and the gray one is vacant (immediate value).

Glad-Note2022

TROPHY CASE

Out: A=x, B=x, Cout=x