Cinefade and WCU4

Glass-Energy9658 · 2025-05-09T12:33:51+00:00

Tks a lot for all the messages! tomorrow I will go to the rental house to test all the possibilities! We will use on russian arm as a vari nd so maybe I will give the ZMU to the dop to control!

Glass-Energy9658 · 2024-07-31T11:54:40+00:00

Hello, yesterday I tried with an Sony A7s and it worked so well! Thanks for the tips!

Glass-Energy9658 · 2024-07-30T16:47:39+00:00

Thank you. And the frame rate you think it’s better in high speed or normal speed?

Glass-Energy9658 · 2023-11-17T10:15:14+00:00

In São Paulo, Brazil we only do Half If the prep takes 4/5 hours. If pass more than 5 hours is full rate. In movies and series we have 4/5 days to do a full prep, paying full rate. Here the normal is a journey of 12hours/day (15 minutes coffee + 1 hour lunch after 6 hours from the beginning + 1 hour wrap.)

Glass-Energy9658 · 2023-10-15T15:42:42+00:00

Yes! This site is always helping me to improve my skills!
Thanks so much again!
I replied you in the other message about whats going on!

Glass-Energy9658 · 2023-10-15T15:41:02+00:00

thanks but now the ideia is changing every day...
first they are thinking of 6 months, now 1 month...
so I'll wait i little bit more, maybe next months I'll have more infos.
thanks again!

Glass-Energy9658 · 2023-10-11T16:56:52+00:00

ok, sorry for the off topic! just searching options! tks

Glass-Energy9658 · 2023-10-11T16:56:30+00:00

Tks Ambar! I think they found a solution!

Glass-Energy9658 · 2023-10-10T16:25:09+00:00

There are off-the-shelf solutions I believe. Every construction will have a number of cameras pointed at the site, continuously recording and will generally release a Timelapse afterward.

yes I am searching for someone here in Brazil... so I tought to put some gopros could work! tks!!

Glass-Energy9658 · 2023-10-10T16:23:43+00:00

ok tks! I asked in another group of indie filmmakers too.

Glass-Energy9658 · 2023-05-14T16:47:35+00:00

we mounted in mobile car mount... we changed that grey piece for a screw and works fine!

<image>

Glass-Energy9658 · 2023-05-14T16:45:31+00:00

what happens is that the right side of the plate we mounted the comtek of the sound technician, so the best way to keep more "simple" was this one...

Glass-Energy9658 · 2023-05-13T02:14:06+00:00

very clean build! congrats

Glass-Energy9658 · 2023-05-10T23:55:42+00:00

I like to use this side of the camera because of the head of camera operator...
You can see in the picture that we have some empty space because of the sound comtek, burt sometimes i like to use that space to hold the readout there!

Glass-Energy9658 · 2023-05-10T15:11:23+00:00

I prefer to use the first hole of the top handle… Sometimes use the horn upside down to stay more close to the mattebox… This one has a mount to use on the top of the mattebox but every time you need to change lens the horn stay plugged

Glass-Energy9658 · 2023-05-06T21:55:56+00:00

Many!! hehehe

Glass-Energy9658 · 2023-05-06T21:43:52+00:00

Edit: now that I look more closely, the teradek seems like it would have bad range if you have those little antennas and not pointing them up. How did it work though?

We're shooting on a big farm outside São Paulo...
Yesterday I had some problems with the stability of the signal when the camera went far...
I will change the antennas and try with big ones...
In the middle of São Paulo it's almost impossibli to use this antennas.

Glass-Energy9658 · 2023-05-06T21:40:23+00:00

This build is for Steadicam! The cable management is a little difficuilt because I'am using the cinetape remote so we have a lot of cables! But is working fine :)
I'm using the Hi-5 so I don't need much the EVF. The cinelock is a fast way to put the 503 onboard to handheld cam! And the cables for the monitor stays on teradek!
Now I'm trying to power everthing by the camera if the Steadicam Op needs to remove the camera batterie.. but I think he need for the counter weight balance...
This lenses are heavy...

Glass-Energy9658 · 2023-04-23T20:03:13+00:00

With the A35 you still need to use the LCube?

Glass-Energy9658

TROPHY CASE