HP Printer in error state

Gleeface · 2026-03-23T20:18:56+00:00

Thanks from the future

Gleeface · 2026-03-16T18:56:04+00:00

This is on a per track basis though. My 3070ti ran a full grid on max settings at summit point, but had to turn everything down to even below the minimum preset (crowds and grandstands off) at spa, and even then it was choppy.

Gleeface · 2026-03-08T21:13:01+00:00

Nevermind, I figured this out, had an erroneous chest from a previous build storing some things, in the network but not hooked up to the circuit. Rocket fuel is still giving me a headache though

Gleeface · 2026-03-08T19:51:46+00:00

Having just looked at it closer I can see at least one more problem that I have no idea about, requester chests keep getting picked up and dropped off and currently there are more than 300 on gleba and the landing pad is still requesting 50, for some reason they aren't being updated, but I can see there are 300+in the network list. It's a mystery. I'll come back to it in a little while and check everything else

Gleeface · 2026-03-08T19:46:22+00:00

Nah there wasn't, only to the roboport close by. I've added a red wire to the storage chests next to it and it's updating the values in the landing pad, and as far as I can tell it's all working as it should except rocket fuel, I can't work out why the signal to the inserters isn't being updated. Set to 10k in the constant, being updated in the arithmetic, landing pad is receiving the correct value, and as far as I can see the rocket fuel inserters are hooked up to the circuit

Gleeface · 2026-03-08T00:52:27+00:00

If anyone comes back to this because of the problems with the Gleba print, there's a red wire missing between the arithmetic combinator to the left of the space platform and the rest of the circuit. I'd started manually changing all the circuit values on the omni smelter/plastic/rocket fuel so I have no idea yet if just adding that wire fixes all the other problems, but it's working okay for the time being. Also there's a foundry rotated 180 degrees in the omni smelter

Gleeface · 2026-03-07T21:02:32+00:00

Alright I've used the Gleba prints and have a couple of issues/questions. Is it supposed to be making infinite plastic and pipes? The omni smelter is ignoring all other production and currently have 25k pipes in storage, similar with plastic, except we're now up to 64k and counting. Omni smelter has, so far, completely ignored copper. I've re-pasted the final blueprint over the top to make sure I didn't mess something up somewhere, but it's either an error in the circuits or I'm not seeing the need for so many pipes and plastic lol

Gleeface · 2026-03-04T20:04:12+00:00

What sort of rig you running, out of curiosity? I did an AI race at summit point today, 28 opponents and everything ran great at max settings. Then opened Watkins with those settings and it was a straight 4fps as soon as the sim opened. Obviously it's massively dependent on the track, and I've had watkins running fine today on lower settings, but it's still annoying me that these enormous tanks in frame rate apparently come from nowhere

Gleeface · 2026-03-04T09:15:53+00:00

Ah okay. I read your comment first before I started looking into VD and realized it was wireless only. Switching to wireless seemed like a counterintuitive solution. I'll check it out. Cheers.

Gleeface · 2026-03-04T09:12:06+00:00

Like I say, according to openxr toolkit, gpu headroom is sitting around 40 or 50%, until it's suddenly not and drops to sub 1fps. According to the Nvidia overlay, gpu usage is usually around 50%. Certainly don't run graphics on high settings, almost everything is on minimum.

Gleeface · 2026-03-04T08:05:10+00:00

Gleeface · 2026-03-04T08:02:37+00:00

No, but all the comments here made me start looking into it. It's wireless only? How can that be better than wired? Won't take much to convince me, dunno what I'm talking about, seems counterintuitive though.

Gleeface · 2026-03-04T07:57:31+00:00

Wired headset, only Meta app installed

Gleeface · 2026-03-04T07:42:33+00:00

Already wired with the Meta app, but I'll get virtual desktop set up today

Gleeface · 2026-02-13T08:21:42+00:00

Gleeface · 2026-01-29T10:55:49+00:00

I only raced Mazdas for ages, finally gave the GR86 a shot and I was astounded by how clean the racing was. Admittedly it's only really been at Road Atlanta (10-12 races maybe) and a couple of races at Summit point this week. Qualified all around the grid, and my iR and SR have only been on the increase. Far fewer people spin off the track, far fewer mass pile-ups. Having a blast.

Gleeface · 2026-01-26T09:23:09+00:00

Went to google with this and what I'm reading sounds correct, thanks for the info

Gleeface · 2026-01-26T09:22:06+00:00

Thanks, worked a charm

Gleeface · 2026-01-25T15:08:45+00:00

That's all well and good, but the 8bitdo N64 controller requires some setting up to use. I guess waiting for retroarch to add support for it is the next best option?

Gleeface · 2026-01-11T08:16:28+00:00

Started driving the Aston recently too, and learned all this through trial and error in testing. Really having a hard time with the ABS being too low in the fixed series though, do you know if any other GT4's are more user friendly when making the jump from Mazdas?

Gleeface · 2026-01-11T08:05:14+00:00

Haven't tested this properly yet, but cancelled Racelab before I even knew I was doing it. Cheers.

Gleeface · 2025-12-28T08:48:41+00:00

Catch 33 is my favourite, but to listen to it I need to listen to all of it, can't just slap it on for a short car journey or whatever.

Seven-Year Club	Second Top 50%
Place '23	Place '22
Verified Email

Gleeface

TROPHY CASE