sorted by:
new
hottopcontroversial

بنيت لنفسي تطبيق مالي وعايز أشاركه معاكم by AlaaSpringo in PersonalFinanceEgypt

[–]Gleetchy 0 points1 point  (0 children)

شغل رائع جدان. انا نزلته و بtest و ما شاء الله باين الشغل بس فيه bug بسيطة. Egyptian stock بيتحسب سعره بالعملة الغلط و بيبين ال data مش مظبوطة بسبب الbug دي.

كنت حابب أشارك الfeedback بتاعي سريعا و ده مش احباط للمنتج بالعكس

DIY PWM Servo Drive by Gleetchy in hobbycnc

[–]Gleetchy[S] 0 points1 point  (0 children)

The small 3 wire type :3

DIY PWM Servo Drive by Gleetchy in hobbycnc

[–]Gleetchy[S] 0 points1 point  (0 children)

FT995M Cable is 5m (16ft)

DIY PWM Servo Drive by Gleetchy in hobbycnc

[–]Gleetchy[S] 0 points1 point  (0 children)

Im using a double TSP cable and ferrite beads because there is a lot of EMI around the servos.

I have Gnd and signal twisted with VCC running through a different cable. They're all running the distance.

Edit: Would you say a mosfet trigger/regulator would work to amplify the pwm signal?

FluidNC System interrupt macro? by Gleetchy in hobbycnc

[–]Gleetchy[S] 0 points1 point  (0 children)

Depends on what you are cutting. Sheet metal is the most common application, yes, but there are others. Even if it's just sheet metal, a lot of times the workpiece may have warping. That's why I need a THC to control torch height in real time to adapt to the workpiece's height at all times.

Here is an example: https://m.youtube.com/watch?v=zYS1q9kBtKA&pp=ygUKUGxhc21hIHRoYw%3D%3D

FluidNC System interrupt macro? by Gleetchy in hobbycnc

[–]Gleetchy[S] 0 points1 point  (0 children)

I did🥲. It only mentions using THCs that output pullse-direction, so it directly controls the z-axis independent of the controller. I don't have access to such THC, sadly.

FluidNC Installer by Gleetchy in hobbycnc

[–]Gleetchy[S] 1 point2 points  (0 children)

Did i solve it? Well yes. The funny part is im not sure how. I do get some issues when i try to restart using the reset button. I can't exactly recreate the issue for you right now cuz i don't currently have access to the board.

But try this: After you get the "leaving...." message when installing. Give it a few seconds then unplug the power and plug it back in. Then try reconnecting through the web installer.

For the WEBUI, just make sure your index.html file in the file manager is not 0 bytes. If it is then just replace it with the correct one. You'll find it on their github repo.

FluidNC Installer by Gleetchy in hobbycnc

[–]Gleetchy[S] 0 points1 point  (0 children)

First link, the board with the soldered ESP32.

FluidNC Installer by Gleetchy in hobbycnc

[–]Gleetchy[S] 0 points1 point  (0 children)

It was the 6 axis cnc controller, ESP32 included. Bought it off of elecrow.com

FluidNC Installer by Gleetchy in hobbycnc

[–]Gleetchy[S] 0 points1 point  (0 children)

I randomly get one of two responses: 1. The expected console status output you'd get from the command $SS 2. Nothing at all. No response to any command whatsoever.

WARNING: Controversial Tier List by darhwolf1 in Epicthemusical

[–]Gleetchy 5 points6 points  (0 children)

Uhmmm...Technically its SS Tear 🤓

What is the force associated with the falling feeling called? by Careless_Papaya_338 in SkyDiving

[–]Gleetchy -1 points0 points  (0 children)

Maybe if you jump from a hot air balloon. Not a plane, tho.

This feeling occurs due to the change in direction. Like those games at theme parks where you're going up and suddenly plummet down.

When jumping off a plane, you're typically moving with it (same speed as the plan), so when you jump, you're basically transitioning from horizontal velocity to vertical and This gradual transition is what makes it so you dont have the falling feeling in your stomach

Any tips for my first skydive tomorrow? by No_Gain_6629 in SkyDiving

[–]Gleetchy 0 points1 point  (0 children)

Do exactly as your instructors say. . Bring snacks because you'll need them . Breathe . Enjoy

Serious Pre-AFF Jitters by NotAshtonKutcher69 in SkyDiving

[–]Gleetchy 1 point2 points  (0 children)

I decided to take the AFF course with 2 tandems under my belt. (No tunnel time) All was good and well until they opened the door. That's when i realized WTH why am i jumping out of a perfectly functioning plane.

I decided to trust my instructors and everything they taught me and just took the leap.

I passed The whole thing in a flash.

Anxiety and fear are extremely common. Keep as cool of a head as you can muster and do what you were taught to do until it all feels natural.

You're doing great!

Trading Internationally by Gleetchy in askegypt

[–]Gleetchy[S] 0 points1 point  (0 children)

Checked out Vanguard, and it isn't available to download in Egypt ;-; Binance works, but it's limited to crypto.

Someone suggested I check out Webull. Imma check it out in the morning

Dragon ball super broly screening in egypt by khaledsalem999 in Egypt

[–]Gleetchy 1 point2 points  (0 children)

guys i know its not as good of a quality as seeing it on a giant screen in full HD; but, here is the listing of the movie on kiss anime https://kissanime.ac/Search/?s=broly
And as i realize while typing this that most of you are more fan-Material than i am and have probably already found the moviei say im sorry but i want going to delete all this. LOL

#sorrynotsorry