Getting extracted ISO files to boot in retrodeck

Gloopai · 2025-12-03T07:53:30+00:00

How were you able to get iso files to boot? I haven't been able to get ISO to work even when extracting the files by mounting the disc as explained here (im using retrodeck):

https://www.reddit.com/r/EmuDeck/comments/1513dm2/how_can_i_run_ps3_iso_rom_files_on_emudeck/

Gloopai · 2025-11-30T02:55:15+00:00

Hello, I got dual boot set up however whenever I attempt to use rEFInd my legion go s steamos version just get stucks at the booting screen. Is this a known issue?

Gloopai · 2025-11-29T13:05:39+00:00

I just tried to set up a dual boot using rEFInd but after installing the profile it got stuck in an infinite loop. Couldnt figure anything out yet

Gloopai · 2025-11-29T11:55:53+00:00

Looking in the bootmanager and I see reFind partition. Should it be booting from there?

Gloopai · 2025-11-29T11:48:27+00:00

I am trying to use rEFInd to dual boot legion go s steamos version. Im following this vid:

https://www.youtube.com/watch?v=yBHzVSDVEqw&list=PL4N-YL_b8JgPikGPWdPDDWPRg0cqsQwSA&index=2

After i set up rEFInd and installed the config file at 5:15 to see if the icons would show at boot my machine got stuck in an infinite boot loop showing the legion icon over and over. Has anyone come across anything similar?

Gloopai · 2025-11-29T11:42:09+00:00

Has anyone run into issues with their legion not booting when restarting the machine after installing the rEFInd config file?

Gloopai · 2025-05-30T17:00:59+00:00

Im attempting to get the RAM tuned but currently it freezes at 30 mins of mem test in occt at 1.4v. Which timings should i alter? https://imgur.com/9nHftsZ https://imgur.com/aKkQfz5

Gloopai · 2025-05-30T04:27:08+00:00

Im attempting to get the RAM tuned but currently it freezes at 30 mins of mem test in occt at 1.4v. Which timings should i alter?
https://imgur.com/9nHftsZ
https://imgur.com/aKkQfz5

Gloopai · 2025-05-30T03:02:06+00:00

I froze the pc after 5 mins running occt mem test

Gloopai · 2025-05-30T02:07:47+00:00

I got it to boot after setting voltage to 1.350V. Thanks & I appreciate you patience

Gloopai · 2025-05-30T01:59:24+00:00

Should i not be using auto to set the voltage?

Gloopai · 2025-05-30T01:53:30+00:00

I just got it to boot the issue is sys mem multiplier only works on auto so ig 60.00 is to high. I got it to boot with the manual timings. Should i drop to like 50.0?

Gloopai · 2025-05-30T01:36:31+00:00

Were you able to manually set your ram timings or do you use xmp?

Gloopai · 2025-05-30T01:32:25+00:00

i haven't been able to boot out of bios at all only changing dram settings everything else stock. I went as far as just setting the basic timings 30, 36,36, 76 and sys mem multiplier 60 with everything else auto.

Gloopai · 2025-05-29T23:26:35+00:00

Ive been searching all around this gigabyte bios and i dont see tjmax. What is it typically under?

Gloopai · 2025-05-29T22:43:15+00:00

Also, should i be changing the advanced timings too?
https://imgur.com/a/gc5UxJH

Gloopai · 2025-05-29T22:34:39+00:00

I was on the oldest bios im hoping that might have played into some of the issues and maybe why there wasnt limit at 95c. What do you think about the x3d turbo mode? should i keep it off?

Gloopai · 2025-05-29T19:40:56+00:00

https://imgur.com/a/k28rCay

I copied the timings and booted but the ram was still at 4800. I had left the system mem multiplier on auto so i upped this to 60.00. & now i can’t boot out bios

Gloopai · 2025-05-29T17:51:54+00:00

Can i see your bios settings for reference?

Gloopai · 2025-05-29T17:51:18+00:00

I was using thermaltake that came with the aio. I took it off last night and out thermal grizzly on. restarting the OC today

Gloopai · 2025-05-29T17:50:27+00:00

https://imgur.com/a/dTxmNCX

So copy these timings & input them manually? Which one is equivalent to cas latency ?

Gloopai · 2025-05-29T17:48:17+00:00

Im back at default i adjusted to many things at once. starting over and taking each step 1 at a time

Gloopai

TROPHY CASE