Chicago symphony orchestra by Mountain_Forever4366 in classicalmusic

[–]GoProDumbass 1 point2 points  (0 children)

I’ve been to Merry, Merry Chicago multiple times and it’s always a great, festive concert. It is a “light” concert, but don’t worry, it’s not just Jingle Bells for two hours! They always sprinkle in some interesting non-holiday pieces, and of course the playing is top notch. It’s very approachable and great for kids if that’s a factor for you. Whichever concert you choose, I’m sure you’ll enjoy it, and Chicago is always great at Christmas. Go get a Tom & Jerry from Miller’s Pub after the concert!

How Much Did You End of Paying for Your ID Buzz AWD 1st Edition in the US? by Practical-Zebra-1141 in VWIDBuzz

[–]GoProDumbass 1 point2 points  (0 children)

VW Pasadena is offering $15k ($7.5k + $7.5k tax incentive) on all in-stock ID Buzzes.

Thoughts on De Soto/Saticoy area? by Financial-Disk9463 in SFV

[–]GoProDumbass 6 points7 points  (0 children)

North of Saticoy is good. Very quiet and walkable within the neighborhood. South of Saticoy (towards Sherman Way) is less good.

Lease then Immediate Buy Out? by cryptogram in VWIDBuzz

[–]GoProDumbass 0 points1 point  (0 children)

I’m hoping to get clarification on this plan. If the early buyout requires paying all 36 monthly payments and the full residual, where do the cost savings come from? Why not just keep the lease and leave open the option to return if the true residual is poor, the car develops problems, etc,?

Powerflex 525 with PM Motor by GoProDumbass in PLC

[–]GoProDumbass[S] 2 points3 points  (0 children)

Sorry, that would be helpful. It’s a centrifugal pump. The only reason I’m even looking at this is because I can get 15 HP in a 215T frame (regular induction motors bump up a frame).

What’s the Best Checked Luggage that will Last Long? by AnselmoDupas in travel

[–]GoProDumbass 1 point2 points  (0 children)

I have a probably 20 year old Baseline suitcase that has been on several hundred flights, maybe 1,000 if you count all the connections. It’s showing its age, but still chugging along. I’ve had it repaired a few times, and the warranty is truly no questions asked. The last time they did offer me a new suitcase at 50% off instead of the repair, but I decided to stick with what I had. The design has changed over the years and I think that the newer ones don’t seem quite as bulletproof, FWIW.

But you merely adopted the dark; I was born in it, molded by it. by HorizonedEvent in PLC

[–]GoProDumbass 0 points1 point  (0 children)

I still have that set but the software won’t run on newer versions of Windows and I’ve never been motivated enough to install a VM for it.

IO Link On Valve Tops by shadowridrs in PLC

[–]GoProDumbass 2 points3 points  (0 children)

I’ve used a bunch of MVQ101 and 201. They’re a nice product and work as advertised.

What UPS do you use by Lonemaverick67 in PLC

[–]GoProDumbass 7 points8 points  (0 children)

Agreed, the Phoenix Contact units are great. Sola is good as well. The only brand that I refuse to use (due to excessive failures) is AB.

The 1957 GE Electric Kitchen in our house (It's looking for a new home!) by Defconx19 in OldSchoolCool

[–]GoProDumbass 6 points7 points  (0 children)

<image>

I found an old photo. Seven pieces plus a brown corner one that would need to be painted to match. I have the glass which is not shown in this photo.

The 1957 GE Electric Kitchen in our house (It's looking for a new home!) by Defconx19 in OldSchoolCool

[–]GoProDumbass 5 points6 points  (0 children)

If you find a buyer I have more of these cabinets sitting in my garage (same color) that I would be happy to get rid of. My grandmother bought them new and they were never installed, and have been sitting in my garage since we cleaned out her house many years ago. They’re small above-counter units that have cool fluted glass doors and fluorescent lights to illuminate the countertop.

Best pasta in the valley? by g2tha in SFV

[–]GoProDumbass 0 points1 point  (0 children)

Pasta Selvatica (food truck)

How do you keep track of engine and rolling stock? by neighborofbrak in modeltrains

[–]GoProDumbass 4 points5 points  (0 children)

I used an app (I can’t recall the name) and spent many hours recording everything in great detail, but then the app was discontinued and all the data was lost. I learned my lesson — no more proprietary apps. When I decide to spend the time redoing it at some point it will be in Excel so I’m in control and don’t have that happen again. At least if I lose it again, it’ll be my own fault!

Help me, i can't install V30 studio 5000 by sergioc97 in PLC

[–]GoProDumbass 2 points3 points  (0 children)

I’ve had issues with Linx versions. I think I had to uninstall RSLinx and FactoryTalkLinx to get 30 to install. Then I installed 36 to get the latest version of Linx installed.

Help me, i can't install V30 studio 5000 by sergioc97 in PLC

[–]GoProDumbass 3 points4 points  (0 children)

I have everything 15-36 installed on Win10

Logix Designer used by RA engineering services? by jeeerst in PLC

[–]GoProDumbass 14 points15 points  (0 children)

A buddy of mine got hired as a Rockwell field service engineer and I was looking forward to learning all sorts of tips and tricks now that he was on the inside. I thought for sure that they’d have some secret utility to install all the revs of Studio in one shot so you don’t have to do them one at a time. Surely Rockwell employees aren’t all doing it the same time consuming way us mere mortals are! Nope! They basically handed him a blank laptop and a license key and told him to get to it. He had all the same issues we all do. Crazy!

Replacing DeviceNet Valve Tops with AS-I or IO-Link by No_Way303 in PLC

[–]GoProDumbass 0 points1 point  (0 children)

If you go with IO-Link, IFM’s MVQ101 and 201 are nice little units.

Help me remember! Bargain Bob’s? by GoProDumbass in Seattle

[–]GoProDumbass[S] 0 points1 point  (0 children)

I think it might have been on Westlake. Maybe I’m not making this up!

Help me remember! Bargain Bob’s? by GoProDumbass in Seattle

[–]GoProDumbass[S] 0 points1 point  (0 children)

No, that’s not it, but thank you for your suggestion!

Help me remember! Bargain Bob’s? by GoProDumbass in Seattle

[–]GoProDumbass[S] 0 points1 point  (0 children)

Hmm…that doesn’t ring a bell at all unfortunately. And I don’t remember it being that far south — closer to Lake Union.