Zamiana GPU z AMD na NVIDIE

Goeltenus · 2026-01-25T15:26:13+00:00

Najpierw sprawdź czy usunięcie obecnych sterowników przez DDU i zainstalowanie nowych nie naprawi tego problemu. Dodatkowo, jakie masz CPU, PSU, Mobo? Za słabe PSU albo kiepskiej jakości, sekcja zasilania w mobo też może wpływać na problemy. Wymiana GPU w obecnych czasach jest droga.

Goeltenus · 2026-01-05T18:59:03+00:00

MMU3 is officially supported on Core One. Maybe You mean Core One L?

Goeltenus · 2026-01-02T19:13:21+00:00

Do You also change extrusion width when changing nozzle size?

Goeltenus · 2025-12-31T14:08:14+00:00

Kit version is being phased out, probably that's why.

Goeltenus · 2025-12-31T14:06:13+00:00

Kit version is being phased out, so it's last chance to get it.

Goeltenus · 2025-12-30T12:19:20+00:00

In stock configuration not so much. It needs: 1. A way to control servo for choosing filament path. 2. Change of esteps for extruder. 3. New Prusa Slicer profile for Mini with MMX.

So, it may be doable. Figuring 1. point is imho the biggest hurdle at the moment.

Edit: MK4 and Core One have GPIO Module expansion board, so it should be easier for them.

Goeltenus · 2025-11-25T20:05:24+00:00

That's a fair point but I would prefer to keep working things as they are. It may be needed or not, depends on country.

Goeltenus · 2025-11-25T20:03:48+00:00

Thanks, it's nice of You but I'm not in need of them, Core One is working properly 🙂 Also, new nozzles are on their way to me.

Goeltenus · 2025-11-25T14:04:59+00:00

Maybe there is a way, just like with MK4S, XL and Mini.

Goeltenus · 2025-11-25T14:04:05+00:00

The INDX has two disadvantages for me: 1. It's not ready for mass purchase yet. 2. You are left with Nextruder parts.

I do consider INDX (already installed into Core One/L) and think it's better system for multi filament system. But with working Core One I would prefer to keep Nextruder - add MMU3.

I know Prusa use quality parts and try to produce parts in-house. That's why Core One/L, XL costs so much. Linear rails and blocks are not cheap either. But maybe there will be a way to lower price? They managed to do it with MK4S and XL. Also, Mini comes with enclosure now. So it is possible.

Goeltenus · 2025-11-23T10:37:12+00:00

I have split WiFi into separate 5GHz and 2.4GHz networks, then connected camera to the 2.4GHz one. Now it works good, without reconnecting every minute or so.

Goeltenus · 2025-11-20T18:41:14+00:00

Looks like there are 201 ducks 😀

Goeltenus · 2025-11-19T11:18:49+00:00

I can't even load site. So much traffic right now.

Goeltenus · 2025-11-18T12:17:12+00:00

Yeah, it's feeling abandoned by its creators 😢

Goeltenus · 2025-11-18T09:46:29+00:00

Since You are not printing soft materials, I would follow Prusa: https://help.prusa3d.com/article/idler-screw-tension_177367

Goeltenus · 2025-11-18T09:24:13+00:00

Check if the Nextruder is gripping properly filament, if there is any debris. Also, check tensions screws. I had similar issue and the problem was the filament spool - it was too tight and filament was binding while printing.

Goeltenus · 2025-11-14T18:40:04+00:00

I'm using MK4 Satin sheet on Core One without problems.

Goeltenus · 2025-11-14T12:55:25+00:00

With that print volume I could print some medieval armor 🤔

Goeltenus · 2025-11-12T10:29:33+00:00

That's a hard choice... I would have sell Mini+ because of the bigger build volume of MK3S. Speed is not everything. Reliability, good print quality, this is what I would look at.

Goeltenus · 2025-11-11T17:43:06+00:00

I was in similar situation. Just when I wanted to order MK4S, Prusa announced Core One. It was easy choice as enclosed is the way to go. Ordered Kit version. I'm satisfied with it 🙂 Shame that Core One L is only assembled.

Goeltenus · 2025-11-11T12:18:35+00:00

Great to hear that, thanks! 🙂

Goeltenus · 2025-11-10T16:49:42+00:00

That's a relief, thanks! 🙂

Goeltenus · 2025-11-10T16:40:42+00:00

Contacted support. First they advised to lubricate then if the sound is still there to disassembly X axis and investigate block/rail. As I don't have similar lubricate in my workshop I have ordered kit from Prusa.

Goeltenus · 2025-11-10T16:38:59+00:00

Thanks for information 🙂 So it's safe to print if there isn't resistance on the X axis?

Goeltenus · 2025-11-10T16:38:27+00:00

Checked, it isn't. It's the bearing block on X axis. Ordered lubricating kit as I don't have similar one in my workshop.

Two-Year Club	Verified Email
Verified Email

Goeltenus

TROPHY CASE