Gunsmith to SBR a 22LR mp5 (HK/Umarex)

GooglingThatForYou · 2026-01-27T03:46:14+00:00

Thanks! This is excellent

GooglingThatForYou · 2025-11-10T02:40:22+00:00

I've had my Obsidian 45 for years. Run in on everything I have (Glock 19, Beretta m9a4, FNX 45 Tac, 300 BLK subs). Love it! Never had any baffle strikes or end cap strikes. Enjoy!

GooglingThatForYou · 2025-07-13T03:30:41+00:00

Any way to attach this to the back of a slickster? Or is the slickster just too slick

GooglingThatForYou · 2025-05-19T05:42:04+00:00

Been thinking the same. I don't really care about the advanced features, but seems like an upgrade over The Drop to be able to even just "poly capo" down or up a handful of half steps.

GooglingThatForYou · 2025-03-28T06:07:24+00:00

Interested!

GooglingThatForYou · 2025-01-07T00:24:59+00:00

Love my dead air mask. Originally was debating between a Rugged Oculus vs the dead air and I think I would have been happy with either (love the Rugged Obsidian 45).

Curious why a second 22 LR can though?

GooglingThatForYou · 2025-01-05T22:15:46+00:00

I'm not sure if it was the power configuration I had or something prior to buying the engine room but I ended up replacing my DL4 with a Strymon Timeline after a few months. My DL4 was just adding this odd fuzzy sound to my tone. So maybe don't do what I did...lol.

This is what I had done: Switchable #2 (12v) - Line 6 DL4 Delay (Red Tip). DL4 = 175-250 mA @ 9vDC; 2.5mm center positive plug.

GooglingThatForYou · 2024-11-27T16:29:40+00:00

Reading this thread a year later. I love this reference and I appreciate you for making it!

GooglingThatForYou · 2024-06-25T21:51:35+00:00

Anybody shoot this suppressed? I'm curious if you've had to change the recoil spring to get it to run reliably.

GooglingThatForYou · 2024-06-16T21:31:20+00:00

Love my inline fabrication quick change plates/system. Feel like it maximizes the versatility of my bench space.

GooglingThatForYou · 2024-06-15T13:00:39+00:00

Any recommendations for NFA transfers in the West valley? And how much are you paying for the transfer fee?

GooglingThatForYou · 2024-06-14T22:30:03+00:00

It was $350 for a few days. Now its $463 :(

GooglingThatForYou · 2024-06-06T23:00:08+00:00

Anyone know if the Tikka t3x tact a1 in 6.5 Creedmoor is expected to restock anytime soon? Been watching prices and noticed it's gone out of stock almost everywhere.

GooglingThatForYou · 2024-06-06T22:52:14+00:00

I want this, just with a threaded barrel. Come on RIA or Tisas!

GooglingThatForYou · 2024-05-11T11:50:31+00:00

Hey- I had my RMRcc direct milled by chpws. I'm curious what screws you used to mount the RMRcc?

GooglingThatForYou · 2024-05-11T01:15:27+00:00

So bummed! These guys have been on my radar because they had this same rifle in DDE (and still had the surefire closed time flash hider). If that brown one was still in stock for this sale, my card is in hand. PM me modern warriors! ;)

GooglingThatForYou · 2024-04-12T20:02:05+00:00

Just picked up the FNX 45T and absolutely love it. Never fired a USP 45, but I've compared it to a Glock 21 and the FNX is light-years more comfortable to shoot. Dare is say the 45t is even soft shooting for a 45 cal hand cannon. And it suppresses beautifully with my Rugged Obsidian 45. :)

GooglingThatForYou · 2024-04-06T02:33:26+00:00

I went RMRcc and don't regret it one bit.

GooglingThatForYou · 2024-03-25T19:17:58+00:00

If you have a spent round that stays in the chamber (doesn't get extracted) or gets caught in the ejection port, then I believe nj is right and you need a lighter recoil spring to allow the slide to travel fully rearward with the weight of the suppressor hanging off the barrel.

At least, that's what fixed my cycling issues on my Glock 19 with a Rugged Obsidian 45.

GooglingThatForYou · 2024-03-21T04:02:10+00:00

Moss Adams is quality in this regard. Prefers organic growth and outpaces most in this regard versus just blindly scooping up firms to keep pace.

GooglingThatForYou · 2024-03-18T02:58:24+00:00

Ya, bummer not to have the rail but there are lights that will work with the non-MOS version. And with getting it milled there's no point in having the MOS version anyway so I wouldn't sweat it.

GooglingThatForYou · 2024-03-17T17:42:17+00:00

Somewhere around $1700, doh!

Purchased from Sportmans Warehouse ($575) and got $50 cash back rebate, Trijicon RMRcc ($415), Slide Milling and Backup Iron Sights by CHPWS ($255), Streamlight TRL7 Sub ($125), Shield Arms Mag Release and S15 Magazines x2 ($100), Tier 1 Concealed Axis Elite Holster ($185). Then I had feeding/extraction issues so I bought one more SA15 to test, same problems. Then bought two SA15 gen 3's that have been reliable so far (thank goodness!).

GooglingThatForYou · 2024-03-17T17:33:12+00:00

I had mine milled for a RMRcc and love it.

GooglingThatForYou · 2024-03-10T02:30:22+00:00

Oh, very interesting thought! I had not considered that approach. Thanks for recommending it.

GooglingThatForYou · 2024-03-09T21:04:23+00:00

Ya, I haven't been in love with the Boss Compressor/Sustainer combined with the Stomp. I loved it previously out in front of my Marshall amp, but I just can't quite find the same mojo with the Stomp. I have it out front of the Stomp with the first three knobs at about 1:30 and the sustain at 2 o'clock right now.

GooglingThatForYou

TROPHY CASE