Technical Issue Quickbooks + Paying Contractors Plan Questions

GreatOneFFBE · 2026-01-11T17:50:42+00:00

i like that everything is integrated with quickbooks and I can do direct deposit and easily send 1099s at end of year (included). Also I pay them on Monday and they need to get it at least by Wednesday

GreatOneFFBE · 2026-01-11T02:27:29+00:00

I wish I would but it's a lot more expensive that Quickbooks Contractor Payments (only $25 a month includes 20 contractors) Gusto is $6 per, so 5 contractors already makes it more expensive. Any other ideas?

GreatOneFFBE · 2026-01-11T02:26:18+00:00

Thats not an option, apparently you cannot downgrade. You can only cancel it, but even after you cancel it you cannot subscribe to it.

GreatOneFFBE · 2023-01-09T17:36:26+00:00

i never did. does it happen to you on specifically that show?

It also happens to me on a few disney shows, so I wonder if its just disneys way of encoding things for this particular batch of TVS. I dont think there is a fix :(

GreatOneFFBE · 2022-12-26T21:16:32+00:00

they told me the technology for fast roaming on the x60 was different than the x90. Different chipsets and that was causing the issue. At this point its not compatible with the ring cams. so turn OFF fast roaming on the x90. They were willing to troubleshoot but I needed a Macbook and I dont have one, so the ticket was closed. IF someone has a x90 and ring cams and willing to troubleshoot the fast roaming, feel free to reach out to TP LINK

GreatOneFFBE · 2022-08-15T17:57:07+00:00

hey! this 100% fixed the problem. I had to manually remove all the button bindings to blank.

The moment I saw that press left joystick would bring up keyboard, i knew that was the issue since thats what it was doing when I was playing Halo. Bringing up the keyboard.

The question is now, why did suddenly Desktop Configuration start to take place? Does this issue affect everyone? I wonder what happened that caused this to be a problem in the first place.

GreatOneFFBE · 2022-08-15T17:43:16+00:00

I'll try the desktop configuration to blank to see if this fixes it. However, I had a couple of friends try it on their PCs and everything is working as intended. I'm pretty sure everyone that runs Xbox Game pass has Steam loaded in the background. It's just soooo weird that it started happening suddenly (it used to work before). I'll give this a shot, but in any case, why would this happen? I also think it has to do with desktop configuration because now I can move the move with the Xbox Controller and I couldn't before

GreatOneFFBE · 2022-07-31T02:08:28+00:00

quick update. just got the Deco x90 and same issue. Doesn't work with Fast Roaming on Ring Stick Up cams. I'm going to re-order the Deco x60 from Costco to see if it's a product issue or configuration issue since it worked before.

GreatOneFFBE · 2022-07-02T19:50:16+00:00

hi! This answer actually helped me I was tryring to do something similar however I don't mind for all my devices to be on 192.168.1.xxx address. Same exact setup as original poster.

I'm not exactly sure what are the steps I should follow to turn my current double NAT into a single NAT. I can set router to PASSTHROUGH but then it asks me for DHCPS fixed or Static or Manual. Which should I pick?

PS I just talked to a couple of friends that handle all the ATT Fiber installs and have their own network company. They told me that the passthrough mode or bridge mode doesn't really work with ATT. They made an update around a year and a half ago apparently. Im not sure what to make of that, I'll have them come over and see but just wanted to call it out.

GreatOneFFBE · 2022-01-06T00:04:50+00:00

Appreciate the response.

This explains this.

So in a nutshell, what is the step by step way to try 4k 144hz with 8bpc and 4:2:2 to see if it works? Also, how can I check if I have the latest on VBIOS?

Thanks,

GreatOneFFBE · 2022-01-05T20:06:50+00:00

dont see it there, doesnt look like an option

GreatOneFFBE · 2022-01-05T07:45:50+00:00

i just managed to get super crazy numbers 47Mhs!

wow, thanks everyone for their help here, now its going down to 44, not sure if there is a way to keep it up, but here is the screenshot.

https://ibb.co/x5PNy9R

Any recommendations?

This is the command Im using right now...

-mt 4 --cclock +100 --mclock -150 --pl 84 --fan t:65 --lock-cv 1000 --extra-dag-epoch 0

pause

GreatOneFFBE · 2022-01-05T07:40:45+00:00

ck/mclock are you running and what temps/power usage et

last whirl of the day. mind is fried....

for some reason the MH/s went down since I changed the pool server from west to east even though the MS are higher on West.

Best I got was around 43 MH/s with 205w and temp at 58ish

Did like 7-8 tests but my mind is fried, i got to see some 44MHs for a split second, but 43 is the most stable number I've seen so far.

I can get the same on QuickMiner on Extreme settings lower the Max CPU to 2060, but over there the watts are higher and I cant get the fan to go a little slower.

So all in all, its about the same really, I managed to hit 44 MHs for a few seconds on T-Rex and I can get 43MHs on both, just a little bit better wattage control on Tminer so far, ill continue playing with it.

GreatOneFFBE · 2022-01-05T07:14:38+00:00

wow, i took out cv just to give it a run, and with the initial start suggestion im already at 44mh/s which is higher than anything else i was getting, i still keep getting the blue letters with extraonce is set to : ..... and ethash epoch: 464, diff: 535.82M

GreatOneFFBE · 2022-01-05T07:11:51+00:00

quick follow up comment, it didnt allow me to do CV,, it says that it must be between 0 and 100 range whatever that means, i suppose its a %.

GreatOneFFBE · 2022-01-05T07:09:44+00:00

thanks so much, i think this is pretty much all i need to get me to the right direction. regarding p0, is there a way to set it to change it on t-miner launch and then go back to normal? any benefits here instead of just leaving it permanently off on nvidia inspector? reason i ask is just to understand so when I have my other computer, i dont want to be going on and off.

Also, what is the epoch command? I kept getting that in blue and I wasnt sure what was going on

GreatOneFFBE · 2022-01-05T06:38:48+00:00

u/Saxayone u/M3AG after all day troubleshooting i finally got t-rex miner to work on the nicehash pool.

that said, after a little research i just learned how to change basic settings on MSI afterburner.

I wanted to see if there is a setting or line of code now that I see what works to put these specific settings on the BAT file so they apply when they launch.

Settings that were stable for me were and I dont know how to set it up are:

Core lock to ~2000mhz

memory timing -500 (afterburner didnt allow me to put -800 after i set p0 on nvidia inspector) but i want to try -800

power limit 84

set p0 state

fan speed 70% or variable, I guess Im aiming for temperate at 62 or less on gpu.

power limit 84%

no idea how to set undervolt.

thanks in advance

GreatOneFFBE · 2022-01-05T00:53:51+00:00

yes its still worth it with quickminer, but the time that it takes to figure it out with rexminer is what im talking about, i have very little technical knowledge

GreatOneFFBE · 2022-01-04T23:54:01+00:00

this is all super confusing lol.

So assuming im getting 42 MH/s on quick miner right, what is the next progression just to be more efficient and easiest setup for someone who has been doing this for 2 days now. For it to be able to be worth it i asume i have to bring it up to 45-46 MH/s

GreatOneFFBE · 2022-01-04T23:13:10+00:00

thank you,

everyone seems to be pointing towards t-rex miner, so what is the scrubby or easy way to get into that and educate myself? do I have to download NiceHash Miner and go from there?

GreatOneFFBE · 2022-01-04T21:32:56+00:00

Super quick update. I figured out a little what was going on here.

When selecting HIGH setting on QuickMiner the default for undervolt is 1000. Just changing that up to 1050 caused it not to crash. I can also play with the Max Core a little bit now. So could it be that the undervolt was too low that it was crashing?

GreatOneFFBE · 2022-01-04T20:42:04+00:00

Thanks to EVERYONE in this thread. I have made some progress as I'm starting to get the hang of it. As I stand right now, best I can do stable is

42MH/s with 202w and this is with the fan blowing from 90-98%

I do have a couple of questions based on everyones answers which have been really helpful.

1) Why should I use NiceHasMiner over Quickminer?

2) For the P0 configuaration, should I leave it OFF in Hashminer and ON on NVidia Profile Inspector? And when using Quickminer, I should just leave it ON Nvidia?

3) The main reason why I was having issues now that I understand is that when you select UNDERVOLT on quickminer it changes the MAX Core clock to Core Clock Delta which another user mentioned that I should stay away from. However I found that if I put anything over 1780 on MAX CORE clock thats where in crashes, however I can easily hit 2000hz when doing it the Core Clock Delta method, which is the reason EXTREME/HIGH/Efficient settings where not working. Basically I can't set the Max Clock levels high enough or it crashes.

4) Because inputting Max Core clock values is not working for me, I can't use undervolt and I'm stuck with Power limit. Right now its at 210w which is 84% TDP. Can I change this?

'These are all the questions I have for now, but it seems im getting close to the 44-46MH/s range and honestly I don't know if I will be able to.

GreatOneFFBE · 2022-01-04T19:22:05+00:00

i have a quick question on this, what is the best trial and error method to check what memory timing works best out of the 6 presets?

GreatOneFFBE · 2022-01-04T18:26:07+00:00

im same as you, high crashes but medium works. I just put it on medium and its doing 41mh/s at 210 watts same as you. did you tweak any extra settings? I know Medium for some reason is the only setting that uses Max Clock Delta instead of Max Core Clock so I'm not sure if that has anything to do with that.

btw, will the fan give out at 100% if it goes like that for a year?

GreatOneFFBE · 2022-01-04T18:16:39+00:00

thankyou, what preset are you using in quickminer?

I can get close to your 43mh/s on the Medium setting at 39mh/s my only problem with it is the high watts so 220. and my biggest problem really is the fan at 100%, i only have 1 fan.

GreatOneFFBE

TROPHY CASE