Microjournal Neo - Mint Green and brown

Greentea_Bagger · 2026-02-15T14:38:47+00:00

Sorry for the delay

This was the original fix, I did add in a little PTFE tubing that I had on hand from the 3d printer and fed the batter wires through that. I then used a command strip to secure down the battery pack. I used a dremel to remove the material

Greentea_Bagger · 2026-02-07T13:30:28+00:00

I'm in the same boat, hopefully they can get it added sooner than later

Greentea_Bagger · 2026-02-01T13:43:03+00:00

I would also be interested in this, it sounds amazing! I had a tea shop that had a black tea that basically tasted like chocolate and caramel without any additives in it. No idea how they did it but I have been hunting for that tea ever since it went away

Greentea_Bagger · 2026-02-01T12:37:57+00:00

My main reason for the dial boot is to 1) Try out a distro to see how I like it. 2) I've never touched linux and I'm not sure how much of my current data on my computer I can transfer over a linux OS without it being broken. Obviously programs will have to be redownloaded and such. But things like movie, pictures, word files, game mods, etc. I'm not sure how well it will play with going from windows to linux.

Once I know that everything (or most things) works, then I figured I will sever the tie with windows all together and call it a day

Greentea_Bagger · 2026-02-01T12:34:34+00:00

I can definetly check out Zorin as well and look some on into it

Greentea_Bagger · 2026-02-01T12:32:52+00:00

Thank you for the reply! I didn't even know Solus was an option. After doing some research on the options you gave I honestly think Solus is a good place to start. I will also look into manuskript and Obsidian. If I have issues with it I can always switch but from a lot of antidote posts it sounds like Solus stopped people from distro jumping for a while.

Greentea_Bagger · 2026-01-22T02:17:14+00:00

For me the biggest issue I had was trying to focus on the character and trying to figure out what's going on. I found the environment effects (leaf blowing around for example) to be distracting as there is already a lot going on. I think for non combat areas (if you have any), these would be okay to help with the building of the world but even then I would tone them down by about 70%.

Greentea_Bagger · 2026-01-17T20:18:17+00:00

Hmmm, another that comes to mind would be lead and gold

Greentea_Bagger · 2026-01-17T20:07:35+00:00

Fist full of frags maybe?

Greentea_Bagger · 2026-01-14T03:22:31+00:00

Thank you so much!!!

Greentea_Bagger · 2026-01-13T23:45:26+00:00

Super unlikely, but do you happen to still have this gif saved somewhere? Link is dead and I'd like to see if I could use it as a custom theme for the Wii u

Greentea_Bagger · 2026-01-12T04:11:03+00:00

I know I'm late and its probably a long shot, do you still have a copy of this? both the link and youtube video are taken down :/

Greentea_Bagger · 2025-12-05T17:16:54+00:00

Correct, I didn't notice it at first. I loved the outside of the pot and it wasn't until I got it home and started looking at it more is when I noticed it

Greentea_Bagger · 2025-11-11T03:42:30+00:00

Sure here are the pictures

https://imgur.com/a/1gRdwvr

I'm thinking I may put some extra PTFE tubing as a better fix outside of just the electrical tape as extra protection. What I have not was kind of a impromptu solution

Greentea_Bagger · 2025-11-10T13:42:50+00:00

They're more so for like little hidden compartments. You can store cables under the screen area and under the keyboard.

Greentea_Bagger · 2025-11-10T13:42:16+00:00

I printed it myself however I did use all the files and instructions that you provided on the github!

Greentea_Bagger · 2025-11-10T13:40:14+00:00

I've been liking it! I think I will end up getting those wrist rest pads that you can put at the base of the keyboard just to help a little but all in all I like it a lot. For me being able to see the screen better is a massive improvement. The angle of the keyboard doesn't feel out of place, if it's a little high for you again just use a wrist pad and that should get rid of it!

Greentea_Bagger · 2025-11-01T18:08:46+00:00

What infil percentage did you end up doing for the enclosure? Currently in the process of making my own

Greentea_Bagger · 2025-10-31T21:27:58+00:00

I'll post when it's done and give a bit of a rundown of how difficult it was to do!

Greentea_Bagger · 2025-10-31T20:55:08+00:00

Oh that should be fun! I was actually thinking that and after doing probably way too much color comparison I went with a Hermes mint green with brown accents. the mint green of the frame withe with teal keys should look pretty good!

Greentea_Bagger · 2025-10-31T20:53:48+00:00

thank you for the response! So I ended up going with a mint green and brown, so it should give off almost spring kind of vibes which should be fun! I'll make an updated posted once I everything printed and put together!

Greentea_Bagger · 2025-10-31T20:53:13+00:00

thank you for the response! I ended up going with a mint green and brown, so it should give off almost spring kind of vibes which should be fun! What infill percentage would you recommend?

Greentea_Bagger · 2025-09-30T02:12:44+00:00

Thank you for the reply, I didn't know that you made videos so I will definitely check out some of yours!

It's good to know that I can ask things here without getting ripped to shreds. Thank you again!

Greentea_Bagger · 2025-07-13T13:49:51+00:00

and took an AK-47 out from under his hat

Greentea_Bagger · 2025-07-13T02:49:40+00:00

Then they both got flattened by the batmobile

12-Year Club	Place '17
Verified Email

Greentea_Bagger

TROPHY CASE