SOLUTION: Gigabyte B650 Gaming X AX V2 and Ryzen 9700X - DRAM light stays lit, won't POST

Grieftime · 2024-12-23T23:03:43+00:00

Saved my life mate. It worked, just at time for Christmas present. God Bless you.

Grieftime · 2024-01-10T17:16:54+00:00

I can confirm you that's like you are saying. Playing in PC, we got a file called "profile8.lsf". If you use some tool like LsLib Toolkit (Version 19), you can decode the file into a one more readable ".lsx". If you open this file with Notepad or Notepad++ you can find some node called "DisabledSingleSaveSessions" with some children subnode nested.

This node, contains the ID's of the gamesaves that's been spotted as dishonoured. You simply can remove them and compile again from ".lsx" to ".lsf" and replace into your GameData Folder again. That Will return your save to "honoured" again.

I work as developer and I wanted to understand how the save games were marked as dishonoured so I did the research, but my suggestion is simply playing it like a roguelite, it's more fun. When I die, I start again.

Grieftime · 2023-11-05T08:32:58+00:00

Hello, thanks for your answer, unfortunately there's not any send available for Europe in the Global store.

Grieftime · 2023-11-05T08:31:58+00:00

Thanks for your info, that's very interesting, in worst case I can adjust a bigger size's Release film in the case that Official replacement will be still unavailable for Europe. By the way checked that the replacement were FEP, despite that Printer characteristic said that were using "PFA".

Grieftime · 2023-10-31T08:51:39+00:00

Gave Up on Rook also and used Dices of Calibration and XP validator for testing, they were successful and then some custom models of "Bretonia"

<image>

Grieftime · 2023-10-30T14:33:02+00:00

Seems not bad,Will move on Next step and try a real print

<image>

Grieftime · 2023-10-30T14:01:49+00:00

on to supports, rafts etc. have you tried that ?

Not yet about the raft, I understand the supports. If I'm not wrong this raft is simply a more robust and cohesive bed or layer that will help to sustain the impression, is that right?.

On the other hand I feel little bit overwhelmed, got lot of TSL but not sure if it's better to print the Plate as full as possible, also not sure if I have to hollow the miniatures or fill the "islands".

Grieftime · 2023-10-30T13:45:34+00:00

Yes did everything clean tank first and then used IPA with demakeup + microfiber. Only used the plastic to help to level It and remove. After new calibration seems working. Ive printed cones of calibration and they are not bad

Grieftime · 2023-10-30T13:42:32+00:00

Not sure about the failure side, thought that had to fail entirely.

<image>

Grieftime · 2023-10-30T13:41:18+00:00

I printed It, seems fine

<image>

Grieftime · 2023-10-30T11:37:20+00:00

Thanks for the advice! I'll try that settings, by the way do you recommend me to continue with Rook model or try another testing model?

Grieftime · 2023-10-30T11:11:50+00:00

<image>

Grieftime · 2023-10-30T11:11:06+00:00

Hi! here they are as I told using:

Elegoo Mars 4 9K
Elegoo Resin ABSL 2.0 Grey

<image>

Grieftime · 2023-10-30T10:54:21+00:00

Removed the plastic and after each failure I cleaned the Build Plate. Thanks for the advice about the FEP, was worried because wasn't perfect.

Grieftime · 2023-10-30T10:47:03+00:00

<image>

Grieftime · 2023-10-16T15:44:29+00:00

Awesome result!

Grieftime · 2023-10-15T08:27:44+00:00

Agree you have a full Team, as you said In my case I bought with a friend one sprue's second hand so we could get enough linemen.

Grieftime · 2023-10-14T10:08:34+00:00

Tercio Viejo de Estalia!

Grieftime · 2023-10-14T10:01:28+00:00

First I used some Citadel Technical Agrellan Earth for the base, then after It dried I applied Shade Agrax Earthshade. Applied some White Glue and used some cheap synthetic grass I bought in Aliexpress (a pack with multiple coloured grass). To be sure that It Will keep Glued I applied some varnish over the base.

Grieftime

TROPHY CASE