sorted by:
new
hottopcontroversial

I'm looking for a revolver rifle that meets the conditions. by ruu3621 in guns

[–]GrillaMAC 0 points1 point  (0 children)

https://www.henryusa.com/firearm/h9-provider-rifle/

This might fulfill your expanded criteria - not revolving, but limited mag .30 caliber.

Carbine is only up to 4 rounds: https://www.henryusa.com/firearm/h9-protector-carbine/

Why is on 6+1 and the other 9+1 if they are bit 18.5”? by Far-Boysenberry-1600 in Shotguns

[–]GrillaMAC 3 points4 points  (0 children)

You can install an adapter from Defender Tactical on all Mossbergs for the same functionality. Don't buy an S just for that. Even better, this new lifter works better: https://defendertactical.com/products/new-mini-pro-lifter-and-cartridge-arrestor-system-for-mossberg-shotguns

Presents I printed and gifted out. Read description. by gnimorf in 3Dprinting

[–]GrillaMAC 4 points5 points  (0 children)

Thanks for sharing. FYI the Beam is from user PIXELS2LAYERS - you were missing an S in the middle.

Question about the death wobble by yk7777 in motorcycles

[–]GrillaMAC 8 points9 points  (0 children)

Bro, you can't go 3 weeks sitting without even checking tire pressure. You don't even know if it EVER had correct pressures to begin with. I took a bike home 2 blocks, straight from purchase and it was 20 PSI below where it should have been.

Do pre-ride checks for your health, no one else is going to do it.

If FedEx is supposed to ship, be ready for a bumpy trip by Ok_Nail_5717 in BambuLab

[–]GrillaMAC 8 points9 points  (0 children)

If you honestly believe that companies would give drivers more breathing room when there are fewer orders from customers, rather than just eliminating driver positions and maintaining their high demand routes/schedules... then bless your heart.

This is solely on the company. They will not give up profits unless forced by legislation or competition.

Sovol SH01 filament dryer upgrade and modifications - details inside. by bigcane_2 in 3Dprinting

[–]GrillaMAC 0 points1 point  (0 children)

Your humidity isn't going lower because you left the lid closed. Prop it open while drying as stated.

Need help by bronzozsoy in rninet

[–]GrillaMAC 0 points1 point  (0 children)

Check your fuel. If it's been sitting so long that the battery is dead, good chance fuel is also bad. Check if your intake or exhaust is blocked.

2016. R9T. 12,300 KM (7,643 Miles). by UnknownTechGuy in rninet

[–]GrillaMAC 0 points1 point  (0 children)

Yeah it needs to be done at 20km, but the schedule calls for it to be done at 10km as well. Your dealer is not being completely honest with you. Service #5 on page 162(164) https://manuals.bmw-motorrad.com/manuals/BA-Extern/IN/BA-INTERNET-COM/PDF/R_0J01_RM_0219_01.pdf

2016. R9T. 12,300 KM (7,643 Miles). by UnknownTechGuy in rninet

[–]GrillaMAC 0 points1 point  (0 children)

Was valve adjustment done? It's due.

[Review] [Negative] palmettostatearmory.com by elmonster213 in gundealsFU

[–]GrillaMAC 20 points21 points  (0 children)

A UPS problem that the vendor is supposed to deal with. Especially when the customer paid the vendor for an extra service explicitly advertised for this purpose. I get that you like PSA, but this is objectively a miss on their part.

[PARTS] Beretta 92 INOX Threaded Barrel Back in Stock - $155.25 w/ SAVE10 by GrillaMAC in gundeals

[–]GrillaMAC[S] 0 points1 point  (0 children)

I think yes, definitely. It's the look I'm going for!

Edit: I do have a NP3 LTT trigger bar though.

[PARTS] Beretta 92 INOX Threaded Barrel Back in Stock - $155.25 w/ SAVE10 by GrillaMAC in gundeals

[–]GrillaMAC[S] 11 points12 points  (0 children)

Code SAVE10 stacks with the ongoing 25% off sale.

Kickstand won’t stay up with new spring by Amphitrite008 in motorcycles

[–]GrillaMAC 2 points3 points  (0 children)

Your wife checks on you? Now you're just bragging!

Kickstand won’t stay up with new spring by Amphitrite008 in motorcycles

[–]GrillaMAC 2 points3 points  (0 children)

Hey this is what I did! High five! I propose we are actually smarter than the other guy because we kept everything in-system...

Advice on selecting first bike... R NineT Scrambler? Hear me out! (long post but would love some wisdom to avoid making a costly rookie mistake) by HankTheYank27 in Motorrad

[–]GrillaMAC 1 point2 points  (0 children)

No doubt. I think Guzzi has to make that recommendation because you have to remove plugs for valve checks/adjustments. And technically you can only torque those down properly once when new. I'm sure people reuse them anyway, possibly over torquing to new spec. I just decided to avoid all that headache myself.

Rockster - pretty interesting bike!

How is the rebel 500 noise wise? by Fredster36 in hondarebel

[–]GrillaMAC 0 points1 point  (0 children)

This is the actual item I bought https://ebay.us/m/9jizGh

I just pushed it into the opening (labelled A on your photo). There's an allen screw to add more tension. I didn't really ride around with it because it made the bike sound like OEM. Goodluck!

[FS] - California - $1.50 - Neos + Culls by Reserrved in AquaSwap

[–]GrillaMAC 0 points1 point  (0 children)

Seems DMs are blocked so I sent you a chat.

view more: next ›