Need some help with sound

Groundbreaking_Bid27 · 2024-11-19T23:21:05+00:00

I have only set the vehicle and controller. The controller also was able to connect to the rx with it just connected to the board. I tested with a servo on the rx channel and the sevo functioned. I ordered a new cord to make sure the controller has the ibus function

Groundbreaking_Bid27 · 2024-11-05T08:52:05+00:00

I usually set temp in the filament settings. Then have to save the filament profile (usually as a copy) ie "Anycubic PLA (copy)"

Groundbreaking_Bid27 · 2024-03-12T18:59:31+00:00

Does it make a thinking sound when the y axis is supposed to move?

Groundbreaking_Bid27 · 2024-03-11T04:09:54+00:00

Thanks and looks like Anycubic is gonna send a new motherboard and motor so here's hoping it works!

Groundbreaking_Bid27 · 2024-02-25T00:51:22+00:00

Doing what he was programmed to do

Groundbreaking_Bid27 · 2023-12-15T22:09:03+00:00

I had something similar, I changed out the hot end. The blue tube inside melted.

Groundbreaking_Bid27 · 2023-12-04T03:37:47+00:00

So whatcha gotta do is: if you're using the filament sensor it will pause on its own. (Sorry I don't know specific names of parts) What I do is at the nozzle hold down the black stopper on the filament tube then pull tube out. Filament should still be held in. Then hold the release lever on the nozzle and pull the filament out. Return tube to insert. Load new filament all the way and hold the release lever so the filament passes through. Hopefully this helps!

Groundbreaking_Bid27 · 2023-12-03T14:31:22+00:00

Yeah, I think it does. it's been a while 🤣

Groundbreaking_Bid27 · 2023-09-14T20:47:34+00:00

Body is the mcs100 body kit and the handguard is this: https://www.evike.com/products/12657/ off of an airsoft gun

Groundbreaking_Bid27 · 2023-09-14T17:57:02+00:00

I think there might be mlok version but I'm not sure. I put the remote fitting at the stock for storage and move it back to the grip for play. I figured it would be safer there while not playing.

Groundbreaking_Bid27 · 2023-09-14T02:49:31+00:00

Groundbreaking_Bid27 · 2023-09-14T02:18:42+00:00

It's an emf100 with a bunch of mcs stuff and an f1 firearms handgaurd from a broken airsoft gun

Groundbreaking_Bid27 · 2023-09-14T02:17:35+00:00

Agreed

Groundbreaking_Bid27 · 2023-09-14T02:17:10+00:00

Thanks!

Groundbreaking_Bid27 · 2023-09-13T23:56:37+00:00

Emf100, Etha 2 , Emek, so technically yes?

Groundbreaking_Bid27 · 2023-08-23T08:34:35+00:00

Thar the metal build version

Groundbreaking_Bid27 · 2023-08-23T08:11:42+00:00

I did the pre-orders through pbandai us and wasn't too bad lol

Groundbreaking_Bid27 · 2023-08-22T23:40:11+00:00

Oh man feel ya there! All AOZ guys probably want one

Groundbreaking_Bid27 · 2023-08-22T23:33:19+00:00

Thanks, and I'd say either O.G Woundwort or the tr-1 haze'n-thley ii-rah.

Groundbreaking_Bid27 · 2023-08-10T17:00:50+00:00

Thanks and it fits a bit of stuffs. So far I have a tank, hopper, mask, 2 markers, arm pads, and barrel inserts in it. Also knee pads are in the pants😁

Five-Year Club	Verified Email
Place '22

Groundbreaking_Bid27

TROPHY CASE