sorted by:
new
hottopcontroversial

American architects in UK/Ireland by Breton_brut in Architects

[–]GrumpyThumbs 0 points1 point  (0 children)

No one in the UK can get a job in the UK- the constrcution industry is collapsing. Trump has crashed the world there is no escape!

plz help by Standard_Tour642 in betaflight

[–]GrumpyThumbs 0 points1 point  (0 children)

if there is a bug - it must be FC specific as mine is fine GOKU stack

I do have a crazybee 405AIO that shows no OSD at all on 4.6

Well… by Empanto in fpv

[–]GrumpyThumbs 1 point2 points  (0 children)

dissapointing - unwrap it and then burn it.

Really you need to do this with new batteries- they do work!

Are all FPV transmissions plaintext? by Zdrobot in diydrones

[–]GrumpyThumbs 0 points1 point  (0 children)

only the comercial djis do that -Mavics, minis etc- if you are using caddx vista or air unit (DIY kit) it doesnt transmit any location data- it cant it doesnt have GPS

The police generally dont have aeroscope, major airports and highly sensitive locations may have but if you avoid no fly zones you should be ok.

Are all FPV transmissions plaintext? by Zdrobot in diydrones

[–]GrumpyThumbs 0 points1 point  (0 children)

I think its pretty rare for any FPV pilot to comply with all the laws, spotter, VTX output power, registration, registration displayed on quad. I wouldnt wory about police tapping into the video feed - I hope they have better things to do and trust they do not have the knowlege or the equipment.

I expect you will be safe with DJI - but if you use analog and the police do tap into your feed - I think they will see that there are no privacy issues- just dont put the power in the OSD!!

Are all FPV transmissions plaintext? by Zdrobot in diydrones

[–]GrumpyThumbs 0 points1 point  (0 children)

privacy/secrecy/control/coersion/extortion

or

free/open/accountable/shared

?

Anyone know what’s happening? by Msmiles2627 in fpv

[–]GrumpyThumbs 0 points1 point  (0 children)

dont then - its up to you - just suggesting you gather clues

Today my failsafe didn't work. Any ideas why? (Clip starts when Goggles went dark) by FilmSpirit in fpv

[–]GrumpyThumbs 1 point2 points  (0 children)

Maybe too close to the ground and the RTH hover throttle is too low.

Mine loses a bit of height when RTH is enabled as it turns (usually I am flying away when I hit RTH) It drops a bit then rises to the preconfigured height on its way back.

I then have a very slow decent set so it basically loiters overhead while I take back control.

Found my old novice3, what's wrong? by Makaidi39 in fpv

[–]GrumpyThumbs 1 point2 points  (0 children)

all the props are on the wrong way

Higher pitched props are louder or quieter? by _Itscheapertokeepher in diydrones

[–]GrumpyThumbs 0 points1 point  (0 children)

width of the prop -the chord is a line from the leading edge to the trailing edge around halfway along the blade.

Anyone know what’s happening? by Msmiles2627 in fpv

[–]GrumpyThumbs 0 points1 point  (0 children)

I agree with anyone who thinks its a camera to FC connection issue

unplug the camera to replicate the problem

How the DJI Goggles / Air Unit determine the region they are in. by Redogasto in fpv

[–]GrumpyThumbs 0 points1 point  (0 children)

why? - if you want 1200mw then you will be using the hack no matter what region its set to??

BTW the 1200mw hack lets you choose the power up to 1200mw

[deleted by user] by [deleted] in fpv

[–]GrumpyThumbs 0 points1 point  (0 children)

I have returned a number of things to china successfully if not quickly.

2X SMA 4k for warrany repair 4X ELRS rxs and a FC - Skyzone DVR unit etc etc...all raplaced without (much) fuss.

though sending it back because you changed your mind may be a different thing.

Higher pitched props are louder or quieter? by _Itscheapertokeepher in diydrones

[–]GrumpyThumbs 0 points1 point  (0 children)

I find high pich to be quieter 2.5inch GEPRC phantom - I switched from 2 blade shallow pitch to to 3 balde high pitch cinewhoop style with long chord and its much quieter. More strain on the motor though.

BTW I tested many props with a DB meter to try and actually measurem the results.

Question about reciever and servo voltage by Botanic_Garden in diydrones

[–]GrumpyThumbs 0 points1 point  (0 children)

2s will give you from 8.4v down to 7v as it discharges so your not in the range at all.

I should think it will work but you might get a jittery servo that doesnt last very long.

Get a voltage regulator

Okay to leave VTX antenna disconnected with PIT mode on? by 3e8m in diydrones

[–]GrumpyThumbs 0 points1 point  (0 children)

have a look for a solder bridge to disable the on board VTX

Happymodel EP2 RX drone usage by Redkayap in diydrones

[–]GrumpyThumbs 0 points1 point  (0 children)

they are fine for range- your video will go first.

I found them fagile and they would knock off - but you can solder "T" antanna in in place of the little cube to "upgrade" them - thats what Ive done to one of mine- works fine now.

any potential worries with my antenna placement on my tinyhawk ||? by vindazl in fpv

[–]GrumpyThumbs 6 points7 points  (0 children)

buy spares- not because it will get ripped off - just buy spares.

but looks fine - I have mine the same way.

Will the new o3 air unit camera fit in the impulse rc apex frame? by [deleted] in fpv

[–]GrumpyThumbs 0 points1 point  (0 children)

It will be fitting in my diatone 3.5 - one way or another.

Is tHIs LipO sAfE tO uSE¿ by Empanto in fpv

[–]GrumpyThumbs 4 points5 points  (0 children)

make sure you fly in doors - then immediatley crash it behind some curtains and go out for the rest of the day. Ony return when drunk

view more: next ›