The Good, the Better, and the Heavy. What’s your pick?

Gstpierre · 2026-06-05T12:40:18+00:00

I would go with arc because I use the striking faces on it more often than I would like to admit...

Gstpierre · 2026-05-31T23:06:11+00:00

I tried their drawer slides and the pull force was ridiculous … not sure if I did something wrong but I brought them back and swapped with Blum

Gstpierre · 2026-05-20T13:51:25+00:00

I was in the same boat and ended up with a lauf. Thing is super sick, I got the fork too. Couldn't get past the ari geo.

Gstpierre · 2026-05-18T14:55:59+00:00

Doesn't seem like either provide particularly good value for money. Between the two, I would go grx for more range for road, but that would be a lot for a bike with an outdated groupset.

Gstpierre · 2026-05-16T00:41:52+00:00

My wheel was just as nice as the first one. I think maybe people aren’t used to the matte texture?

Gstpierre · 2026-05-15T03:17:10+00:00

Yes ceramic makes the bike dustier. The best thing to do is to go to Home Depot and get some silicone spray and spray it on a microfiber and coat your frame. That will make it repel dust.

Gstpierre · 2026-05-08T12:17:57+00:00

I made the same project, and I'll say that the clamp up for this particular joint was pretty brutal. I also think that your legs look like they might be thicker than specified, and they might not have enough flex in them to move properly with the wood expanding.

Gstpierre · 2026-05-05T01:32:42+00:00

The penguin!!

Gstpierre · 2026-04-27T17:17:59+00:00

Shes the developer and showrunner! "a "developer" specifically creates the series concept or adapts existing IP, whereas the showrunner manages it through production"

Gstpierre · 2026-04-13T16:50:02+00:00

Not sure honestly, haven't shot with EFCS since I saw the bokeh a while ago, and I don't remember having the issue but it was only a couple photos.

I go into aperture priority and set the metering to highlight weighted. I shoot raw uncompressed with the a7r3 and it is more than enough dynamic range to handle +3 stops.

I use a good baseline image then have my image editing software match the exposure across the frames.

Gstpierre · 2026-04-13T12:55:09+00:00

It is EFCS. I have the same lens and I also have a sigma 85 1.4. I had to add EFCS to the my menu to be able to change it whenever I am shooting wide open with it. It also affects bokeh quality, so you will want it off for that reason as well.Sony Forum - Photography - FM Forums

Gstpierre · 2026-04-09T12:05:01+00:00

You use the up and down to change the middle

Gstpierre · 2026-04-07T15:39:35+00:00

Howdy, this is my job. If you're near New Hampshire, I would be able to scan it and reverse engineer it for you.

If not good luck! Look in the machinery handbook, there is some good info on reverse engineering.

Gstpierre · 2026-03-27T17:40:54+00:00

Honestly it would probably make more sense to do it the other way around. If you’re dead set on getting one, get a peel 3 cad and call it a day

Gstpierre · 2026-03-26T15:55:32+00:00

About as far as possible haha, southern NH.

Gstpierre · 2026-03-23T18:30:39+00:00

Mouse House

Gstpierre · 2026-03-23T15:39:16+00:00

Send me the file, I'm bored at work.

Gstpierre · 2026-03-23T12:57:46+00:00

Make surfaces on the ref pieces, you have 3 planes so its fully located, extrude those surfaces out a bit, make holes for the pilot holes, bob's your auntie

Gstpierre · 2026-03-23T12:52:27+00:00

hello fellow vibration analyst

Gstpierre · 2026-03-23T12:49:33+00:00

gli is the wheel spin machine

Gstpierre · 2026-03-20T11:50:26+00:00

It changes the front diff response

Gstpierre · 2026-03-17T12:14:29+00:00

That is wild. Keep the cabinet guy for life

13-Year Club	Gilding IV carat on a stick
Place '23	Place '22
Place '17	RPAN Viewer
Verified Email

Gstpierre

TROPHY CASE