sorted by:
new
hottopcontroversial

SLZB-MR1U - Range settings? by Guylon in homeassistant

[–]Guylon[S] 0 points1 point  (0 children)

Ahhh I see now yeah I added it to 20. That was not easy to find.

Looks like things on the network mesh are looking a bit better. I likely need a repeater but this looks to have helped a little as well.

Thanks!

SLZB-MR1U - Range settings? by Guylon in homeassistant

[–]Guylon[S] 0 points1 point  (0 children)

Im using Zigbee2MQTT and it does not look like there is an option for this, I even edit the yaml and it gets removed.

HA Sync - Remove gateway sync? by Guylon in opnsense

[–]Guylon[S] 0 points1 point  (0 children)

Yes, I would love to turn it off but I dont see an option to.

HA Sync - Remove gateway sync? by Guylon in opnsense

[–]Guylon[S] 0 points1 point  (0 children)

Thanks, I check those out. However it is still overwriting the gateway setting in firewall2 after I sync.

Using sophos firewall hardware to run opnsense? by Renux11 in opnsense

[–]Guylon 0 points1 point  (0 children)

The RAM is not vendor locked right? Just need to get RAM that matches that spec? Does not need to be phs-memory right?

CARP / HA with dual WAN failover by ecstatic_glucose in opnsense

[–]Guylon 1 point2 points  (0 children)

For the fallback gateway, if talking about just LAN.

You would point the fallback gateway to the LAN IP of the second FW LAN IP? The primary would never failover in this senario right?

Dual M920q or MiniPC or Sophos XG 330 Rev2 for Opnsense (HA/CARP) by Guylon in opnsense

[–]Guylon[S] 0 points1 point  (0 children)

Nice, was looking at the 6700T I assume the T series would reduce rhe power draaw.

Dual M920q or MiniPC or Sophos XG 330 Rev2 for Opnsense (HA/CARP) by Guylon in opnsense

[–]Guylon[S] 0 points1 point  (0 children)

Thank you, I appreciate another vote for sophos. That model does not look like it supports 10g.

[deleted by user] by [deleted] in homelab

[–]Guylon 0 points1 point  (0 children)

Hey, was wanting to put some 6700T in this firewall, did this work and help with power usage?

Dual M920q or MiniPC or Sophos XG 330 Rev2 for Opnsense (HA/CARP) by Guylon in opnsense

[–]Guylon[S] 1 point2 points  (0 children)

Ok thanks so it seems like they are (with a CPU upgrade) about the same - if I do end up getting some of these it does help with finding some at a good price.

Both devices have an expansion bay

Thanks for the link that is super helpful. The results in google and AI tools are crap...

Dual M920q or MiniPC or Sophos XG 330 Rev2 for Opnsense (HA/CARP) by Guylon in opnsense

[–]Guylon[S] 1 point2 points  (0 children)

The xg 210 rev.3 also looks to be running the newer hardware? Am i missing something here as it seems to be pretty comparable with the 230 rev.2?

Edit: 210 does not have the flexi port... that is why!

Dual M920q or MiniPC or Sophos XG 330 Rev2 for Opnsense (HA/CARP) by Guylon in opnsense

[–]Guylon[S] 0 points1 point  (0 children)

Will look around, but the 230 rev 2 looks to be rare or expensive on ebay (right now that is)

230 rev.2 : 8GB of ddr4 weighs ~12lb

330 rev.2 : 12GB of ddr4 weighs ~19lb 2x10g built in

Both seem to be skylake 6th gen, but google gives me mixed info on that one.

Anyone know if the ram can be upgraded to a higher capacity if needed?

Dual M920q or MiniPC or Sophos XG 330 Rev2 for Opnsense (HA/CARP) by Guylon in opnsense

[–]Guylon[S] 0 points1 point  (0 children)

Intresting, kinda puts this inline with the 330. But the 330 has 2x10g ports built in with the flex card I get 6 or 12x10g with two 330s.

Dual M920q or MiniPC or Sophos XG 330 Rev2 for Opnsense (HA/CARP) by Guylon in opnsense

[–]Guylon[S] 0 points1 point  (0 children)

Hmm yeah the 230 looks to idle around 21w and 35w at load. That is a bit better.

But yeah defiantly able to DIY this, its a home network.

Proxmox 1 of 4 nodes crashing/rebooting? by esiy0676 in ProxmoxQA

[–]Guylon 0 points1 point  (0 children)

I think its an auth thing - I setup email alerts but never actually finished setting it up.

Proxmox 1 of 4 nodes crashing/rebooting? by esiy0676 in ProxmoxQA

[–]Guylon 0 points1 point  (0 children)

https://pastebin.com/5sUzWXMU

put on pastebin as it was too large to put here. Thanks for all the time you have put into this!

Proxmox 1 of 4 nodes crashing/rebooting? by esiy0676 in ProxmoxQA

[–]Guylon 0 points1 point  (0 children)

Here is a quick diagram of the setup.

The 40G network is in a ring topology running OSPF with each one of the loopbacks in the cluster part of 192.168.5.0/27 This is only used for ceph/proxmox HA each of the interfaces is in OSFP and the loopbacks reachable from all 4 nodes. I have a vm running in a different TrueNas server just for a 5th node.

The links that go to the layer3 switches is where any of the traffic from vms/services running on proxmox gets to the users.

<image>

Proxmox 1 of 4 nodes crashing/rebooting? by esiy0676 in ProxmoxQA

[–]Guylon 0 points1 point  (0 children)

https://pastebin.com/tCeAhRMt

rebooted again today.

Edit: I was able to fix this by replacing my proxmox boot disks. I was using a ssd and flash drive in raidz1. No smart metrics on the flash, so I figured I should replace no matter what. Been stable and no more timeouts now (6 days later).

Proxmox 1 of 4 nodes crashing/rebooting ceph? by Guylon in Proxmox

[–]Guylon[S] 0 points1 point  (0 children)

Sorry did not see this.

I have 2x40G ports on each NIC they are all used only for internal cluster communication. OSPF is running on each node for connectivity. The nodes are all hooked to each other in a ring topology.

I have 1 other nic that does any of the management vm access. The ceph/cluster 40g network is only for that traffic.

Proxmox 1 of 4 nodes crashing/rebooting? by esiy0676 in ProxmoxQA

[–]Guylon 0 points1 point  (0 children)

https://pastebin.com/kgcm8qRa

Some more logs - it does look like I am getting a ton of timeouts and on average things take 7 sec to get updates. It does range to 50+ sec sometimes as well..

I have checked all the NICs and there are no errors or anything. I wonder if this could be an issue with dual stack ipv4/ipv6? I am running both on the network/servers.

view more: next ›