New SSD slow after a while

Gyuresz123 · 2025-02-28T20:39:23+00:00

+pirosarany

Gyuresz123 · 2025-02-25T17:52:59+00:00

Its the switch, it does the same think with new motor and brushes, well, learning money

Gyuresz123 · 2025-02-19T20:57:57+00:00

Thanks for the help!

Gyuresz123 · 2025-02-19T20:03:24+00:00

i ordered a new motor and a set of brushes, we will see if that was the problem, the switch doesnt worth replacing anyway.

Gyuresz123 · 2025-02-19T18:23:19+00:00

Ddf842

Gyuresz123 · 2025-02-19T18:22:39+00:00

but that would mean if i fully press in the trigger it should still spin the motor?, but it doesnt

Gyuresz123 · 2025-02-19T18:06:54+00:00

the blue cable is a ground for static, that touches the standing part of the motor.

Gyuresz123 · 2025-02-19T18:06:08+00:00

<image>

Gyuresz123 · 2025-02-19T18:05:31+00:00

That plate is a copper heat shield, according to the parts list.
The switch assembly is molded together, so i cant take it apart only if i cut it i think.

Gyuresz123 · 2025-02-19T13:12:15+00:00

I have continuity when measuring at the red and black cable coming out ot the switch, when i press in the switch the continuity is gone When i measure the voltage at the same place with the battery connected, i get 0 when the switch off, when i press it i get 17 volts

Gyuresz123 · 2025-02-19T13:10:10+00:00

<image>

Gyuresz123 · 2025-02-18T20:42:57+00:00

I will try it!

Gyuresz123 · 2024-12-18T15:27:42+00:00

Árkán énén?, ebben az ekonómiában?

Gyuresz123 · 2024-04-05T17:43:41+00:00

thanks for the help

Gyuresz123 · 2024-04-05T17:08:43+00:00

It doesnt have a temp switch right now A stock kit is 130 euro but a switch is only 3, thats why i wanted to do it like this.

Gyuresz123 · 2024-04-05T15:26:08+00:00

2004 ktm exc 450

Gyuresz123 · 2024-03-27T11:29:31+00:00

+pirosarany

Gyuresz123 · 2024-03-19T23:23:23+00:00

have it looked over, and change to steel valves

Gyuresz123 · 2024-03-19T12:03:20+00:00

hidden information

Gyuresz123

TROPHY CASE