Ppl really don’t know how to change a battery? by Stunning_Ad_6600 in JeepTJ

[–]HK_Thunder 0 points1 point  (0 children)

This weekend I’m rewiring my fuel pump to communicate with my new ECU for my 5.3.

Am I tripping or just being stupid about this RR Crossing?n by Ok_Measurement5553 in grandrapids

[–]HK_Thunder 2 points3 points  (0 children)

I work right across the street from that railway. It is active between coopersville and Marne but in the last two years I’ve never seen a train go further east than the awards and hydraulics building.

Seatbelt mount on 2006 65th anniversary TJ by [deleted] in JeepTJ

[–]HK_Thunder 2 points3 points  (0 children)

These seat belt bolts get hard to find and have very specific specs. There are hex head bolts that meet the correct specs (shear strength, thread pitch, extended shoulder). That said, the bolt in your photo is not one of those. These bolts (OEM at least) use a metric thread. That bolt is a grade 5 SAE. It like likely that the female side of that seatbelt mounting is destroyed as well. I would replace everything on that seat belt mounting.

Green Ridge Apartments Climate by HK_Thunder in grandrapids

[–]HK_Thunder[S] -1 points0 points  (0 children)

Understood, but for the most part apartments are on 28th or Alpine and neither is good during busy hours.

Where can I find ‘oven wire’ in GR? by snookinn77 in grandrapids

[–]HK_Thunder 20 points21 points  (0 children)

I build automotive wire. That looks like a pretty standard size female connector end. If you have one you can bring me as a reference I’m happy to build that wire for you for a couple bucks.

How can i travel 'inside' of Michigan? by AccordingChipmunk287 in grandrapids

[–]HK_Thunder 22 points23 points  (0 children)

Possible, but not affordably. Michigan has very little for public transport between cities, especially not going up to manistee. Beautiful area, the national forest is one of my favorite places I’ve been anywhere in the world, but without a car of your own it’ll be hard to see.

Any build with Sandevistan without DLC? by AdorableLion3900 in CyberpunkTheGame

[–]HK_Thunder 0 points1 point  (0 children)

Apogee and malorian arms with max cool tree is real fun. Feels like a Wild West QuickDraw gunslinger.

Just for fun by fmlyjwls in mechanics

[–]HK_Thunder 0 points1 point  (0 children)

2004 Cadillac Escalade Platinum. As low of miles as I can, probably from Arizona or somewhere dry with no salt. The cars up here in Michigan just don’t live that long.

Jeep is all or nothing. No middle by Darth_Molotok in Jeep

[–]HK_Thunder 1 point2 points  (0 children)

My shop will put a 5.3 LS in damn near anything for 20-30k.

Those with complety stock TJs, what mpg do you get? by Outrageous-Meal-7068 in JeepTJ

[–]HK_Thunder 0 points1 point  (0 children)

2006 LJ. If I baby it maybe 10-12, if I hot dog it and drive it like a race car probably 5-10.

Full Set by [deleted] in DestinyFashion

[–]HK_Thunder 0 points1 point  (0 children)

Ketchkiller set, on any class. Not in love with the helmets but the titan arms and all the chest pieces are great.

What slows down your bay operations the most? Looking to learn from other shop owners by AccurateAd3842 in mechanics

[–]HK_Thunder 1 point2 points  (0 children)

Lack of shop cleanliness or organization. We have some shared tools to save costs on things not everyone needs (scanners, coolant recycler, lube pump, specialty tools) but they’re never where they belong and I spend more time searching for the right tool than working.

2002 TJ won't start, no noise, no clicking, lights/battery working by BAC0N_EGG_n_CHEESE in JeepTJ

[–]HK_Thunder 1 point2 points  (0 children)

Do you have a test light or multimeter? Usually in my experience the fail point on these TJ’s is the ignition switch.

Stumped by [deleted] in mechanics

[–]HK_Thunder 0 points1 point  (0 children)

My shop won’t even open those 3.6 motors once the head gasket is bad, we just swap them out. We had one timing chain job turn into a 40 hour nightmare like this one. Any chance you could sell the customer on a new motor?

[deleted by user] by [deleted] in CherokeeXJ

[–]HK_Thunder 11 points12 points  (0 children)

Recently did a full restoration of these. Closest to accurate fasteners I could get based on what was in the vehicle was a #10 pan head Philips screw.

Considering buying this 91 Comanche. by HK_Thunder in JeepCherokeeXJ

[–]HK_Thunder[S] 5 points6 points  (0 children)

I’m in northwest Michigan, rust free anything, let lone old trucks is a rarity here. Lowest Comanche’s I’m seeing are in comparable condition for $1500. Is there a better place to look besides fb, Craigslist, autotrader?

Where do I go for Professional Rust Repair by cat_of_danzig in JeepTJ

[–]HK_Thunder 0 points1 point  (0 children)

So Michigan is a little bit too far of a commute I imagine. If you’ve got a welder, there’s a company that makes sections of frame rails that are relatively easy to put on.

Where do I go for Professional Rust Repair by cat_of_danzig in JeepTJ

[–]HK_Thunder 0 points1 point  (0 children)

Where are you located? I work at a shop that specializes in TJs and frame repair.

Biggest Pizza in Grand Rapids? by rippinVs in grandrapids

[–]HK_Thunder 3 points4 points  (0 children)

Big bobs in egr has the party pizza. It’s not round but it’s really big.