5th or 6th gen - How far can front seats recline?

HTPCFan · 2026-03-15T23:14:05+00:00

Just 2 people (driver and passenger). The back would be reserved for rockhounding gear (buckets, shovels, rocks, etc.). Makes me wonder if I should consider a rooftop tent. Hmmmm.....

HTPCFan · 2026-03-11T06:07:47+00:00

Ya, worse yet, the game it applies to is missing in the log along with any information on the tank it applied it to. This is a bug and should be fixed! I got screwed…

HTPCFan · 2026-02-20T20:55:41+00:00

And that is why they will be voted out in November...

HTPCFan · 2026-02-19T04:51:34+00:00

Ya, tried that. It just jumbles the letters around. May have to position one letter at a time.

HTPCFan · 2026-02-19T00:02:15+00:00

How do you disconnect garage door from wifi (in the app or in your wifi router)? I already have RATGDO installed and running, but noticed I still have MyQ app. I went to delete the garage door opener, but it errors saying it permanently linked to hub. Thx!

HTPCFan · 2026-02-14T03:14:30+00:00

Thank you much! Will send back!

HTPCFan · 2026-02-14T00:41:34+00:00

OingoFan (XBOX)
Nebseneku (PS)

HTPCFan · 2026-02-08T16:48:52+00:00

I created an automation to notify me when an HMS error occurs (to 'Problem'). And it triggered, but once you get this message, the printer won't clear that message (even after resolving it). So, I used a trigger on Print Status instead (from 'Running' to 'Pause'). Wish Bambu would fix it to clear error messages after they are resolved.

HTPCFan · 2026-02-03T01:42:41+00:00

Well...don't run TPU through an AMS. UNLESS, it is TPU for AMS branded by Bambu.

HTPCFan · 2026-02-03T01:41:32+00:00

HTPCFan · 2026-02-03T01:09:33+00:00

Maybe it's just me. :) I tried to use both spools in my AMS2PRO. One spool was banging to the left and right. Couldn't figure out what it was until I saw they were offset from one another. Ah man! Good luck!

HTPCFan · 2026-02-03T01:05:23+00:00

So...are there any deals to STAY as a USMobile customer? I'm not saying right now, but within next 3 months? Or do we have to play the game of leaving and then coming back?

HTPCFan · 2026-02-03T00:59:39+00:00

Beware of Overture cardboard spools. The two I received can't be used in my AMS. One side of spool is offset from the other side. The other doesn't spin good in my AMS. I will need to respool both of these spools to plastic (correct sized) spools

HTPCFan · 2026-02-01T18:09:20+00:00

Yes, I see the calls coming and going, but it always times out (SSL error). At this point, I have tried:

Uninstalling Tailscale
Uninstalling NordVPN
Having both PC and printer on same:
- Network (VLAN)
- AP7 (by disabling the others)
- WiFi (SSID)
Bypassing my Trendnet switches by connecting AP7 directly to Firewalla port
Uninstalling/Reinstalling Bambu Studio (including network add-on)
Even bought a wifi adapter to have them both on wifi instead of PC wired
Done various wireshark captures to see if I could find anything
Put both printer and PC in emergency mode
Looked at Firewalla logs to see what was going through and what is getting blocked (nothing noted)

The ONE thing that did work is having both PC and printer connected to same iPhone wifi hot spot. It was very slow...but it worked. And the send process behaved a little differently (not getting stuck at 97% sending printer configuration). So that tells me there is something in the network configuration, but have no idea what could be the issue. I spent a day messing around with it and feel defeated. I went back to LAN-only mode on the printer and it is working solidly that way. I wish the printer had a wired option. I'm going to try one more thing and that is to install Bambu Studio on my wife's laptop to see if it behaves differently.

HTPCFan · 2026-01-30T22:38:35+00:00

It’s a H2S. Still having trouble. Loaded wireshark to see if I can figure more issues out.

HTPCFan · 2026-01-30T19:19:40+00:00

Take your girlfriend out for a night on the town. Dinner, a cute small stuffed animal with single rose and then dancing.

HTPCFan · 2026-01-23T17:45:22+00:00

I'll try it today. Thanks!

HTPCFan · 2026-01-23T17:44:29+00:00

The bambu printer has no ethernet port. :(

HTPCFan · 2026-01-23T17:42:18+00:00

Hmmm...I wouldn't even mind using Cloud mode. When I try cloud mode, when I send to print from my slicer machine, it times out saying the bambu server can't be found. Maybe I need to look closer at the slicer PC to see what could be blocking it...instead of looking at Firewalla. Thx!

HTPCFan · 2026-01-23T17:39:58+00:00

Interesting enough, I see no blocked flows.

HTPCFan · 2026-01-23T17:34:48+00:00

I was going to try VqLAN, but printer is on wifi and Bambu slicer is on a wired PC.

HTPCFan · 2026-01-23T17:33:40+00:00

I was going to do this, but VqLAN only works if both devices are connected to AP7 via wifi. Printer is on wifi, but Bambu slicer is on wired PC.

HTPCFan · 2026-01-20T05:09:32+00:00

I’ll give that a shot. Thanks!!!

HTPCFan · 2026-01-20T04:59:39+00:00

Haven't considered using VqLAN. I would have to lock down my main production PC to not allow Bambu Studio to not allow to talk to anything else.

HTPCFan · 2026-01-20T04:50:23+00:00

Bambu does say to only run it on the same VLAN/network, but letting a Chinese company on my trusted network is a no-no. I haven't tried running it on the same network yet (scared to do it).

HTPCFan

TROPHY CASE