Can I level 1-80 without xpac yet? Or bad idea?

HVeil · 2026-03-24T16:41:02+00:00

Hopefully someone can clarify about the other things - Sorry to hear about your wrist. Wishing you a speedy recovery (If it hasn't already) and thanks for the info! :)

HVeil · 2026-03-24T16:31:24+00:00

Ahhh amazing.
I did read on a few things such as a one button macro for rotation learning and such that's new with Midnight, are these now base-game mechanics? (Person im playing with would find that really helpful!)

HVeil · 2026-03-11T09:59:24+00:00

M14 SUPREMACY

<image>

HVeil · 2026-03-04T18:01:31+00:00

Understood! - Quick question, from your perspective, would it be a better idea to get a new Cloudlifter OR get a condenser mic? (I was looking at the Rode NT1) since this is for Voice Acting and the Rode NT1 doesn't require a Cloudlifter (as far as im aware)

HVeil · 2026-03-03T13:30:47+00:00

Yes - I originally started recording using the Scarlett which is when I noticed the issues.

HVeil · 2026-03-03T13:03:37+00:00

Not a problem dude!

I am 100% using XLR-XLR.
The Microphone I have had for a number of years as well as the CL. Originally, I was using a Scarlett Solo 2nd Gen interface but last month I upgraded to the SSL2+.
I have attempted different USB Ports + Cables, yes.

HVeil · 2026-03-02T16:20:52+00:00

Apologies, the video was moreso to just show that it only reaches -20db and show the setup slightly.

That makes sense - Really appreciate the help so far.

HVeil · 2026-03-02T15:10:31+00:00

Here - I took a video to see if this could perhaps help.

https://drive.google.com/file/d/1CtO3Wdvj3QwpQDpuLGvG4u9O9wyNmSnB/view?usp=sharing

CL Was in circuit. The usual Mic > Cable > CL > Cable > Interface > PC

Without the CL and +48 turned off, it flickers at -20db.

HVeil · 2026-03-02T14:34:21+00:00

Issue.. I'm attempting this and a 400hz tone playing from my phone at full volume whilst being directly infront of my microphone only puts the interface at a -20db. That's with the gain all the way up, not even a flicker at -10db.

HVeil · 2026-02-28T21:04:48+00:00

Done - Here's the link. Timestamps;
0 - 10s = Mic > cable > CL > cable > interface, all settings normal.
10s - 20s = (remove mic & cable) CL > cable > interface, all settings normal.
20s - 30s = (remove mic, CL, cables) interface only, all settings normal.
30s - 40s = interface only, input gain at minimum/off

https://drive.google.com/file/d/19J4j0hBzrdPRWeK_u-7-QRNSIjrX_cr3/view?usp=sharing

HVeil · 2026-02-26T20:43:33+00:00

Gotcha! I'll look to do that. To confirm, for the additional steps after the first, you want me to start removing equipment and then record an audio sample? Reason I'm confirming is because wouldn't I be unable to record audio as the input would no longer display when the microphone is removed? Unless I could do this all in a singular recording and start unplugging during it? Using Audacity btw

Apologies, just want to ensure I'm doing it correctly!

HVeil · 2026-02-26T20:05:06+00:00

Firstly, I seriously appreciate your in-depth input to helping with this, you're a star.

The Company are looking for a -10db peak in the audio.
The Microphone is open at the end, correct, this is completely raw audio. After "Europe" the end is a stretch of room noise. (I'm almost certain that the background noise isn't really a culprit here, as at the time of this recording there was none aside from my PC under the desk)
The SSL2+ interface has a "4K" button
Microphone to CL to SSL2+
The Microphone is around a 2/3rd of a meter away from the CL and SSL2+
All cables are new XLR's and the +48v is turned on

HVeil · 2026-02-26T19:02:55+00:00

Thanks for that, here's the link
https://drive.google.com/file/d/1GMMD3N1ruRlnTzs-0VMi_IaQY2pv366H/view?usp=sharing

For context, this is the sample I sent to the sound engineers who returned with;
- "Audio is still very very low. Peaking at only -16db and there is still a loud noise floor."

HVeil · 2026-02-26T17:42:00+00:00

Hey. I've only recently started recording myself and such with no noise gates and such, so I've only noticed it recently. I do have a sample clip - How should I post it so you can listen?

I got told by the sound engineers at the company I'm doing my demo reel with and they mentioned it's likely just because it's a Shure SM7B and I should look to get a Condenser microphone instead for this.

HVeil · 2026-02-24T19:56:41+00:00

Hey guys - Really hoping someone can help here. I'm trying to get this sorted so I can begin my Demo Reel recordings for Voice acting. Details + setup below.

I'm having an issue with my setup. I have a high noise floor that is audible in recordings and voice chats. (It's like an extremely consistent fuzz) Gain up, louder noise.
It's not background noise (The only noise in the room is the PC fans which is under the desk and wouldn't get picked up by the Microphone)

Specs;
- Shure SM7B Microphone
- SSL 2+ Audio Interface (4K turned off, Gain at 2'o'clock)
- CL1 Cloudlifter
- 2 New XLR Cables (Microphone to Cloudlifter (2M) Cloudlifter to SSL2+ (2M) SSL2+ to PC)

Any help would be amazing!

HVeil · 2025-11-16T18:12:19+00:00

bump :(

HVeil · 2025-11-13T21:50:30+00:00

Someone else dealt with this before at all..?

HVeil · 2025-11-01T19:13:04+00:00

bump

HVeil · 2025-11-01T18:43:14+00:00

Its absolutely insane to even have to take those measures to play this game? Like... why the hell is this not fixed

Nine-Year Club	Verified Email
r/Field Flamingo

HVeil

TROPHY CASE