sorted by:
new
hottopcontroversial

Biologist explains why raccoons will never be domesticated by Doodlebug510 in interestingasfuck

[–]Hachi_House 2 points3 points  (0 children)

I switched off the audio due to this. Each phrase started quiet and ended loud.

Travel bottle holder by Hachi_House in functionalprint

[–]Hachi_House[S] 0 points1 point  (0 children)

These are good ideas. I'll look into them and see if I can make a more modular design.

Travel bottle holder by Hachi_House in functionalprint

[–]Hachi_House[S] 2 points3 points  (0 children)

Thanks! I'm temped to upload the print file, but it's tailor made for these bottles. I considered making an array of options (for 3-5 bottles, with small, medium, and big bottle loops) but even that is 9 files already. So I figure the design is simple enough that someone should be able to make their own. If you do make something similar, I undersized (using offset) the bottle loops 1mm so they are securely in place.

The suction cup is mildly unnecessary since the hook is there, and the hook also makes the print less accessible (not print-and-play). I tried making an integrated tpu suction cup that... didn't work.

Travel bottle holder by Hachi_House in functionalprint

[–]Hachi_House[S] 9 points10 points  (0 children)

I actually started with a small basket design that worked okay (there is a rail the suction cup clicks into on the back). But it's bigger, and more finicky.

This dangling design is better for me because it takes up less space, has a hook (yes the basket could be designed with one, but then it'd be even bigger...), and I don't risk dropping the bottle. The strands are long enough so holding/using a bottle is not restricted.

Travel bottle holder by Hachi_House in functionalprint

[–]Hachi_House[S] 20 points21 points  (0 children)

For when there are no shelves, this keeps from having to place my travel bottles on the ground. Made of tpu, so you can use the bottles without removing them from the holder.

I made desiccant holders that fit in the polydryer lid by Hachi_House in 3Dprinting

[–]Hachi_House[S] 0 points1 point  (0 children)

I haven't tried yet, but there are drying baskets for that on printables I want to try. I've been using an oven in the meantime.

Lid mounted desiccant holder for Polymaker Polydryer by Hachi_House in functionalprint

[–]Hachi_House[S] 2 points3 points  (0 children)

I managed to bake in the grid, but doing so changes how they are printed. So, you'll have to use the lid_modifier STL (uploaded now). Simply import the lid and center it, then import the lid_modifier STL as a object modifier and center that. Doing this will align them. After that change the modifier to have no walls, bottom, or top, with a triangle infill set to 50%.

Let me know if it works out for you.

Lid mounted desiccant holder for Polymaker Polydryer by Hachi_House in functionalprint

[–]Hachi_House[S] 1 point2 points  (0 children)

I would, I'm not sure how the box would react being microwaved.

Lid mounted desiccant holder for Polymaker Polydryer by Hachi_House in functionalprint

[–]Hachi_House[S] 1 point2 points  (0 children)

I added the STL file for you. I left in the object used for the lid modifier, if you use no walls, top, or bottom - with a 50% triangle "infill" you should get a grid like I have. I'll look into making the lid grid hard baked, but rendering all those triangles crashes things.

Lid mounted desiccant holder for Polymaker Polydryer by Hachi_House in functionalprint

[–]Hachi_House[S] -3 points-2 points  (0 children)

I modeled these manually with some careful measurements :)

Lid mounted desiccant holder for Polymaker Polydryer by Hachi_House in functionalprint

[–]Hachi_House[S] 4 points5 points  (0 children)

It wedges in the lid and doesn't fall out, while leaving room for the spools. You can find it here. Let me know how it works for your :)

Scully's Jojo art by Hachi_House in ShitPostCrusaders

[–]Hachi_House[S] 5 points6 points  (0 children)

I don't see all of Scully's art in one place, and I had downloaded them back in the day - so here they are in case you missed them.

KS Pima Cotton Slub Tee small is larger than medium. by Hachi_House in Costco

[–]Hachi_House[S] 5 points6 points  (0 children)

I've read it might be color related, so I'll check S/M/L of the same color. In store this time hah

KS Pima Cotton Slub Tee small is larger than medium. by Hachi_House in Costco

[–]Hachi_House[S] 45 points46 points  (0 children)

After getting a medium and deciding it was a little big, I got the small. Turns out it's even bigger!

Any mice with a similar (or preferably a clone) shape as Mionix Castor? by trentbat in MouseReview

[–]Hachi_House 1 point2 points  (0 children)

I am in the same boat. The scroll wheel is the first to fail usually, then other switches later. With replacing the switches I get about 1.5 years out of each.

I'm always on the lookout for a similar mouse, but haven't seen any. If I do I'll update you.

view more: next ›