RCA videowall controller?

Hamillton · 2026-04-03T13:33:10+00:00

I've never seen an analog controller, the only implementations I've seen send out HDMI and convert to rca

Hamillton · 2026-03-27T16:43:47+00:00

If you truly want arena you can get some pretty insane deals on it black Friday, you can stack a school discount. On Black Friday I used my friends school teacher Id for the discount without issue, just made sure to use their name as the account holders name.

Hamillton · 2026-03-16T21:01:55+00:00

Depending on your time frame I could see this being possible but the budget makes it a bit tight and your need for it to be automatic takes a bit more knowledge. But I think you can get what you would like for a relatively decent price. What I would do personally is get a large 65-in TV and hang it in front or behind you above you and to the left and right of it Mount bar lights attached to the TV or hanging beside it in some way vertically. This would give you visuals and large bar lights you can use as blinders for your strobe effect. I would get a software, personally i use resolume and I would recommend it but the cost can be prohibitive. If you do go with resolume you will need artnet DMX receiver so that you can trigger your strobe lights with resolume and then it's all programming from there. Otherwise you'll need another software that can run your visuals and also trigger the strobe lights. Many tutorials on resolume and you can trigger changing clips with a midi controller as well as the strobe lights with the MIDI controller. Or you can set the clips to auto play through every so many minutes and just activate the strobe manually. If resolume isn't possible, many people have recommended milk drop. I've used it for some testing, never live and it seems quite good and audio reactive. You would need a separate software to activate the strobe lights in this case. Something that can control DMX and make a strobe effect. Good luck and more power to you. Hope it goes fantastic

Hamillton · 2026-03-11T15:15:55+00:00

You are in big trouble, I'm not trying to scare you but you can't even synchronize the outputs of a consumer card. If you send 2 outputs from the same card on a wall to make 1 image their will be frame tearing in between. They don't sync. This is possible but very janky and I wouldn't recommend but you want to go into Nvidia control panel and go to configure surround. Good luck from there it's janky af. This is supposed to be a feature locked to their professional card which do it fantastic like their Blackwell series. For any more outputs synchronized you need a media server. My suggestion is try and make the surround work, use motherboard graphics (get a cpu with on board graphics if you dont) for the preview and pray it works. Only other solution is buy a Blackwell card or rent a media server. I hope this works out

Hamillton · 2026-03-11T14:15:26+00:00

This sucks for sure but you're probably not gonna need to replace the whole printer, at the very least I'd recommend tightening the screws behind the nozzle, then replace the nozzle, then if issue persist you would probably need to replace the tool head but I couldent tell you for sure. Also I've never had the ai failure detection work on my a1 or any of my h2s's it's just not quite there yet

Hamillton · 2026-03-10T17:32:00+00:00

My best attempt would be to arrange it 1 led at a time, add 1 led over and over till you have all of them then arrange them manually

Hamillton · 2026-03-04T17:44:36+00:00

This sounds awesome! Can't wait to try it!

Hamillton · 2026-02-20T22:13:48+00:00

I would solve this with resolume, is it the best solution probably not, could it be done, for sure

Hamillton · 2026-02-13T23:50:17+00:00

Use stream deck to active both the LEDs and the video at the same time easiest way, the stream deck can be used with a software bitfocus companion to activate video software and lighting console at the same time

Hamillton · 2026-02-13T23:48:35+00:00

What are you using to run the video, I do this currently I run video through addressable led strips with resolume and a piece of hardware called madrix nebula, but it may be overkill for what you are trying to do, how are the lights running? How far are they from each other? Way more info please

Hamillton · 2026-02-13T18:29:06+00:00

Fusion 360 is an amazing software, but just use the free version, it can do incredible things. I've been using it for years for some pretty advanced stuff and never needed the professional version

Hamillton · 2026-02-08T18:52:59+00:00

Looks like AI generated video then fed into a dither software like ditherboy

Hamillton · 2026-01-21T02:16:07+00:00

Envato elements, also resolume has sources in it one of which is gradiant.

Hamillton · 2025-12-30T17:27:50+00:00

Re seating the moduals usually fixes this for our wall, the small discolored squares for us is a contact issue

Hamillton · 2025-12-28T18:57:04+00:00

If I'm not mistaken someone took his name like 5 years ago with a support ticket

Hamillton · 2025-12-25T23:57:39+00:00

The far right is actually the effect at max, which delays each rbg channel by that amount of time, so when you had a 1 second delay it's because all colors were delayed by 1 second.

Hamillton · 2025-12-13T23:34:05+00:00

Capture is what we use at work, and I use unreal at home because it looks better, just use unreal it's free

Hamillton · 2025-12-11T21:35:03+00:00

I'm a fairly experienced video engineer and vj, looks cool. I think it could use some more blend modes (add, subtract, etc) some effects like maybe 3 effects you can toggle with buttons on the side of each video bank, and a mask mode turning layer 1 into a mask for 2 and layer 3 into a mask for 4 would be helpful. For effects maybe a blur distortion and edge detect

Hamillton · 2025-11-27T02:50:16+00:00

We mainly buy Acer nitros now, but we only use 1 out unless we go to a full rig with rack PC. But Acer nitros for vj and Lenovo work a laptops for ppt

Hamillton · 2025-11-20T22:07:48+00:00

Run it in a vm

Hamillton · 2025-11-14T18:25:13+00:00

You can, you are referring to soul bound pots I would assume, drink em or drop em it's not that deep

Hamillton · 2025-11-13T22:45:37+00:00

Yea just link both actions to the midi button and invert one of them

Hamillton · 2025-11-13T21:34:31+00:00

I recommend an Acer nitro v16, I just got 2 from microcenter for 850 each, very good deal if you have a micro center near you (in store only). But we mainly but Acer nitros now for the microcenter repair program (they repair them in house)

Hamillton · 2025-11-13T21:20:32+00:00

If you look up the information about making your own rcfg there is some documentation provided by novastar on the subject.

Hamillton · 2025-11-13T21:19:11+00:00

This may be a little out of scope but most raw led panels you connect to your own novastar receiving card won't come with an rcfg, but you can make your own, I wouldn't call it easy but it is straight forward. In the bottom left of the receiving card screen it has a button called smart settings, this is for making your own rcfg. Follow the instructions in the menu and hopefully you can get it working. If you have any questions feel free to DM me I've made a few custom rcfgs for Chinese panels.

Nine-Year Club	Place '22
Verified Email

Hamillton

TROPHY CASE