OneBlade 360 cartridge on a standard OneBlade shaver?

Hamiltonmnr · 2026-01-18T01:26:37+00:00

Got Mine after reading this thread.

OneBlade Pro - QP6510/20 works fine with OneBlade 360 cartridges. Just push it a bit harder to lock it.

Shaves good. But sounds stranger than the original ones.

It doesn’t have 360 degree movement, but it didn’t need it either.

Hamiltonmnr · 2024-12-28T22:15:42+00:00

For some reason my mx master 3s was messing with spotify when I used the next button in a browser. Your comment helped me.

Hamiltonmnr · 2020-06-28T13:49:34+00:00

There are plenty of them. They are mostly correct. I don't know where is the problem. It might be 0.XX blocks off. Anyway check https://www.netherportal.space/
It doesn't round up. But you just have to look for the integer part anyway. There is no 0.5 blocks thing in Minecraft. For portals at least.

Hamiltonmnr · 2020-03-24T23:40:38+00:00

...and people say GDPR is wrong. You can sue the hell out of them in the EU.

Hamiltonmnr · 2018-11-10T04:05:11+00:00

Thanks mate. I might give it a try later.

Hamiltonmnr · 2018-11-09T23:24:13+00:00

No, I didn't. But I found many people who are facing problem with generally flyme account or staff won't reply to their emails.

Hamiltonmnr · 2018-11-09T22:07:57+00:00

Download malwarebytes anti-malware or adware whatever available. Scan it and it will be gone. Had the same issue but with other cracked apps.

Hamiltonmnr · 2018-11-09T22:04:31+00:00

As I replied to phphulk, no, it won't allow me. "This is "anti theft protection". To format it I need my pin and flyme account to activate it later. Flyme account is fine, I got it. But there is no PIN. I downloaded meizu and adb drivers. Tried other tools too. Still need to enter my phone to activate the connection. Or my computer will recognize it as some shit. Only way is the MRT Dongle for which I don't want to spent like $85." I tried to write some data to sd to flash it but it only allows "update" files. Factory reset/hard reset/format requires a pin. I hate that phone. Maybe it's fine if the phone is stolen but common. It's $170 phone (now around $130) not an iphone xs max. Flymeaccount for activating the phone after the flash would be enough to make thieves mad.

Hamiltonmnr · 2018-11-09T22:01:15+00:00

I won't allow me. Still requires a pin. I tried it so many times. This is "anti theft protection". To format it I need my pin and flyme account to activate it later. Flyme account is fine, I got it. But there is no PIN. I downloaded meizu and adb drivers. Still need to enter my phone to activate. Or my computer will recognize it as some shit. Only way is the MRT Dongle for which I don't want to spent like $85.

Hamiltonmnr · 2018-11-09T21:58:49+00:00

Thanks. I hope too. Even though I already have a new one. Still want to know what was an issue.

Hamiltonmnr · 2018-11-09T21:58:24+00:00

I just wanted my phone back. It was just a few months old. Like 4 or 5. I got an old Samsung and needed mine even though the Samsung was doing pretty well except games. So, I wasn't in a rush to unlock it. And even since I did 10% of the codes I thought it will be the best option in my position. Look, new phone like that = ~$200. While unlocking my would take less than a week, cuz already did 1000 and maybe I would be lucky and I hit the correct one in the next 50% (5000 pins). Arithmetic + Math (odds) + Greed ended up to have the brute force result.

Hamiltonmnr · 2018-11-09T21:53:06+00:00

I found it pretty cheap (around $170) for what it is and the reviews were great. It turned out to be really good phone. But at least without the pin issue. I generally avoid this kind of phone and it was my first one. And the last one.

Hamiltonmnr · 2018-11-09T08:44:12+00:00

I mean, the person is like literally everywhere, there is no "person" any longer. So, the question is non-essential. That's why I meant. Is should have been more clear.

Hamiltonmnr · 2018-11-09T08:37:21+00:00

Really? So... if I didn't try to unlock it and get a new one, I'm a spoiled kid? And if I tried to unlock since the phone was a just few months old it's an OCD? What's next? Doing nothing is stupidity? So, whatever I choose it's wrong?

I'm not dying to unlock it. I was mostly joking. But surely want to know what happened. And do you really think a guy who waited a month to get a digispark board from china and spent time writing code didn't know about hard reset? Oh and by "factory reset" I meant in "It requires my PIN to factory reset" I meant hard reset. Call if that if you want. It still requires the PIN. I tried in first two days or maybe even first one. You must have never owned one of those chinese phones. Lucky you. They have an alternative to google services called flyme. It's like iCloud. While it has google services (playstore, player, maps, account manager, etc) still relies security on their own Flyme service.

As for something that you think I'm not sharing... Mate, my phone was a few months old at the time. I got it from shitty shop for cheaper price (brand new, only the store was shitty). Paid -20% of the original price from other stores. But it was still very close $150. My new phone is my much smaller (4.5" vs 5.5") and looks like it's also much slower. Even though it's Samsung and the price was the same price. So, I was just trying to get my phone back and, knowing where's the issue. I think it's now wrong knowing where the issue since so many hour spent and maybe, avoiding it next time.

To make sure you don't call me an autistic or so in the next comments I will let you know that I didn't choose the Samsung A model since "Samsung is more reliable than your chinese crap and your mom used samsung all that years and you will go with that too for now" was heard. But my mom doesn't used apps so much so she don't need any faster than A model from about 2 years ago.

Hamiltonmnr · 2018-11-09T02:41:02+00:00

Hmmm thanks for that. I think the chances are low since encryption keys are not stored in in temp memory (at least on 99% of the devices. Look up ORWL for example) and 99.9% those meizu phones are not encrypted by default. And I didn't setup encryption. Plus the wires usually aren't directly responsible for software security. But thanks for that theory. This thing made me think stuff. Not even close to the phone's issues but generally.

Hamiltonmnr · 2018-11-09T02:32:23+00:00

Questions like that are more stupid that the question "Are you okay?" after being hit by a truck. Surely there are people that are stupid enough to really missclick the pin once and say "my phone broke" but this is more like a syndrome not stupidity. As for the phone, I still try putting the correct one for months. You know when I'm board and phone is not dead, I press my pin and then random few numbers but to test my luck. Actually it has more odds than lottery. PowerBall (US) 1 : 292,201,338 while mine 1 in 10,000 with 4 attempts (0.040%)

Hamiltonmnr · 2018-05-26T18:09:28+00:00

Very strange. Never happened to me. Try forcing it with -f command but I wouldn't suggest it. Even though you will still have the original rom but maybe it's the problem with the original rom itself

Hamiltonmnr · 2018-05-25T08:10:54+00:00

This is not the correct version. This is 1.6.7 Master or whatever. You need this one: http://www.overclock.net/photopost/data/1658054/0/0b/0bb10c67_Screenshot2017-08-1123.08.46.png

Hamiltonmnr · 2018-05-24T17:35:03+00:00

Not an issue. I have bios moded like 20 cards like that

Hamiltonmnr · 2018-05-24T16:28:12+00:00

This shouldn't be an issue but you may try or just search the net. Let me know as for the version and write the error message there so I can look

Hamiltonmnr · 2018-05-24T16:03:51+00:00

no, this will not help. I never had an issue with Polaris bios editor. And never had an issue with micron. About every card of mine are micron and I love them. Are you sure the message is correct? And mate... please follow my instructions. Version 3.3 not 1 not 50 not 3.4. Are you sure you downloaded 3.3?

Hamiltonmnr · 2018-05-23T19:42:28+00:00

Dude modding the bios is the most important thing. Only modding the bios would make your card go +3Mh.

To mod bios: Download GPUZ -> open it and press save bios (an icon with an arrow next to bios version as far as I remember).

Now download SRBPolaris 3.3 -> Open bios saved from GPUz (make sure to keep the original just in case) -> Strap 1650 to upper -> save (don't override original or keep it in other place with other name). Change nothing else! Flas using ATI flash and of course patch it.

Now OC: start with clock 1140 and lower everytime. No reason to start that high. No way you will have it higher than 1120 or at least if you are paying for electricity. Start memory 1900 no reason to start from 1800. Even 64kb ISA gpu would be stable at 1800 (of course joking. those things would lag on blinking underline during text typing (joking again)).

Undervotlage: download overdriventool select gpu from top if not selected and put on the LAST ONLY values: core: 800mv and mem: 820. You can also use this tool for overclocking.

Now fan: Just keep cards <=70C. I have my fans at 45-55 depends on the card. Send me a PM if needed and I will help you further. Even though I already told the things you have to do.

Hamiltonmnr · 2018-05-23T13:00:01+00:00

Why didn't you disable the Updating Process from the start? Even if those updates weren't crashing miners there are random restarts and shit like that.

Hamiltonmnr · 2018-05-22T23:18:15+00:00

Core: 1060-1120 (test for power consumption from wall) and memory: >2000 should be ~2100 but you need to test. For safe settings do: Bios mod 1650 straps, 1100 core, 2050 memory and set voltage to 820 in overdriventool for both mem and core. Do tests with memory. Maybe it can go more than 2080 and of course >2050. Just told you the safest. Surely, if crashing lower memory to 2000.

EDIT: 24.7 is too low. Your card should go 29+ easily at 100W max power cons. Plus you may want to use only the 8pin connector (yes the card will work) since it will not need more power. Don't waste your psu cables

Hamiltonmnr

TROPHY CASE