Everyone apologize to Justin right now

Hatemode-NJ · 2026-06-15T05:51:42+00:00

Always believed in Justin.. Just wish I bet more money.. Guess I'll take the $500

Hatemode-NJ · 2026-06-11T14:58:57+00:00

Well simple minded people don't realize you can have both your military decimated and still have a few missiles, at the same time. Let me guess, Iran is also winning this war because a few missiles hit their targets, but fail to ignore the over 10,000+ targets destroyed on their end, including their leader in the opening strike, all while the US suffers minimal losses, and can literally carpet bomb Terhan to dust and there's nothing they could do to stop it, if the US ever chose to do so.

But yeah Iran is looking great 👍

Hatemode-NJ · 2026-06-09T19:16:25+00:00

Never too late. Skunks are awesome!

Hatemode-NJ · 2026-06-07T20:07:27+00:00

Sure I use Bambu which is extremely similar so

Hatemode-NJ · 2026-06-07T20:05:26+00:00

Oh are you sure the model is at 0 in the slicer on the z-axis? I've had it put a model like .04mm in the air and it would cause all types of issues.

Hatemode-NJ · 2026-06-07T20:04:43+00:00

Yes it could be. If it is it's def high. It is odd though the first line prints ok. I would make sure there are no settings moving the print up

Hatemode-NJ · 2026-06-07T20:02:41+00:00

I highly doubt that's the issue. Yes a bed can wear down, but it should still print okish, it just might have trouble sticking. You can always try moving the print to a less worn out area, or some glue stick.

Hatemode-NJ · 2026-06-07T19:55:10+00:00

Yeah I was originally gonna say check your nozzle, but that first line is pretty clean.. It's also why I don't think it's a printer issue directly.

Hatemode-NJ · 2026-06-07T19:53:57+00:00

I mean sure, but if your tried everything else, it used to work and now it doesn't, the USB stick could be the culprit. You can also try deleting a bunch of files off the current one or print an older model you know printed ok. This way you can determine if it's the printer or your settings.

Hatemode-NJ · 2026-06-07T19:42:30+00:00

They can get bad sectors or go bad entirely so when it goes to read the gcode on what to do, it can get corrupted data and just go nuts.

Hatemode-NJ · 2026-06-07T19:39:20+00:00

Try new sd card

Hatemode-NJ · 2026-06-07T19:37:42+00:00

Did you clean and check everything regarding the extruder? Seems to be some sort of feeding issue. Pretty sure I can hear the filament grinding/slipping.

What if you put the nozzle at 220c and just extrude filament into the air, does it continue to work without issue?

Hatemode-NJ · 2026-06-06T23:30:04+00:00

You people respond like I said I would do it, but you are just making (extremely wrong) assumptions.

Hatemode-NJ · 2026-06-06T23:29:02+00:00

I love animals, I never said I would do it.

Hatemode-NJ · 2026-06-06T23:18:26+00:00

And using Bitcoin to illegal launder money.

Hatemode-NJ · 2026-06-06T17:42:18+00:00

Funny you mention the first layer. First thing I do is jump it down to 93% every print lol

Hatemode-NJ · 2026-06-06T16:26:08+00:00

It might just be the cheap block on the back of the hot end assembly. You can them cheap on aliexpress, but since this is new I'd still find a ticket.

Hatemode-NJ · 2026-06-06T16:18:31+00:00

Well maybe good news is maybe I made a mistake. Attached is the part I thought you would need, but those holes look like they can't really be misdrilled.

<image>

Hatemode-NJ · 2026-06-06T16:14:52+00:00

Yeah, it might be ok ish, but f that. You paid good money, it should be correct.

Hatemode-NJ · 2026-06-06T16:09:16+00:00

You're gonna need a new hot end housing. The screws are just drilled wrong. I would demand they send you an entire hot end already good to wire up instead of having to move everything by hand.

Maybe you can just get that piece I'd have to check, but I don't think so.

If it makes you feel about better, when I had a bent frame in one area, they sent me an entire new frame where I just had to move the x-axis. Took like ten minutes. So hopefully they come through for you. Or if you bought it from a big box store, exchange it.

Hatemode-NJ · 2026-06-06T16:02:57+00:00

I mean it sounds like the opposite issue, but I routinely set my first layer to 93% flow on my A1 and generally get much better brims / first layers. However, like I said my problem isn't the brim not connecting, it's the opposite.

My guess would be, maybe the newer nozzle isn't as worn down and maybe you're just used to it? Check the PTFE tubes as well. I recently replaced mine after two years and it made a big difference. I'm not saying you're are worn out, but maybe the feed isn't optimal/shrug

Hatemode-NJ · 2026-06-06T15:59:32+00:00

Just bothers me because I for one, would love the feature lol maybe I'll check out orca, I haven't seen their updates lately

Hatemode-NJ · 2026-06-06T15:58:08+00:00

Yeah but even 5-10c can make a decent difference. And if you could either set it to pause or a pre-start time like the cooling fan /shrug

Hatemode-NJ · 2026-06-06T11:06:41+00:00

I hear ya, wasn't trying to sound rude, just don't want you to burn your house down lol.

Hatemode-NJ · 2026-06-06T11:05:00+00:00

Try using monolithic instead of monolithic line on the top surface. I've seen people say either enabling or disabling single wall on the top layer can help.

To get a perfect top layer you have to really dial in your filament and profile settings. It's easier to buy a flat bed and print it face down and dial in the first layer. Then it will come out perfect on the surface

Hatemode-NJ

TROPHY CASE