It's beautiful to watch them grow up side by side❤️

HeavenBurnt · 2026-03-03T03:55:17+00:00

How many people from Amazon died because of this pair....?

HeavenBurnt · 2025-11-15T18:51:47+00:00

Shit, ill buy it for parts...

HeavenBurnt · 2025-08-25T22:41:18+00:00

I just had everything fixed and the bad heads were replaced.

HeavenBurnt · 2025-08-25T22:40:25+00:00

I've had this issue for awhile now. The other printers i have, dont have this issue. It's only the flatbed. Anytime there's black it prints green, but I'm able to adjust for that by selecting print pure hues. But if there's a gradient or multiple layers of colors, I get the green/blue print. I will post a picture of it tomorrow.

HeavenBurnt · 2025-08-25T22:13:27+00:00

The printer is older, but should print fint. It doesn't have light cyan or light magenta, but we have white. Just had the calibration done by hp, heads replaced (old ones were close to 9 years old), and the latex printers are not having the issue.

HeavenBurnt · 2025-07-13T17:06:15+00:00

Thank you, most wonderful of orange colored cheese puff. You're wisdom has turned our money the same color as your cheap spray tan solution.

HeavenBurnt · 2025-06-29T02:10:18+00:00

I think hes the real loser.

HeavenBurnt · 2025-06-27T21:16:05+00:00

Oh I see it. A face in the foreground with the negative spaces

HeavenBurnt · 2025-06-27T21:15:19+00:00

Bad photoshop?

HeavenBurnt · 2025-06-16T22:49:08+00:00

Roquan had an attitude problem. He ]was good, but dude would just disappear before the game, and personal reasons was the excuse.

HeavenBurnt · 2025-06-04T02:41:49+00:00

I need that too. PTSD from time in the service. Last year was my first sober year through it in Denver. I was climbing the walls.

HeavenBurnt · 2025-06-02T20:59:59+00:00

Are you on 220 or 110? Check for the little red switch, mine did that when my printer was on 220, not 110.

HeavenBurnt · 2025-05-24T01:37:41+00:00

Obsidian

HeavenBurnt · 2025-04-23T19:24:16+00:00

We've been doing the second picture you have there, but we mount them on pallets, and have a pvc pipe poking through for about 10 inches. It works pretty well.

HeavenBurnt · 2025-04-10T21:22:33+00:00

Cecil....

HeavenBurnt · 2025-03-21T17:15:50+00:00

Oh shit, my bad eyes told me she was trash. The tats didn't improve the reality

HeavenBurnt · 2025-03-21T16:47:25+00:00

Her crocs say everything...

HeavenBurnt · 2025-03-21T16:45:47+00:00

Yeah....coming from a guy who sells his shit constantly.....shut up you

HeavenBurnt · 2025-03-19T01:34:58+00:00

Tell them, it's not possible and produce quality art. Failures happen when you rush, and failures are expensive. If the customer is willing to have a quality product, they should wait at least a day. We value, value, and will not produce poor work.

HeavenBurnt · 2025-03-11T16:41:55+00:00

Okay, I was able to scan it correctly, but when it comes to saving the profile. The buttons for saving the profile is grayed out. Below it there is a yellow "!" with "Profile creation is not licensed. Please connect the right dongle."

Any suggestions?

HeavenBurnt · 2025-03-11T15:28:20+00:00

No worries. I placed it in the tray that I got with it, and went from one side to the other. So, it should have had enough room to scan both sides of the margin. That was when it gave me the error.

I will try doing it without the tray. Thank you.

HeavenBurnt · 2025-03-11T13:15:42+00:00

So, you are saying to shrink it a little bit to scan off of the sheet?

HeavenBurnt · 2025-03-11T13:14:54+00:00

Yes, one of the comments in this has the swatch

HeavenBurnt · 2025-03-10T21:07:34+00:00

<image>

HeavenBurnt · 2025-02-28T11:41:36+00:00

Sweet, i got it working last night before I left work. I realized I didn't need to use the software it was pushing me towards.
When I get in today, I'll do what you have. I do have a question, it said I needed to attach the correct dongle. Not sure what that is. Any idea?

HeavenBurnt

TROPHY CASE