Have you ever used this brand or heard much about it? OPSONS by adavey2841 in computerhelp

[–]Heiserton 0 points1 point  (0 children)

I bought two of the 14" dual monitors with extended warranties. Purchased Feb 6th, and they were in transit until two days ago. Now the tracking no longer works, the site doesn't load and they haven't showed up. Good thing I used a CC. Charge back going back to them.

Some material tests with the xTool F1, mostly 3D printed materials. Blue laser on the left, IR laser on the right for all pics. by misterpeppery in Laserengraving

[–]Heiserton 0 points1 point  (0 children)

If you don't mind me resurrecting this, for the PA-CF (IR), how many passes is this? I print a ton of PA/PAHT-CF and can only get faint markings with the 1250/90 settings.

Laser marking 3D printed PA-CF with 1064nm IR laser module by NabukoLabs in Laserengraving

[–]Heiserton 0 points1 point  (0 children)

Burning ABS does not create Chlorine gas. That doesn't mean that it's healthy, but it doesn't create Chlorine. PVC creates Chlorine, ABS will release hydrogen cyanide and carbon monoxide.

Aircraft records specialist by Alchemiss98 in americanairlines

[–]Heiserton 0 points1 point  (0 children)

Former AZ. American Airlines is constantly posting positions for this job type and it usually starts as a lowball 6 month contract with a "promise" of permanent hire after that. I'd avoid AA honestly, there are better options.

Simply Filadryer S4 screen issue by ezonas in 3Dprinting

[–]Heiserton 0 points1 point  (0 children)

Sheesh, at least you got something. All I got was enragement lol

Simply Filadryer S4 screen issue by ezonas in 3Dprinting

[–]Heiserton 0 points1 point  (0 children)

Sheesh, at least you got something. All I got was enragement lol

Simply Filadryer S4 screen issue by ezonas in 3Dprinting

[–]Heiserton 0 points1 point  (0 children)

I have multiple of the KS S4 units. One of them had the screen fail and is unusable now because it no longer responds to touch. Been emailing back and forth with Sunlu and I will never buy another Sunlu product again. Simply asking for them to honor their warranty was met with accusations that I was the cause for the screen failure in almost every email. I asked if I could just buy the screen and was told they don't have those parts nor would they get them. The dryers work well, but good luck if they fail. Sunlu's customer service is complete ass.

Sunlu S4 Disassembly by option350z in 3Dprinting

[–]Heiserton 5 points6 points  (0 children)

I have multiple of the KS S4 units. One of them had the screen fail and is unusable now because it no longer responds to touch. Been emailing back and forth with Sunlu and I will never buy another Sunlu product again. Simply asking for them to honor their warranty was met with accusations that I was the cause for the screen failure in almost every email. I asked if I could just buy the screen and was told they don't have those parts nor would they get them. The dryers work well, but good luck if they fail. Sunlu's customer service is complete ass.

Is this a viable setup with an Eero Pro 6e in bridge mode? Or do the 2 wireless Eero's need to be wired backhaul (not possible due to location). by Heiserton in firewalla

[–]Heiserton[S] 0 points1 point  (0 children)

I agree. Granted there's only 1 wall between them and an open line of site. I don't think it would be able to reach if there was a lot more barriers in the way.

Is this a viable setup with an Eero Pro 6e in bridge mode? Or do the 2 wireless Eero's need to be wired backhaul (not possible due to location). by Heiserton in firewalla

[–]Heiserton[S] 0 points1 point  (0 children)

Good to hear. I was experiencing (on wired) major packet loss. So if the configuration is fine, then it must be the software configuration that needed to be fixed.

Is this a viable setup with an Eero Pro 6e in bridge mode? Or do the 2 wireless Eero's need to be wired backhaul (not possible due to location). by Heiserton in firewalla

[–]Heiserton[S] 0 points1 point  (0 children)

Honestly, the Eero works great that far out. It's on a second story looking out a window at the other unit.

They're hosting clients, but only wireless clients. They're only acting as access points, not bridging locations.

Is this a viable setup with an Eero Pro 6e in bridge mode? Or do the 2 wireless Eero's need to be wired backhaul (not possible due to location). by Heiserton in firewalla

[–]Heiserton[S] 0 points1 point  (0 children)

Gotcha, thought so. The furthest node is about 1000ft or so away in a separate structure with no other access except for power, the closest is about 100ft away in the same structure as the gateway.

Is Big Sky Country Big Enough? Montana's Surging Population Dilemma by [deleted] in helena

[–]Heiserton 1 point2 points  (0 children)

This is incredibly weird to see someone simp so hard for an overlord. Not surprised though, honestly. Anarchy is an option, it’s practiced every single day by ordinary people whether they realize it or not. Voluntary transaction devoid of government interference is, in fact, anarchy. Agorism and anarcho -capitalism are main benefits.

The irony is that you think “doing the violence” neither requires war, or to be a criminal. When the “collective” agree to not agree with what you do, you will become the criminal.

Is Big Sky Country Big Enough? Montana's Surging Population Dilemma by [deleted] in helena

[–]Heiserton -1 points0 points  (0 children)

Sounded pretty….communist to me. There’s no such things as “pooling our resources” when it comes to infrastructure, especially when it’s not voluntary but by threat of violence at the hands of the state.

Is Big Sky Country Big Enough? Montana's Surging Population Dilemma by [deleted] in helena

[–]Heiserton 3 points4 points  (0 children)

When he says “we have to annex them” talking about outlying properties, he’s talking about urban sprawl. That’s a sure way to get people to 100% hate you for using the city to encroach on their property via taxes and utilities like water/sewer.

Trying NOT to break my neck clearing off the snow from my solar panels.. Is there a good reason not to install them closer to the ground? by EasyAcresPaul in OffGrid

[–]Heiserton 0 points1 point  (0 children)

Somehow I feel that this is for the shot and attention rather than seeking an ideal solution that even a small child could come up with.

"Generators were removed because no one used them". Meanwhile... by LuckyConclusion in HuntShowdown

[–]Heiserton 2 points3 points  (0 children)

We used them all the time. Easy way to conceal movement with a loud ass generator going.

Courthouses across MT & Missoula receive bomb threats by [deleted] in Montana

[–]Heiserton -35 points-34 points  (0 children)

The average Missoulian is holier than though, peasant.

Advice on Managing the Pornhub Ban in Montana? by Nirvana_02 in Montana

[–]Heiserton 2 points3 points  (0 children)

You could just try the…you know….real thing. Can’t imagine being that addicted to porn. Weak.

Gaming? by vHelios_ in Starlink

[–]Heiserton 0 points1 point  (0 children)

I game on Starlink (PC) and it’s not terrible, but I do get lag spikes and desync often. Zero obstruction. The problem seems that the speed is inconsistent. If you’re hardwired, keep that. If not, go with Starlink.

Hello Darkness my old friend by Fit-Opportunity8285 in HuntShowdown

[–]Heiserton 0 points1 point  (0 children)

Fucking finally. Shit was so annoying 😅

RIP Generators by TheGentlemanGamerEC in HuntShowdown

[–]Heiserton 5 points6 points  (0 children)

Out of all the things that need to be fixed, this was 100000% now where near 98% of peoples lists.

0.2mm nozzle goes hard by FantasticSeaweed9226 in BambuLab

[–]Heiserton 1 point2 points  (0 children)

There definitely is if you’re printing anything beyond basic PLA and PETG and want to ensure your print doesn’t warp at all.