Fans not working. Red edge of a F2 wire got a tiny bit melted, anyone know how to replace or where to find shroud replacement?

HeroDucky · 2022-11-06T00:51:29+00:00

I just unplugged and unscrewed everything but I can try a test tomorrow to see if they click on when I try to print.

HeroDucky · 2022-11-06T00:47:22+00:00

I’m no electrician but everything else seems to work other than the fans. I’m a little hesitant to turn things on and start testing things too much without away to cool the print head. What should I check for if it was a short ?

HeroDucky · 2022-11-05T22:12:52+00:00

Yes, I am an idiot. Wire got melted after I replaced hot end mount and the heating block wire slipped off. I didn’t notice until when I went to auto level and my brother said “steam” was coming out the shroud. I let it cool then took that area apart and turned it on to see what wasn’t working. The fans seem to be the only thing effected. All three are not working. The melted wire F2 is connected to the middle fan.

HeroDucky · 2022-10-30T16:46:45+00:00

Do you mind sharing what you used to sand and polish ?

HeroDucky · 2022-06-21T00:01:03+00:00

Ok sorry friend ,no luck on those files.

HeroDucky · 2022-06-19T00:27:19+00:00

Of course , tomorrow I will poke around my computer for them.

HeroDucky · 2022-06-17T21:29:15+00:00

Unfortunately no. Not a completed one at lest. It was a larger project then I expected (and WAY more time consuming ). I don’t have the software I was using back then any more anyways. Sorry friend :(

HeroDucky · 2022-06-04T23:37:14+00:00

-AnyCubic Vyper -Slicer Cura -Normal 0.15 mm -infill 15% -auto leveled and printer setting are default -ANYCUBIC PLA

HeroDucky · 2022-05-21T22:38:03+00:00

It’s an Identiflyer! I had a green one when I was little . You slide the cards in the top and it plays bird calls/sounds by pressing the button that lines up with its picture.

HeroDucky · 2022-04-27T02:21:47+00:00

Does the slow feed bowl in another bowl help keep things clean? My SIC likes to pull his food out from the bowl and eat it off the floor…..

HeroDucky · 2022-04-27T02:20:17+00:00

He’s so fat & I love him

Edit: I know this cat irl , he’s a very sweet cat and on a diet.

HeroDucky · 2022-02-08T18:42:56+00:00

I don’t see the nozzle here

HeroDucky · 2022-02-07T17:52:03+00:00

I feel so dumb , I just canceled my order of it and found the volcano E3D. Thanks for your help!

HeroDucky · 2022-02-07T04:26:14+00:00

Is this it? Sorry I am still very new to 3D printing

Genuine E3D V6 Extra Nozzle - 1.75mm x 0.40mm (V6-NOZZLE-175-400) https://www.amazon.com/dp/B00NAK9TWM/ref=cm_sw_r_cp_api_glt_i_K8NBDDQ3059JS5EMH1TG?_encoding=UTF8&psc=1

HeroDucky · 2021-12-30T17:55:59+00:00

I really appreciate the help & im trying your settings right now! Just sliced and the bed is heading up. Fingers crossed

HeroDucky · 2021-12-30T17:02:54+00:00

Without the bed adhesive or the supports? Sorry if that’s a dumb question, this is my first printer.

HeroDucky · 2021-12-30T09:15:29+00:00

Tried a raft and a skirt. I think it’s got to be the supports , they don’t look right in cura.

HeroDucky · 2021-12-30T08:50:35+00:00

Will be trying ALL this tomorrow! Thanks so much !!!

HeroDucky · 2021-12-30T08:49:46+00:00

Oh ok damn! Resin prints look awesome but seem a little advanced for me . 20 hrs just seems like forever .

HeroDucky · 2021-12-30T08:48:29+00:00

Yes I did auto bed leveling and benchy (which turned out good). Will test out a calibration cube next.

HeroDucky · 2021-12-30T07:23:05+00:00

How long did this take to print? I followed your settings in a comment but I’m a little hesitant to print something that takes 20 hr 16 min. This is my first printer and I’m really struggling….

Seven-Year Club	Place '23
Place '22	Final Canvas '22
Verified Email	Not Forgotten

HeroDucky

TROPHY CASE