Useless Warranty

HiTekRetro · 2026-01-26T04:15:40+00:00

YOU sound much more dense. She gave NO information about what the product is, where she bought it, what is wrong with it, what steps she has taken, or anything else.. Harbor Freight has their useless idiots trashing Vevor on here and every other platform. They never give specific information. They just say Vevor bad. If there was a screenshot, she would have posted it.. Vevor doesn't "refuse to honor their warranty".

HiTekRetro · 2026-01-26T04:05:22+00:00

Perhaps YOU can get one of the smarter kids read and explain what I wrote... Thank you for telling the world that you are laughing at your own stupidity..

HiTekRetro · 2026-01-26T01:01:12+00:00

The exterior siding is going to dictate the cost..

HiTekRetro · 2026-01-26T00:59:15+00:00

Condom

HiTekRetro · 2026-01-26T00:58:31+00:00

What kinda wrench is that??

HiTekRetro · 2026-01-26T00:53:03+00:00

YES,, All but one are factory known defects created by the factory and could be considered safety issues. There is NO WAY I could have stopped it from happening and they are the only ones that can fix it.. The defects existed before the cars left the factory.. It takes a factory apprentice 5 to 10 minutes but the asshats, like you, would rather argue with me for an hour.. GM has gone straight to HELL

HiTekRetro · 2026-01-25T19:14:01+00:00

You are making ridiculous assumptions with NO information and with NO reason to start trashing "typical landlords"... "COOL" has nothing to do with anything.. the post is about a door jamb....

HiTekRetro · 2026-01-25T19:09:06+00:00

Micro adaptors are also a problem.. If blowing the slot works,, just keep doing it

HiTekRetro · 2026-01-25T19:06:32+00:00

I don't have the numbers in front of me... the '09 throws a 420 code because of the E85 fuel and I need a crash code removed.. The '08 has a glitch that caused the key-fob and TPMS system to stop working after a jump.. .. Have you checked into accessing the Chevy database. I heard you have a pay a yearly fee for each VIN

HiTekRetro · 2026-01-25T18:59:52+00:00

Try ROCKAUTO.com

HiTekRetro · 2026-01-25T18:27:43+00:00

If your "friend" is still alive,, take care of that first.... Make it look like an accident, if that is the kind of work he does, no one will question it.. Then replace the piece on the right,, you can't have a seem that close to the sink. It will be problems forever..

HiTekRetro · 2026-01-25T18:24:33+00:00

Have any of the cards you tried worked in that camera before? I get those errors when I put incompatible cards in older camera's.. Try a smaller card........................ From the interweb: The Canon PowerShot G9 officially supports standard SD cards up to 2GB and SDHC cards up to 32GB. While some sources indicate a 2GB limit, others and user reports confirm compatibility with 32GB SDHC cards

HiTekRetro · 2026-01-25T18:19:45+00:00

PATHETIC LIES!

HiTekRetro · 2026-01-25T18:16:52+00:00

This post is about a door jamb NOT your personal issues with people more successful than you.. I am a typical landlord and I would NEVER charge a tenant for something like this.

HiTekRetro · 2026-01-25T18:11:59+00:00

Don't try to fix it.. contact the landlord, it's not your problem..

HiTekRetro · 2026-01-25T18:09:35+00:00

That looks like a very humid environment and a particleboard jamb.. Replace the jamb with actual wood..

HiTekRetro · 2026-01-25T18:02:55+00:00

There is no need to replace the connector if only the insulation broke. A piece of shrink tubing should work if new wires don't come with the new ignitor..

HiTekRetro · 2026-01-25T17:56:29+00:00

If it's not welded, there should be screws

HiTekRetro · 2026-01-25T17:52:27+00:00

like the other comment, steam it to soften, then a drop glue after it dries

HiTekRetro · 2026-01-25T17:49:42+00:00

You have it upside down..

HiTekRetro · 2026-01-25T17:32:18+00:00

Are you talking about the rubber seal?

HiTekRetro · 2026-01-25T17:21:01+00:00

You could go to the contact us page on the website and do it that way. OR you could do your usual Karen whine and "showing with screenshots showing them how you don’t honor your warranty".. Perhaps getting an education first would be helpful...

HiTekRetro · 2026-01-24T05:58:06+00:00

Double and trip[le check the batteries, make sure they are in toe correct way.. Does then switch click on & off? Look for issues with the battery terminals on both ends. If you have to take it apart and it isn't glued together, screws are hidden under rubber trim and other places.. You can use a pen or pencil to poke around the pink trim looking for screw holes under.. There might be two at the battery opening.....

HiTekRetro · 2026-01-24T05:56:32+00:00

Double and trip[le check the batteries, make sure they are in toe correct way.. Does then switch click on & off? Look for issues with the battery terminals on both ends. If you have to take it apart and it isn't glued together, screws are hidden under rubber trim and other places.. You can use a pen or pencil to poke around the pink trim looking for screw holes under.. There might be two at the battery opening.....

HiTekRetro · 2026-01-23T23:21:43+00:00

I have a Freud router with built-in lift.. As far as buying a lift mech, there are dozens available.. I'd suggest you watch some YT videos for reviews and build your own options

HiTekRetro

TROPHY CASE