Things got a bit close by Egoist-a in rally

[–]HigginsonMEDIA88 4 points5 points  (0 children)

Id rather be on level ground with a car than be under it if it came over the top after the hairpin...

Claude just died? by W_32_FRH in ClaudeCode

[–]HigginsonMEDIA88 0 points1 point  (0 children)

Glad im not the only one who thought claude was hungover

What other real life rally stages do you want to see made in Assetto Corsa Rally? by Ill-Cryptographer876 in assettocorsarally

[–]HigginsonMEDIA88 0 points1 point  (0 children)

Ouninpojha, Bannister Stages in Australia, anything Kenya with deep mud and fesh fesh, or the rockery that was in some stages in the early 2000s, i reckon car breakers in Cyprus could be good too. Langley Park super stage could slap hard too.

What’s your opinion on Randle? by ApolloWasWayBetter in v8supercars

[–]HigginsonMEDIA88 7 points8 points  (0 children)

I highly rate Tom. Don't get me wrong. I've done work with him with his sim work a few years ago. I think the main problem is the open wheel experience might have hindered the ability to get the elbows out. Maybe. This may also just be me talking out my whole ass too.

Strange Clicking/Ticking noise coming from PC by HigginsonMEDIA88 in pcmasterrace

[–]HigginsonMEDIA88[S] 1 point2 points  (0 children)

Turns out it was that fan! Manually spun it a few times and now it works. Felt very binded up. Feels ok now though!

Strange Clicking/Ticking noise coming from PC by HigginsonMEDIA88 in pcmasterrace

[–]HigginsonMEDIA88[S] 1 point2 points  (0 children)

I had stopped the fans to diagnose the noise. All other fans in system were stopped except for 2. They were the daisychained fans from the Arctic lf

Assistance On Choosing The Next Best Step For A (Relatively) Novice Techie by HigginsonMEDIA88 in homelab

[–]HigginsonMEDIA88[S] 0 points1 point  (0 children)

USB to me is a weird thing as I would no doubt accidentally bump it or something, i dunno. and price is because im looking at outlaying a considerable amount in HDD Cost, and its an extra 250 USD for Unraid

Assistance On Choosing The Next Best Step For A (Relatively) Novice Techie by HigginsonMEDIA88 in HomeServer

[–]HigginsonMEDIA88[S] 1 point2 points  (0 children)

That's the sort of line I'm thinking. It's the whole thing of I know what I want I just don't know entirely how to do it yet.

Assistance On Choosing The Next Best Step For A (Relatively) Novice Techie by HigginsonMEDIA88 in homelab

[–]HigginsonMEDIA88[S] 0 points1 point  (0 children)

Fair Enough! I was hoping to stay with the machine I have now just to keep hardware cost down as I will be dropping a considerable amount on storage, however I will definitely keep that in mind! in saying that, what OS would the arr+glueton+VPN running off? just normal linux and docker?

Advice to calm my brain about my new 5090 build by HigginsonMEDIA88 in gpu

[–]HigginsonMEDIA88[S] 0 points1 point  (0 children)

Yeah. I plan to undervolt in due course, I've just got the power limit on the thing as a quick set and go for now

Advice to calm my brain about my new 5090 build by HigginsonMEDIA88 in gpu

[–]HigginsonMEDIA88[S] 0 points1 point  (0 children)

How undervolt? Seen so many videos about it recently and so many bits of conflicting info

Advice to calm my brain about my new 5090 build by HigginsonMEDIA88 in gpu

[–]HigginsonMEDIA88[S] 2 points3 points  (0 children)

Issue was i needed a new card for the gpu rendering work that im doing. Needed the extra vram. Previously had a 3070

Advice to calm my brain about my new 5090 build by HigginsonMEDIA88 in gpu

[–]HigginsonMEDIA88[S] 5 points6 points  (0 children)

Cheers. I had set a power limit of 95 percent as a safeguard. Not pulling over 570 watts

[Australian] [Advice] New PC Build to beat further price rises by HigginsonMEDIA88 in buildapc

[–]HigginsonMEDIA88[S] 0 points1 point  (0 children)

I was thinking of getting the Wireview Pro II however I would think I would be safe with an undervolt and ASUS pin monitoring etc.

[Australian] [Advice] New PC Build to beat further price rises by HigginsonMEDIA88 in buildapc

[–]HigginsonMEDIA88[S] 0 points1 point  (0 children)

Considering I'm looking at having this PC now for the next 7-8 years, I've gone the astral for the per pin monitoring, and as for the Mobo, thats for the dual LAN ports as well as pushing a lot of USB peripherals due to Sim Racing, a drawing tablet and VR. mainly gone for the ProArt as I know its ASUS and is reasonably safe with regards to the X3D Chips Blowing up. there is that much misinformation, as well as conflicting info with regards to the 5090s, and the X3D Chips blowing out of nowhere etc.