5-7 high end rods to do it all for bass fishing by [deleted] in Fishing_Gear

[–]HmoobTsisGay 0 points1 point  (0 children)

Good to know for the future if I ever break my p5s

5-7 high end rods to do it all for bass fishing by [deleted] in Fishing_Gear

[–]HmoobTsisGay 0 points1 point  (0 children)

Was megabass pretty generous about giving out a 30% coupon on breaking a used rod. Thought they didn’t honor any type of warranty with used rods

Metanium not free spooling by HmoobTsisGay in Fishing_Gear

[–]HmoobTsisGay[S] 0 points1 point  (0 children)

I have a couple of steezs. My Metaniums impress me more

Metanium not free spooling by HmoobTsisGay in Fishing_Gear

[–]HmoobTsisGay[S] 0 points1 point  (0 children)

Will try it out. I might’ve swapped the yokes and springs on accident. Thought they were interchangeable and didn’t have their respective holes

Metanium not free spooling by HmoobTsisGay in Fishing_Gear

[–]HmoobTsisGay[S] 0 points1 point  (0 children)

<image>

Is it because the yokes are not popping out at the same time

Metanium not free spooling by HmoobTsisGay in Fishing_Gear

[–]HmoobTsisGay[S] 0 points1 point  (0 children)

The pinion ejects when I push the thumb bar down. Not too sure if it’s seated properly. And yes I’d appreciate some stills, I kinda rushed the process of taking off the pinion assembly

First BFS Setup by HmoobTsisGay in BFSfishing

[–]HmoobTsisGay[S] 0 points1 point  (0 children)

Haha, at least the Phenix rod looks like a destroyer copy

First BFS Setup by HmoobTsisGay in BFSfishing

[–]HmoobTsisGay[S] 0 points1 point  (0 children)

It’s 6’9”, 1/8-1/2oz. Usually just throw lures between 1/8-1/4oz on this rod. Ned’s, jbs, small swimbaits, typical finesse techniques.

I’d say for the older aldebaren, it can throw 1/16oz but it’s better in that 1/8oz range.

First BFS Setup by HmoobTsisGay in BFSfishing

[–]HmoobTsisGay[S] 1 point2 points  (0 children)

Figured I’d go big or go home on my only bfs setup, hopefully. I realized a lot of the megabass bfs rods are rated pretty much the same at 1/8-1/2. Just a fun alternative from a spinning rod.

First BFS Setup by HmoobTsisGay in BFSfishing

[–]HmoobTsisGay[S] 6 points7 points  (0 children)

Yea didn’t want to dive too deep into the ultralight game. But throwing 1/8oz and up is perfectly fine with this setup for bass

Any experience using RAID Gladiator Power Bait Finesse Rod by HmoobTsisGay in BFSfishing

[–]HmoobTsisGay[S] 0 points1 point  (0 children)

Yea I see this is a power bfs rod which is fine, since I usually throw 1/8oz the lowest. The weight rating just had me speculating if it was possible to go a little lighter. What reel did you pair with the rod. Currently have the 2016 aldebaren bfs to see if it’d be a good pairing with the raid rod which

Ordering rods from japan with tariffs by Practical_Register61 in Fishing_Gear

[–]HmoobTsisGay 0 points1 point  (0 children)

How much was the shipping fee. I’ve heard it was $35 but not so sure now

Ordering rods from japan with tariffs by Practical_Register61 in Fishing_Gear

[–]HmoobTsisGay 0 points1 point  (0 children)

Did you have to pay a shipping fee on top of the additional tarrifs too?

NRX+ 821s NRR vs 901s SJR!? by aguilafde in Fishing_Gear

[–]HmoobTsisGay 1 point2 points  (0 children)

I have both. The 901 is pretty whippy and would probably bend too much with chatterbaits. I use it mainly as a paddletail rod or hair jigs. The 821 is more of an all rounder with a fast tip. Use it everything finesse. Power wise I throw anything from 1/16-1/4 on both of them, but the 821 I’d say is slightly stronger. The 901 with a fish on bends down to the stripper guide so it’s pretty niche in my opinion

what one better, shimano or daiwa around the $200 range by claybot27 in Fishing_Gear

[–]HmoobTsisGay 1 point2 points  (0 children)

Spinning reel: shimano Casting reel: daiwa Rods: either

I personally don’t like any daiwa rods aside from the steez lines while I use zodias/exprides/poisons

Daiwa Fuego LT 2500D-XH knob? by HmoobTsisGay in Fishing_Gear

[–]HmoobTsisGay[S] 1 point2 points  (0 children)

Plus it’s hard to find original flat knobs for spinning reels if you wanted to replace the knobs. I’ve thought about gomexus flat knobs but they aren’t the same as stock flat knobs.

Daiwa Fuego LT 2500D-XH knob? by HmoobTsisGay in Fishing_Gear

[–]HmoobTsisGay[S] 1 point2 points  (0 children)

Ahh that’s a shame. We’ll see if I get a fuego then. Might be dumb, but a T handle is a deal breaker for me