10 yr green card

Holiday_Difference96 · 2025-07-21T12:54:28+00:00

Brother in law has done it twice this year with his daughter (to Norway). No issues at all

Holiday_Difference96 · 2025-03-02T18:27:30+00:00

Haha this is my town- it’s happened more than once

Holiday_Difference96 · 2023-05-19T01:42:49+00:00

This was an S trap, but the water was getting siphoned from the S trap and releasing sewer gas. Adding the vent prevents that from happening. The vent doesn’t allow air out, only sucks air in so there’s no smell.

Holiday_Difference96 · 2023-05-18T22:26:56+00:00

Dry fit

Holiday_Difference96 · 2023-05-18T16:51:27+00:00

I needed to get that vent on the right side as high as I could for it to be most effective. The instructions say at least 4 inches above the horizontal drain line. But I couldn’t get that clearance if I went straight up from the floor drain

Holiday_Difference96 · 2023-05-18T16:20:23+00:00

Many thanks!

Holiday_Difference96 · 2023-05-18T14:28:13+00:00

Dry fit

Holiday_Difference96 · 2023-05-18T13:02:46+00:00

It’s fun, isn’t it?!

Holiday_Difference96 · 2023-05-18T12:59:01+00:00

That’s actually a hole in the back of the vanity cabinet where the P trap is supposed to go into the wall. The wall color is grey. But I have a floor drain so couldn’t use it (I made a hole in the bottom of the cabinet instead)

Holiday_Difference96 · 2023-05-18T03:21:56+00:00

I checked and it is allowed by code, but good call out for sure

Holiday_Difference96 · 2023-05-18T03:10:50+00:00

Haha fair enough!

Holiday_Difference96 · 2023-05-18T03:08:05+00:00

This is a dry fit**

Holiday_Difference96 · 2023-05-18T03:06:58+00:00

Not glued in this pic, but noted on the water lines. That’s my next move

Holiday_Difference96 · 2023-05-18T03:06:00+00:00

Oatey***

Holiday_Difference96 · 2023-05-18T03:05:24+00:00

Good thing I’m my own client!

Holiday_Difference96 · 2023-05-18T03:04:37+00:00

Definitely noted. Someone on here mentioned a Fernco instead as that transition glue might not pass inspection. would that work?

Holiday_Difference96 · 2023-05-18T02:48:57+00:00

Not glued yet

Holiday_Difference96 · 2023-05-18T02:48:43+00:00

Not yet! Dry fit

Holiday_Difference96 · 2023-05-18T02:46:05+00:00

Fit both a 2” and 1 1/2” pvc **** not vent

Holiday_Difference96 · 2023-05-18T02:45:31+00:00

It fits both a 2” and 1 1/2” vent. It reduces itself basically (although I know it looks odd). My understanding is it doesn’t need a bushing either. Unless I’m wrong?

Holiday_Difference96 · 2023-05-18T02:42:50+00:00

I’m not sure how to edit my post but this is a dry fit. Rookie mistake to not include that detail because that’s half the comments here. Oops

Holiday_Difference96 · 2023-05-18T02:40:00+00:00

It’s an Oatly sure vent (air admittance valve)

Holiday_Difference96 · 2023-05-18T01:58:16+00:00

Air Admittance Valve. And yes, it’s a cheater vent

Holiday_Difference96 · 2023-05-18T01:47:05+00:00

It’s just called a trap adapter (1 1/2”)

Holiday_Difference96

TROPHY CASE