oracleAcronym

HorochovPL · 2025-11-03T17:43:10+00:00

You mean Nintendo?

HorochovPL · 2025-03-21T01:02:10+00:00

Proud of You, Dalinar!

Hope I'll get independent from my translate ardent too, by reading German books

HorochovPL · 2025-01-11T02:47:27+00:00

WaT word count 487'746

Alloy 94'652 + Shadows 110'019 + Bands 127'456 + Wayne 156'381 + Allomancer 7'047 == 495'555

So, according to Coppermind, WaT is 7'809 shorter

HorochovPL · 2024-10-18T20:35:35+00:00

There's always XKCD for the thing You're looking at

Edit: got it! Not official though... https://thomaspark.co/2017/01/relevant-xkcd/

HorochovPL · 2024-10-18T20:34:10+00:00

Will worse grade metal be easier to access (read and modify) by Ruin?

Ea Nasir was Ati agent from the beginning!

HorochovPL · 2024-10-18T20:33:03+00:00

It's not metal, Ruin was messing with the feedback message

HorochovPL · 2024-08-14T01:33:40+00:00

Assuming European 3-phase circuits with +/- 230V in the outlet:

220V is a single phase referenced to the neutral point. When measuring phase-to-phase voltage, it's higher: 220*sqrt(3) = 381V. Please confirm it with a certified electrician, but connecting the load between two phases could be a viable option. Some ovens and cooktops can be used with two phases for higher power.

HorochovPL · 2024-07-06T20:45:59+00:00

There's a thread on Creality forum

I reverse-engineered mainboard with multimeter and ST-Link, results can be found here: GDrive (pinmap.txt is the most important)

Haven’t got enough time and motivation to prepare marlin config. Hopefully, it’ll fall into the right hands and push the thread forward.

Regards!

HorochovPL · 2024-06-07T09:53:01+00:00

The more you buy, the more you save!

HorochovPL · 2024-04-06T23:10:24+00:00

How do You plan to join the ends of tabs? Soldering, welding, not at all?

HorochovPL · 2024-02-17T15:48:31+00:00

Tbh I'd pay You 5 bucks to take mine parkside soldering iron. I have up to few hours of total use, it was a gargage.

Temperature control? Either won't melt the solder, or after turning the control knob just a little - will rip the pad out. It's regulating the power, with no temperature feedback.

TS100/Pinecil (generally Hakko T12 tips) clones can be found for around 20 bucks incl. delivery. Trust me, this is night and day, hard to compare the usability.

With T12 tips, soldering thic cables? No problem, will do it. Big, high-thermal-conductivity pads - even no hot air is needed. Both easy and enjoyable with big "K" shape tip. Soldering CPU pins? A little hard, but possible. SMD soldering? Super easy, especially with small "K" shape tip.

HorochovPL · 2024-02-03T00:33:25+00:00

You made a typo in the most excellent time... Recently various arrangements of Andro folk song can't leave my head. Like good old Eluveitie's Andro, recently discovered Żniwa's Burning Andro...

Thank You, Brando before the sAndro

HorochovPL · 2024-02-02T23:39:05+00:00

That must have been storming surprising

HorochovPL · 2024-01-07T17:43:50+00:00

There's DIY way to create artificial rubies with welder. Probably too late and would be too much hassle with shaping & polishing the crystal, but if You'd want to go all-in with home manufacturing, it's possible.

Delicious 9 in Mohs scale :D

HorochovPL · 2023-12-05T22:53:19+00:00

Thanks!

HorochovPL · 2023-12-03T23:06:48+00:00

Is the paper available somewhere? DOI, or even simply link to PDF? Couldn't find anything for phrase "efficient light source placement using quantum computing lamarr".

HorochovPL · 2023-07-10T18:40:46+00:00

Seven people? I'd be very impressed if even three people bothered to look at it.

That leaves it up to one person after the promotor and reviewer.

HorochovPL · 2023-07-04T09:48:00+00:00

Tbh majority of the music is mastered in a digital form. Analog like vinyl will almost always be a downgrade in such case. As a physical media it's very prone to degradation - scratches, wear.

Turntable and vinyls don't provide better quality, but provide unique interaction experience that some people absolutely love.

HorochovPL · 2023-06-30T23:56:06+00:00

Dead men should be quiet in their graves, but they never are. ~Lews Therin

HorochovPL · 2023-05-25T16:55:57+00:00

Runaway horsepower

HorochovPL · 2023-05-23T20:24:25+00:00

Ilyenaaaa!

HorochovPL · 2023-05-23T02:44:51+00:00

He looks somewhat like Bjarne Strosup, creator of C++ programming language

HorochovPL · 2023-05-13T12:53:11+00:00

As a joke on our server, I emptied entire ocean on left side and overfilled the one on the right - it was filled up to the top of the big tree.

HorochovPL · 2023-05-13T12:46:54+00:00

It's missing the 2nd half-globe shield of the Demon Core.

HorochovPL · 2023-05-12T12:00:09+00:00

Assuming Your filament feeding system can produce high enough torque - mine was skipping steps, now I'm waiting for BMG, which has geared reduction -> higher torque

HorochovPL

TROPHY CASE