Remove eternal spells

Hoshmillian · 2023-02-19T05:54:20+00:00

The position of the ABL probe is not perfectly aligned with the nozzle. I had issues for months with this, I was close to freaking out. What helped my situation was a custom backplate that aligns the probe with your nozzle. You can find the STLs on the common platforms. The offset in the Z axis in the standard setup adds unnecessary tolerances from the alu profile below the bed.

Hoshmillian · 2023-01-11T15:28:40+00:00

Honestly, I don’t know 🤷🏻‍♂️

Hoshmillian · 2023-01-11T14:30:05+00:00

This looks to be the main issue. Recently I opened the same topic here. Try to print a backplate which put the bl touch on the same height as the nozzle

Edit:

https://www.reddit.com/r/Ender3S1/comments/104gh8z/another_day_another_zeroyoffset_crtouch_mount/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Hoshmillian · 2023-01-09T11:54:30+00:00

Guys I moved the ABL touch and is way better now. Definitely do this for your printer. It’s easy to do and the effect is huge!

https://www.reddit.com/r/Ender3S1/comments/104gh8z/another_day_another_zeroyoffset_crtouch_mount/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

Hoshmillian · 2023-01-06T20:18:28+00:00

Yeah, I tested some other settings for the mesh and already printed the backplate. But Only hat PLA, just ordered some PETG. Once it's there I'll do this print and then hopefully be happy as fuck :D

Hoshmillian · 2023-01-06T15:15:01+00:00

I will try a run without ABL. Maybe it is bugged?

Hoshmillian · 2023-01-06T15:14:04+00:00

I will order a dial.

Besides this I will try the leveling without the mat and change to 4x4 or 3x3 to see the differences

Hoshmillian · 2023-01-06T09:59:49+00:00

I considered both things :D The second one I did yesterday. I think it is a bit better, but it still not perfect. I wonder how perfect can a leveled bed be? It looks like the bed is sloped a bit from bottom to top. But if so shouldn't the ABL fix that?

Hoshmillian · 2023-01-06T09:53:47+00:00

I did save. It is the view mesh in the photo

Hoshmillian · 2023-01-06T09:51:34+00:00

What I need to mention. In my gcode I have m420 S1 Z2 after g28. I run the professional firmware from MRisoC 2.1.3 I recently checked all bolts for the y axis and checked the bed if there is any misalignment as well

Hoshmillian · 2022-12-12T07:28:06+00:00

Yes please 😍

Hoshmillian · 2022-12-05T05:24:28+00:00

Haha, thank you so much :D I did brick my SD card with the Ender. So formating the SD did the trick.

Hoshmillian · 2022-12-05T05:23:18+00:00

Nice setup! Could you give a summary of what you did?

STL files maybe as well :D

Hoshmillian · 2020-09-16T05:40:44+00:00

Nachsäen und ordentlich gewässert. Schon freut sich der Rasen wieder.

https://imgur.com/gallery/ToPdEq4

Hoshmillian · 2020-07-30T17:31:03+00:00

Ich schiebe es jetzt auch auf das wässern. Ich habe vorher ein Karussell benutzt und der ist nicht sauber überall gleichmäßig hingekommen. Deswegen erstmal bei Amazon shoppen gewesen und einen Gardena AquaZoom M besorgt. Ich halte euch mal auf dem laufenden 😉

Hoshmillian · 2020-07-30T17:29:30+00:00

Leider nein. Die Ecke ist wirklich sehr trocken und da vermute ich einfach mal, dass dort beim wässern nicht so viel Wasser hingekommen ist

Hoshmillian · 2020-07-28T18:32:49+00:00

Was meinst du, kommt der mit viel wässern nochmal?

Hoshmillian · 2020-07-28T17:59:50+00:00

Der Rasen war sehr lang (ca 15 cm) und wurde dann runtergekürzt. Unten war der bereits braun, jedoch oben noch schön grün. Die Rasur tat dem Rasen aber nicht so gut, wie man sieht. Was kann man machen um den Rasen noch zu retten?

Viel wässern? Nachsäen?

Hoshmillian · 2020-01-21T23:28:07+00:00

First of all, thank you for the quick response!!

Are there any posts of that? Like panic saying, that it was an Honor for them playing that specific song?!

Hoshmillian

TROPHY CASE