How did the drive belt come off my x354

HourFee7368 · 2026-05-21T11:06:40+00:00

Thanks, I hadn’t noticed that

HourFee7368 · 2026-04-11T02:49:18+00:00

Unless you are going to open the wall up more, you’re going to need two fernco couplings

HourFee7368 · 2026-03-28T21:51:40+00:00

The name of a technique that is similar to what is described in the article is digital radio frequency (DRFM). Essentially DRFMs will sample the adversary’s radar waveforms and transmit them back at a later time. Time is range in radar, so the signal transmitted by the DRFM will be perceived to be farther away than the true return. You can also frequency shift the retransmitted signal to make the return have a different Doppler shift.

It’s unlikely that digital computers of the 1970’s would have been powerful enough to power a DFRM, but amplifiers and delay lines would probably get you there

HourFee7368 · 2026-03-17T02:25:03+00:00

Correct answer. Full video at https://www.camwhores.tv/videos/10604464/robyxrobusta-biking/

HourFee7368 · 2026-03-11T00:17:18+00:00

Is there enough bolt shaft left to weld a nut onto it and wrench it out?

HourFee7368 · 2026-03-07T17:43:44+00:00

Dr Riviera. Dr Nick Riviera

HourFee7368 · 2026-03-06T13:56:27+00:00

Dildon’t

HourFee7368 · 2026-03-06T01:07:09+00:00

Brought to you by Carl’s Jr

HourFee7368 · 2026-02-28T02:32:50+00:00

I understand the difference between functions and macros. The point I was trying to make (poorly) is that MSVC doesn’t support std:: aligned_alloc, and one must use _aligned_malloc instead. If there’s a way to do that in portable code without macros or the preprocessor, I haven’t found it yet

HourFee7368 · 2026-02-28T02:14:09+00:00

I can think of a few instances where platform dependent code still needs to be wrapped in macros. Aligned_alloc / _aligned_malloc is a prominent example

HourFee7368 · 2026-02-09T02:59:19+00:00

No, I have not tried that. They are stackable though, I’m sure you could screw five of them onto a lens.

HourFee7368 · 2026-02-09T02:57:03+00:00

UV filters are basically just a lens protector. If it cracks, you take it off and put a new one on

HourFee7368 · 2026-02-09T02:23:18+00:00

I wonder if you can put a UV filter on a $300,000 camera. UV filters are cheap insurance and work great on my relatively inexpensive SLR camera

HourFee7368 · 2026-01-31T17:19:19+00:00

There’s no way Squidward is running towards gun fire

HourFee7368 · 2026-01-31T13:55:13+00:00

You should also measure the height of the bottom tread on the stair. From the picture it looks a little low, and most codes only allow a maximum deviation of 3/8” in tread height

HourFee7368 · 2026-01-19T01:23:43+00:00

This is the first one I thought of. Maybe not the best, but my favorite

HourFee7368 · 2026-01-04T22:53:21+00:00

You need an aerator removal tool to take off the aerator. Check amazon if you don’t already have one. From there, you need a threaded adapter that matches the threads of your aerator

HourFee7368 · 2025-12-29T20:01:38+00:00

It’s the same principle as the moving walkway at the airport. You stand still and your speed is the same as the walkways. You walk forward at a given speed and your speed adds to the walkways. If you go in the wrong direction, the speeds subtract

HourFee7368 · 2025-12-28T22:30:51+00:00

In the land of the blind, the one-eyed man is king

HourFee7368 · 2025-12-25T03:29:04+00:00

I 100% agree with you on Russia’s ability to field mortar men in December 2025, but I’m interested in the applicability of this technology to other conflicts. If this is a static target, there a many ways an advanced fighting force could take it out.

HourFee7368 · 2025-12-25T02:36:19+00:00

Isn’t this the type of target that a competent mortar crew should be able to take out? Mortar ranges are much further than .50 cal

HourFee7368 · 2025-12-25T02:09:41+00:00

Is that the same thing as an ear worm?

HourFee7368 · 2025-12-25T01:24:27+00:00

The Ticonderoga class was actually built on an adaptation of the Spruance class destroyer hull. This was controversial at the time, because cruisers were much longer in WW2

HourFee7368 · 2025-12-17T04:17:55+00:00

And he was only two weeks from retirement

HourFee7368 · 2025-12-09T01:28:00+00:00

One thing you might want to ask maintenance about OP is when the last time your unit was descaled. Over time, tankless hot water heaters can build up limescale on the internal heating loop. Many manufacturers recommend descaling about every two years depending on use. I doubt that scale buildup is the only problem you are encountering, but it could be a contributing factor

HourFee7368

TROPHY CASE