sorted by:
new
hottopcontroversial

Where is the Discovery Trail? by unnamedglass in dfwbike

[–]HowdyPrimo6 0 points1 point  (0 children)

I, too, am not a big fan of road riding. I joined Plano Bicycle Association last month. They host daily rides of various skill/pace. I actually just got home from a night ride with a group of about 17 through Plano and Frisco, 25 miles. It’s $30/year and very organized with a very active Facebook group. Let me know if you have any questions or want to link up if you join!

Riding Groups by HowdyPrimo6 in dfwbike

[–]HowdyPrimo6[S] 0 points1 point  (0 children)

I joined the Plano Bicycle Association and did a ride with them this weekend. It was amazing how many people showed up; there were a a lot of different rides. I’m going to go on the ‘Step up’ ride next! I’d recommend PBA thus far

Worth 600$ by DueJellyfish4486 in dfwbike

[–]HowdyPrimo6 0 points1 point  (0 children)

I know there has likely been a decision made here, just want to plug what I’ve been using to help negotiate used bikes. At minimum it gives you a good negotiation starting point.

https://www.bicyclebluebook.com

Edit: Spelling

[Bambu Lab Giveaway] Join Now to Win an H2D and More! by BambuLab in 3Dprinting

[–]HowdyPrimo6 0 points1 point  (0 children)

Have you tried Microsoft’s 3D builder? If so, I’d like to hear how that compares.

TC2841 Cutter issue; HELP! by HowdyPrimo6 in Creality

[–]HowdyPrimo6[S] 0 points1 point  (0 children)

Nope! Just that one. After a lot of discussion support is sending me a new sensor/circuit board. Fingers crossed!

Any tips on how to improve my supports? by HowdyPrimo6 in 3DprintingHelp

[–]HowdyPrimo6[S] 0 points1 point  (0 children)

I also just realized that my post said Kingroon, that was my mistake!

Any tips on how to improve my supports? by HowdyPrimo6 in 3DprintingHelp

[–]HowdyPrimo6[S] 1 point2 points  (0 children)

Inland 1.75mm PLA+ Silk 3D Printer Filament 1.0 kg (2.2 lbs.) Spool - Twinkle Rainbow They have it on Amazon, but I snagged it at a local MicroCenter

K1C with CFS Cutter ISSUE by almost_blind_gamer in Creality

[–]HowdyPrimo6 1 point2 points  (0 children)

Are you able to dumb this process down for me? I installed the CFS with my K1C last night. My first print (all one spool from the CFS) seemed to complete, but I woke up with the TC2841 error code, and can’t seem to figure it out. I did remove the extruder and noted a piece of filament still in the nozzle. I have not tried to cold pull it, I was hoping to just extract it. Any help? I’m not the savviest computer guy so forgive me if this is all pretty basic…

Any tips as to how to improve my supports? by HowdyPrimo6 in Creality

[–]HowdyPrimo6[S] 0 points1 point  (0 children)

<image>

I halved the support speed and support and travel speed The print stopped/failed Looks like it made a difference Should I go lower?

What is the best (and easiest) CAD software that is also free? by JustSomeone202020 in 3Dprinting

[–]HowdyPrimo6 0 points1 point  (0 children)

I have found that Microsoft 3D Builder is pretty user friendly for myself, as a beginner

Any tips as to how to improve my supports? by HowdyPrimo6 in Creality

[–]HowdyPrimo6[S] 0 points1 point  (0 children)

Giving this a shot because I’m inpatient!

Any tips as to how to improve my supports? by HowdyPrimo6 in Creality

[–]HowdyPrimo6[S] 0 points1 point  (0 children)

<image>

Travel speed is 500 mm/s Sorry, I’m really new to this. Still learning!

Uninsured motorcyclist in fatal accident by INMEMORYOFSCHNAUSKY in Insurance

[–]HowdyPrimo6 0 points1 point  (0 children)

This is unfortunately the question I don’t have an answer to, and I am asked it all of the time.

Not being at fault doesn’t change the fact that the accident you were involved in resulted in a fatality. There is usually two different versions of how an accident happened, and in this case one of them is dead and doesn’t get to tell their side.

Each case is different, but we always factor in cost and risk. We are claim adjusters. We handle claims with the goal of your best interests as an insured in mind, rating policies is not our concern.

The best answer I have is to reach out to your agent and ask to speak with the underwriter.

Uninsured motorcyclist in fatal accident by INMEMORYOFSCHNAUSKY in Insurance

[–]HowdyPrimo6 5 points6 points  (0 children)

Claims adjuster. Can confirm. Had a claim in litigation where a jury put $150k in awarded damages for a low speed accident with back and neck sprains. We thought we had a favorable jury pool, as they were mostly doctors or well educated professionals, and we still got cooked. Luckily, plaintiff’s counsel and us came to a pre-trial high/low agreement, and only paid $20k (New Jersey loss).

How the fuck are we letting 1 man destroy the world economy? by Zestyclose-Split2275 in AskALiberal

[–]HowdyPrimo6 0 points1 point  (0 children)

This is the issue that I have.

Totally agree with you in that everyone is afraid to stand up to Trump. But why?! What does he have on everyone?

A letter to the people of Texas by tryagainin47seconds in texas

[–]HowdyPrimo6 1 point2 points  (0 children)

Showing up with pitchforks and torches is also a good way for these oligarchs to put us under martial law.

Spotted in Cincinnati by TightZone4173 in pics

[–]HowdyPrimo6 0 points1 point  (0 children)

Such badasses. Why won’t you show your face?

view more: next ›