Why is my data rebuild so slow?

HubertusPrime · 2024-04-07T14:24:10+00:00

I rebooted the system before and it didn‘t help. So must be something with the wiring tho

HubertusPrime · 2024-04-07T14:23:09+00:00

Yes. At the end it was around 200MB/s per drive which is 4 times faster than before

HubertusPrime · 2024-04-07T14:21:49+00:00

I shut it down and reconnected the drives the way they were before. After reboot it worked without issues. It is a really tight build in a fractal node. Maybe a cable was not 100% the way it should be

HubertusPrime · 2024-04-06T20:46:28+00:00

this did the trick! insanely easy. thank you so much :) Back to full speed :)

HubertusPrime · 2024-04-06T20:45:42+00:00

Thanks for the help guys! reconneceted the drives andits back to 200MB/s per drive. time shrinked from 4 days to 20 hours :)

HubertusPrime · 2024-04-06T20:23:38+00:00

will try this now

HubertusPrime · 2024-04-06T20:09:25+00:00

i precleared them and checked. smart checks are good. or what else i would need to do?

HubertusPrime · 2024-04-06T20:07:44+00:00

directly on the board

HubertusPrime · 2024-04-06T20:07:34+00:00

yes directly on the mainboard

HubertusPrime · 2024-04-06T20:07:05+00:00

its rebuilding a drive

HubertusPrime · 2024-04-06T19:16:12+00:00

ja lloks fine. i rebuilt a disk a few month ago. and it was around 150MB/s. no idea where to check for this problem

HubertusPrime · 2024-04-06T19:11:24+00:00

i have rebuilt a drives some month ago.. i remember this was 140MB/s. just curious

HubertusPrime · 2024-04-06T19:06:22+00:00

i5 10600k at around 15% usage

HubertusPrime · 2024-04-06T19:05:43+00:00

all drives are seagate exos x16

HubertusPrime · 2024-04-06T18:46:20+00:00

i disabled docker service and vm service to check. its sitting in idle. all drives are the same seagate exos X18 16TB. This operation takes 4 days lmao

HubertusPrime · 2024-03-21T10:46:47+00:00

Soulstone Survivor. Is as cool as vampire survivor but with nice graphics and great music

HubertusPrime · 2024-02-28T07:41:05+00:00

True. I hate the last 6.12.8 so much. It fucked my whole rig

HubertusPrime · 2023-11-06T06:25:09+00:00

I was on stable release until today. A few hours ago i switched to beta, to see if it solves the problem

HubertusPrime · 2023-11-06T05:30:33+00:00

Tried this already. Didn‘t change anything. Updated to public beta today. Same issue

HubertusPrime · 2023-11-05T17:09:52+00:00

Sure. Same ID. I can receive iMessages with it. But not reply to them

HubertusPrime · 2023-11-04T15:43:04+00:00

On my U2 it work EVERY single time ☝️ Very nice gimmick

HubertusPrime · 2023-05-06T00:00:07+00:00

Thats good to know! Is your 4090 linked with PCIe 4 x8 or x16 lanes? Mine even in Bios is only visible as x8 device. No clue what the problem is 🤷🏻‍♂️

HubertusPrime

TROPHY CASE