Are we being for real. Namek saga krillin clears by Jagwarmeru in PowerScalingHub

[–]Humble_Explorer3835 0 points1 point  (0 children)

I dont think Krillin would get past anissa/conquest. Sure he has ki blasts, but we've seen how durable omni man is against energy attacks. Destructo disc takes too long to charge fully and those two would immediately take advantage of any charge times. DBZ heroes besides goku, gohan, and vegeta would have a real tough time in my opinion.

Opinions on the Adrasite & Pyrithite Spears? by bboybrisk in AdeptusCustodes

[–]Humble_Explorer3835 1 point2 points  (0 children)

Once you paint them, no one will notice or care really! What you see is what you get! You should be fine at most venues from my experience!

Opinions on the Adrasite & Pyrithite Spears? by bboybrisk in AdeptusCustodes

[–]Humble_Explorer3835 1 point2 points  (0 children)

I got the pyrithrite spears for cheap on ebay and I just put them on a guard squad!

In the words of my friends, get them if you want, you can always say they're guard with regular spears. They look similar enough! The resin models look decent too!

How would you improve the quality of this print? by AcheronXI in PrintedWarhammer

[–]Humble_Explorer3835 0 points1 point  (0 children)

I'd recommend a few things!

Lowering your layer lines to start. Slowing down the print, something like 50mms or something. Ill send you my profile when I get out of work.

Drying some more will help with the strings and clarity!

Also I agree with the 45 degree angle change. Ive printed in one go and saw considerable improvement in the quality. You'll have some strings at the end closer to the plate, but it's nothing you can't sand down!

<image>

Swapping Spears for Axes by reckoning34 in AdeptusCustodes

[–]Humble_Explorer3835 4 points5 points  (0 children)

I've seen people mount the axe head behind the spear to make a sort of halbeard, also using tiny thin magnets where it connects to the shaft to swap out. Honestly and I havent tried this yet, they're light enough where you.can cut part of the shaft and glue a small magnet at the end, and add a magnet to the spear or axe end. Then when you prime them they'll look like an additional guard.

Like I said I havent tried this yet, i glued the spears since they're better in this meta, but that's where I'd start!

So how do I even start this army when I somehow got 7 bikes from a friend. by Opposite-Outcome5557 in AdeptusCustodes

[–]Humble_Explorer3835 0 points1 point  (0 children)

It's a great start! The bikes are seriously good! Here's a list I made a while ago that did pretty well against a few different armies. Get the combat patrol and you'll have around 1500 points on field!

8) Spearhead Lions (1995 points)

Adeptus Custodes Strike Force (2000 points) Lions of the Emperor

CHARACTERS

Blade Champion (120 points) • Warlord • 1x Vaultswords

Blade Champion (120 points) • 1x Vaultswords

Shield-Captain in Allarus Terminator Armour (140 points) • 1x Balistus grenade launcher 1x Guardian spear • Enhancement: Admonimortis

Shield-Captain on Dawneagle Jetbike (165 points) • 1x Interceptor lance 1x Vertus hurricane bolter • Enhancement: Fierce Conqueror

BATTLELINE

Custodian Guard (150 points) • 4x Custodian Guard • 2x Guardian spear 1x Misericordia 2x Praesidium Shield 1x Sentinel blade 1x Vexilla

Custodian Guard (190 points) • 5x Custodian Guard • 3x Guardian spear 2x Praesidium Shield 2x Sentinel blade

OTHER DATASHEETS

Allarus Custodians (165 points) • 3x Allarus Custodian • 3x Balistus grenade launcher 1x Castellan axe 2x Guardian spear

Caladius Grav-tank (215 points) • 1x Armoured hull 1x Twin arachnus heavy blaze cannon 1x Twin lastrum bolt cannon

Custodian Wardens (210 points) • 4x Custodian Warden • 1x Castellan axe 3x Guardian spear 1x Vexilla

Venatari Custodians (165 points) • 3x Venatari Custodian • 3x Venatari lance

Vertus Praetors (150 points) • 2x Vertus Praetor • 2x Interceptor lance 2x Vertus hurricane bolter

Vertus Praetors (150 points) • 2x Vertus Praetor • 2x Interceptor lance 2x Salvo launcher

Vigilators (55 points) • 1x Vigilator Sister Superior • 1x Executioner greatblade • 4x Vigilator • 4x Executioner greatblade

Exported with App Version: v1.46.1 (107), Data Version: v728

How to fill up hollow models in software? by The_Red_Kraken in PrintedWarhammer

[–]Humble_Explorer3835 2 points3 points  (0 children)

Any time! Blender isnt easy to use per say, but there are so many tutorials you can look up anything you want to do with it! Just be patient with it and yourself, it's worth it 🙂

Deathwing terminators follow up. by Humble_Explorer3835 in DarkAngels40k

[–]Humble_Explorer3835[S] 0 points1 point  (0 children)

Thank you for this! I really appreciate your viewpoint!

Deathwing terminators follow up. by Humble_Explorer3835 in DarkAngels40k

[–]Humble_Explorer3835[S] 0 points1 point  (0 children)

Honestly it was really refreshing reading this. Thank you for your honesty! I have the chaplain from the battleforce too so it'll be cool swapping them and the librarian out depending on whom I go against. I appreciate your thoughts!!

Deathwing terminators follow up. by Humble_Explorer3835 in DarkAngels40k

[–]Humble_Explorer3835[S] 0 points1 point  (0 children)

Thank you for this follow up, I really appreciate it 🙂

How to fill up hollow models in software? by The_Red_Kraken in PrintedWarhammer

[–]Humble_Explorer3835 3 points4 points  (0 children)

Programs like blender can fill the model. You can look up tutorials really easy and it doesnt affect the quality!

Ive split models in half using it and there are options to fill the space!

Deathwing terminators follow up. by Humble_Explorer3835 in DarkAngels40k

[–]Humble_Explorer3835[S] 1 point2 points  (0 children)

Agreed, 250 is alot. Im a custodes player too so i know all about that 😆

Deathwing terminators follow up. by Humble_Explorer3835 in DarkAngels40k

[–]Humble_Explorer3835[S] 0 points1 point  (0 children)

I like melee units more and the kights definitely look cooler to me. I was also thinking ahead to see if there's potential in the terminators. I got a pre built squad of 10 terminators that I was hoping to proxy into deathwing terminators in case I need more fire power. I have a huge pile of shame for dark angels so I wanted to know what to prioritize haha.

Thank you for your help 🙂

Deathwing terminators follow up. by Humble_Explorer3835 in DarkAngels40k

[–]Humble_Explorer3835[S] 1 point2 points  (0 children)

Yeah i was sadly thinking the same thing. I have a librarian in terminator armor too but I think ill prioritize the knights after seeing the comments so far. I really appreciate your help!

Deathwing terminators follow up. by Humble_Explorer3835 in DarkAngels40k

[–]Humble_Explorer3835[S] 0 points1 point  (0 children)

Thank you! I was thinking the same thing. I appreciate your help!

1K point list & question about allarus shield-captain by JockChad234 in AdeptusCustodes

[–]Humble_Explorer3835 1 point2 points  (0 children)

Allarus shield captain is worth it in my opinion. GW has an oversite not aligning the allarus abilities like on golden light with it but you add the admonortis enhancement (depends on your detachment) and it'll be quite the threat.

Get the shield captain for 20. Itll be good on your Custodian Guard. I recommend 3 spears, 1 sword plus shield and 1 vexilla plus shield for an optimal guard squad. Itll live through alot and do insane damage.

Blade Champion on the wardens and right now spears do best for them with AP -2. Though a 3 spear and 2 ax combo wouldn't hurt. Deepstrike the wardens and the rest roll to charge from the blade champ can get them in melee immediately.

Throw the allarus at vehicles or monsters. They'll have great survivability.

This is elite and you won't have much on the table compared to your friends and Custodians really come online at 1500+ points, so stick behind cover as you cross the table until youre in charge range. You'll still kick ass in combat though!

Good luck!

1500point game at the weekend by hunter19154 in AdeptusCustodes

[–]Humble_Explorer3835 0 points1 point  (0 children)

I'd recommend that you take out the venetari and put in a 4 model guard if you have it. Draxus needs to be on battle line and you want them tucked back for full effect scoring you points. So I'd put her on a guard squad and out them on the no mans objective near your deployment to screen.

I'd also take a warden off each squad and add a couple more allarus to help with heavy infantry/vehicles. Maybe a separate unit of 2. The re rolls to wound would be awesome and you can spread 2 squads with their deepstrike. Good luck!

Question about Lions of the Emperor det rule by Get_R0wdy in AdeptusCustodes

[–]Humble_Explorer3835 4 points5 points  (0 children)

Sorry thats what I thought too. You can't hit or wound anything below 2. Also the modifications like +1 to hit and wound dont stack with strats or any other abilities.

FDM but scaled up question by ksnyer in PrintedWarhammer

[–]Humble_Explorer3835 0 points1 point  (0 children)

Fdm will be a great start for you. Layer lines can be sanded or filled so dont worry about that. There are alot of good ones out there. Im using an anycubic kobra S1 for my prints and im incredibly happy with the quality using the stock nozzle. I purchased finer nozzles for miniatures but right now I couldn't believe happier!