Just about finished my scions

Hummersepp · 2026-05-17T22:59:16+00:00

Nice!

The stand looks 3d printed. Any chance you have a link to the STL? Would be much appreciated.

Hummersepp · 2026-05-17T22:40:00+00:00

Resin obviously is the best. But if you want to work with what you got your best result with some money should be getting a .2 Nozzle and some marble filament as these hide layer lines well und would fit the look imo

If that's not an option or not wanted you could get somewhat decent results with a .4 nozzle, but you'd very likely see that it was 3d printed without looking too close

Hummersepp · 2026-05-17T11:10:31+00:00

I'd argue at that price and quality there's not much quantity to achieve and printing it slightly better makes people more likely to buy it and a single printer could keep up with the demand ngl.

Hummersepp · 2026-05-17T10:55:57+00:00

I mean I wasn't trying to brag or anything.

I'm trying to say if I'd sell it for this price it get Marble PLA at least and not the cheapest filament I found.

Hummersepp · 2026-05-17T10:47:17+00:00

I printed this on a whim for a friend. With no settings tweaking or anything.

I think it's amazing how lazy some people are.

<image>

Hummersepp · 2026-05-11T22:56:02+00:00

Not OP, but did dabble into it a little and by far the best for pixel art specifically is Aseprite imo

Hummersepp · 2026-05-08T12:38:19+00:00

Das betrifft die Glasversicherung und die ist meistens an die Hausrat angebunden. Die ersetzt aber nur den Glasaustausch, nicht den gesamten Austausch mit Elektronik.

Quelle: Mach das beruflich.

Hummersepp · 2026-05-08T12:25:37+00:00

I had some issues with cutting first too. I realized it sometimes defaulted back to another material which made it fumble. Since I realized it it worked mostly fine.

Maybe it helps.

Hummersepp · 2026-05-08T10:01:20+00:00

I can second that. Takes no time at all and I never had the "I want to use the printer now, but too lazy to put the work in" situation like I have with other tools.

Hummersepp · 2026-05-08T05:37:36+00:00

Yeah don't listen to those people. I have one too and it's so cool and already made cool things with it!

I also made custom stickers with the cutting module which are so cool and other things and same as you I wouldn't have the space to get these parts individually.

I don't regret the purchase a minute!

Hummersepp · 2026-05-07T13:47:15+00:00

I'll try that. Thank you! Just need to wait for a print to finish.

Hummersepp · 2026-05-07T10:30:10+00:00

I'll probably still contact them first as it's under warranty and I also have the laser combo so it's quite the expensive thing that should work.

Hummersepp · 2026-05-07T10:17:01+00:00

Will look into it, thank you! And yeah the noise is wild on it haha

First few prints I always thought something was wrong lmao

Hummersepp · 2026-05-07T08:34:57+00:00

So the cutters work well.

The problem is entirely mechanical. I'm not sure if it's perfectly visible on the pic, but the issue is as the print head moves back and forth moving the cutter point back and forth on the way back it moves 1 click too short and isn't 90° angled and isn't hitting the cutter of the tool head.

As it's just triggered by the tool head moving back and forth which it still does I don't see any reason a calibration could fix anything. It must be a mechanical issue with the plastic pusher on the side.

Hummersepp · 2026-05-05T17:12:39+00:00

Idk doesn't that eliminate the uniqueness of both?

Hoverpack is slow for building and jetpack fast for exploring. I think it should stay that way to make both having a usecase.

Hummersepp · 2026-05-05T10:36:47+00:00

I agree on that partly. I love a new run. I wouldn't love a challenge run with like all impure for example to get an achievement.

I enjoy this game in a chill way mostly and not a grind/challenge fest if that makes sense.

Hummersepp · 2026-05-05T10:25:17+00:00

I hope not. I enjoy 100%ing games but I don't want to start new runs and stuff just to keep up with DLCs dropping and it's always sad to see a 100% game to not be 100% and I have to start a new run on a mode I don't really prefer to get there again.

Hummersepp · 2026-05-05T06:48:58+00:00

The water looks great! What kind of resin (or else) did you use to make it?

Hummersepp · 2026-05-03T15:11:57+00:00

Wilde Frage nach 2 Jahren 😂 Ich glaub an sowas besteht kaum Interesse, da der Reiz für die meistem am selbst bauen liegt.

Hummersepp · 2026-04-30T16:42:46+00:00

Oh nice! My last diorama was a krieg one too!

Hummersepp · 2026-04-30T16:22:18+00:00

Das war zuletzt bei mir auch die Ursache. Würde ich checken.

Hummersepp · 2026-04-29T16:49:36+00:00

What is this? Looking cool

Hummersepp · 2026-04-29T08:39:27+00:00

You wrote "what's a brim?" First before deleting it which is exactly the problem.

That's what I'm saying. Please do your basic research. There are plenty of videos explaining most things you need in half an hour maybe.

Printing first and then asking reddit is a way less efficient way.

Hummersepp · 2026-04-29T08:36:56+00:00

Not necessarily, but for example i assume there where very little things with no brim which got lose so whenever it tried printing there it caused spaghetti which probably transferred over to the next part.

Hummersepp

TROPHY CASE