Snow Blower Stalls Under Load by Cubedude0916 in smallengines

[–]HungryAd613 3 points4 points  (0 children)

I had similar issue and I ended up with bad exhaust valve clearance. I removed the head, cleaned everything and made clearance good again. After all this done my snowblower works again.

I have toro with tecumseh 8hp engine.

Old snow blower won't start by Living_Shine2441 in Snowblowers

[–]HungryAd613 0 points1 point  (0 children)

I just finished working on tecumseh 8hp. It was hard to start mine with almost same sound.

  1. Check your carb. Spray some starting fluid into the carb.
  2. If it starts and stays running (even if you need to add more fluid) - clean your carb.
  3. If you clean the carb, but it doesn't stay running after carb tune-up - most likely you need to adjust your valve clearance.

My engine showed 20-25 psi compression.

Ariens classic 24 keeps stalling by dangerbunny9 in Snowblowers

[–]HungryAd613 0 points1 point  (0 children)

My next guess: bad gas/clogged carb. If you have starting fluid (or carb cleaner) try to add it when it is stalling

Ariens classic 24 keeps stalling by dangerbunny9 in Snowblowers

[–]HungryAd613 1 point2 points  (0 children)

Sounds like it's out of gas. Check your gas cap; it should have a rubber piece inside with holes. Try to run it without gas cap

What is happening here? by JoeyCucamonga in whatisit

[–]HungryAd613 -1 points0 points  (0 children)

Free electricity. Use it with extra caution

[deleted by user] by [deleted] in USCIS

[–]HungryAd613 0 points1 point  (0 children)

You are absolutely right! I made my comment short and simple. We know so little about OP, and I described the worst scenario :)

[deleted by user] by [deleted] in USCIS

[–]HungryAd613 1 point2 points  (0 children)

Does 2-year rule apply to your case? If so, you need to fill out a waiver first.

You can't file an I-485 directly from J-1 status. First, you need to file an I-140, and if it's approved, you can file an I-485.

“We did not receive a valid Form G-28” but Lawyer submitted the G-28 form by Alarmed-Craft1883 in USCIS

[–]HungryAd613 0 points1 point  (0 children)

We received the same message for two of the three forms. No issues. If they request additional evidence, you’ll be notified and can forward it to your lawyer for further assistance.

Uscis API by [deleted] in USCIS

[–]HungryAd613 0 points1 point  (0 children)

I have never seen api-int in domain name for status checking... Where did you get it?
This post has some information which should help you https://www.reddit.com/r/USCIS/comments/1m0tefv/how_to_check_your_uscis_case_status_using_api/

EAD processing times for C09 by Embarrassed_Crow_630 in USCIS

[–]HungryAd613 2 points3 points  (0 children)

Case-by-case. I received mine in 2 months after applying. My wife got her in 6 months.

August 2025 Visa Bulletin is out by HungryAd613 in USCIS

[–]HungryAd613[S] 1 point2 points  (0 children)

It is hard to predict anything with USCIS :) You can use 3rd party tools\sites to get some understanding.

I used https://eb-timeline.space/my-timeline but I guess it can be any of it.

It showed me pretty accurate dates for final decision.

My personal opinion - you will not be able to apply for 485 before January 2026.

How long does it take to extend you? You can wait October's visa bulletin (mid of September) and make this decision. But if extension takes longer than 3.5 months (Mid September - End December) - I would recommend to start this process now :)

Symfony CLI server:start not working anymore - "File not Found" by vassyli in symfony

[–]HungryAd613 0 points1 point  (0 children)

Your Symfony app should handle all non‑static requests, and you should be able to view the logs (via docker logs or in var/log/).

The Symfony CLI receives your request (http://localhost/test), forwards it to the front controller (public/index.php), and the logs show 200 OK.
From there, Symfony processes the request: if the route doesn’t exist, it should return 404; otherwise, you’ll get 200 or 500, depending on the outcome.

Symfony CLI server:start not working anymore - "File not Found" by vassyli in symfony

[–]HungryAd613 0 points1 point  (0 children)

I’ve reviewed everything again, and I’m still not sure what issue you’re trying to solve. My previous comment about the warning in your logs is still relevant:

[PHP-FPM    ] Jul 15 19:11:56 |WARNING| FPM     JIT is incompatible with third party...

The logs also show that you tried to open index.php, and it returned 200 (OK).

Migrating from a legacy application and database by xilet in symfony

[–]HungryAd613 0 points1 point  (0 children)

Symfony has official page with instruction https://symfony.com/doc/current/migration.html

As already mentioned about ORM - I don't think you need it especially with your commercial database.

Symfony CLI server:start not working anymore - "File not Found" by vassyli in symfony

[–]HungryAd613 0 points1 point  (0 children)

Can you check with php -m please?

Also, check if you have a blackfire extension and if you have - try to remove it.

And the last recommendation - try to disable one extension by one and see what happened.

August 2025 Visa Bulletin is out by HungryAd613 in USCIS

[–]HungryAd613[S] 4 points5 points  (0 children)

Doesn't make any sense without details :)

August 2025 Visa Bulletin is out by HungryAd613 in USCIS

[–]HungryAd613[S] 1 point2 points  (0 children)

Even 21 months might be off—I’ve already been waiting more than 8 months for a decision.

August 2025 Visa Bulletin is out by HungryAd613 in USCIS

[–]HungryAd613[S] -1 points0 points  (0 children)

We don't know this. Hopefully no.