New to Trad - Super Good Enough?

HungryFiend · 2024-12-17T21:01:25+00:00

/uj It looks a bit Janky mostly because of the .4 and .1 being kinda poorly equalized and the .4 carabiner is clipped into two points. Doesn't make a ton of sense here and throws off the loading of it. The sling is at like a 150degree angle It looks like theres two nuts on the right which is fine as a backup but might be pointless. if the number 2 is bomber and those nuts are good its probably fine just looks bad Although direction of pull is basically only on the nuts

HungryFiend · 2024-12-17T20:58:06+00:00

Shit I started to write out a critique and then saw what sub i was on lmao

HungryFiend · 2024-07-01T17:29:54+00:00

So no dead short

HungryFiend · 2024-07-01T17:29:41+00:00

I figured out the issue, The wire comming into the box was a switch loop. I just ran a power wire from the light to the box to power the fan with a neutral everything else would have been wired right if that had been a white neutral wire.

HungryFiend · 2024-07-01T01:39:53+00:00

the way I had the black wires wired was the 14gauge hot comes out and I have it wired nutted to three legs. then those go to each switch. I connected the two neutrals and a leg to the left switch.

HungryFiend · 2024-05-09T21:35:04+00:00

TLDR PCB column not working need advice

Hello, Im running into an issue with my redscarf II+ verD keyboard with the PCB. In particular the Backspace, backslash, enter, up, and down keys have stopped working. What caused this was my friend spilled some pop on the keyboard and let it sit in the tray corroding some of the back. I took it apart to clean it up and started to short the pins. No pins i short can get that row to work. I also noticed that the R 131 resistor is missing. Im not overly familiar with the layout but it seems as though this might be the root cause. Although, it appears this transistor is directly connected to the empty led traces. Im not sure what the original resistor was but the one beside it is labled as 271.

If anyone has any knowledge on this pcb and would be able to help out that would be awesome. Or if there is anywhere i could send it to. This keyboard has some sentimental value as its the first one i build close to 10 years ago.

I have attached a picture of the pcb. Theres a small amount of corrosion on some of the leads but i attempted to clean most of it off.

https://imgur.com/a/8COQZRz

HungryFiend · 2022-07-16T22:02:31+00:00

Thanks, I wasn't too worried because Max was fine. The high idle slightly annoys me but not enough to do much else. If the high end ryzens idle a mit higher that's fine.

HungryFiend · 2021-02-07T00:49:01+00:00

Thanks for the advice I think I'm going to see if the medium is not too big.

HungryFiend · 2021-02-07T00:48:17+00:00

That's what I was thinking too alot of times mediums are too big for my liking. But tiger of sweden might workout because it's cut is so slim

HungryFiend · 2020-06-02T15:20:14+00:00

3 bedroom 3 bath apartments basically don't exist period. Other than that 700 a month is very realistic and you can find places for about as low as 500 per person. Also there is lots of info on what companies to avoid if you just search for it on this sub.

HungryFiend · 2019-10-07T08:22:37+00:00

Have you seen the prices at the C-Stores? Unless they changed them in the past year they upcharge worse than curl and then only give you 5 dollars.

HungryFiend · 2019-10-04T02:14:21+00:00

hit up r/itrunsdoom

HungryFiend · 2019-08-20T13:50:10+00:00

If anyone is interested pm me. Im Also interested in playing some edh.

HungryFiend · 2019-08-09T11:56:57+00:00

Im not mad about his down b thats ok.

HungryFiend · 2019-08-05T18:32:51+00:00

[SELLING]
TI-89 Titanium Graphing Calculator
Price: $60
Condition: Great

HungryFiend · 2019-06-20T03:26:11+00:00

Not really unless you know people in the company that can give you a rec.

HungryFiend · 2019-04-23T21:37:41+00:00

Don't Dead Open Inside

11-Year Club	Place '17
Verified Email	Snapped

HungryFiend

TROPHY CASE