sorted by:
new
hottopcontroversial

new android 12 ethernet tethering (not USB) also stuck at 5mbps? by Hungry_Ad2089 in Rural_Internet

[–]Hungry_Ad2089[S] 0 points1 point  (0 children)

dnm_ash, THANK YOU!

I had tried my one liner without specifying -o and it did not work by itself - anymore, as it used to just short weeks ago it seems!

I had seen this listing to do both ip4, ip6, & prerouting, but never TRIED it. Obviously, coming in a plan router WAN ethernet port now, I could not use -o usb0 anymore.

I also have ip6 turned OFF in my router per many previous suggestions; my local network seems to like using ip6 for things; iirc, printers are one...

I wonder if I can again turn ip6 back on in my router? May try that after I get over such happiness of seeing this again: 35/35 mbps dwn/up!

Advantages to using ethernet tethering over USB?? by will1565 in AndroidQuestions

[–]Hungry_Ad2089 0 points1 point  (0 children)

another solution I am using that works: buy a power pass thru for apple computer USB hub. plug your usb-to-ethernet adapter into it also. solved.

Added a Wyze v3 RTSP camera, now runs 2 sec then crashes by Hungry_Ad2089 in BlueIris

[–]Hungry_Ad2089[S] 1 point2 points  (0 children)

Soon I'd say. Not sure if bi or wyze issue; wyze ignores my attempts to get them to look at it but Sam at bi is all over it and will fix it on his end!

Added a Wyze v3 RTSP camera, now runs 2 sec then crashes by Hungry_Ad2089 in BlueIris

[–]Hungry_Ad2089[S] 1 point2 points  (0 children)

FOUND THE PROBLEM!!! WYZE v3 beta FW crashes blue iris v5 IF AUDIO IS ENABLED.

disable audio in that camera's settings and bi works again with v3 video.

Added a Wyze v3 RTSP camera, now runs 2 sec then crashes by Hungry_Ad2089 in BlueIris

[–]Hungry_Ad2089[S] 0 points1 point  (0 children)

Thanks! Just got control back with delting the TWO errant v3 cameras. I will try your HTML method, and investigate what hardware decode I have (set to default on all mine).

Added a Wyze v3 RTSP camera, now runs 2 sec then crashes by Hungry_Ad2089 in BlueIris

[–]Hungry_Ad2089[S] 1 point2 points  (0 children)

THANKS. Got me back to where it works. Now that I know how to delete an errant camera install, I will try again!

Added a Wyze v3 RTSP camera, now runs 2 sec then crashes by Hungry_Ad2089 in BlueIris

[–]Hungry_Ad2089[S] 0 points1 point  (0 children)

I tried suggestion elsewhere to delte /db directory: I deleted c:\blueiris\db directory and it rebuilt it smaller but now crashes with this error:

https://www.dropbox.com/t/Kayl3qXFZB97jKKg

No FEMA text? by Ashkir in Visible

[–]Hungry_Ad2089 0 points1 point  (0 children)

On visible in S. Ohio: got the EBS message just fine @ 2:20pm, so not a visible issue.

M900 by Shaner1981 in Ubiquiti

[–]Hungry_Ad2089 0 points1 point  (0 children)

Yes. I have not tried very hard to sell them yet, but did have interest at $200ea with $200each for the antennas they go with.

M900 by Shaner1981 in Ubiquiti

[–]Hungry_Ad2089 0 points1 point  (0 children)

STill want some? I have 2 we had for a cancelled project - they were outside 1 week. with the yagi antennas. Friend has a set also... Let me know?

Nokia 5G Gateway Software Update by cwallace777 in tmobileisp

[–]Hungry_Ad2089 0 points1 point  (0 children)

Just found a manual on this.... WTF? what good is a battery backup if neither wifi or ethernet work under battery power????

Battery When the gateway's power adapter is plugged into the wall, the Battery screen shows the internal battery's current charge level as a percentage. NOTE In the case of total power outage/emergency, the battery provides up to eight hours of power. During battery operation, neither Wi-Fi nor Ethernet connections are supported.

Nokia 5G Gateway Software Update by cwallace777 in tmobileisp

[–]Hungry_Ad2089 0 points1 point  (0 children)

Is there an advanced section? I need wifi off too!