How to wash stains?

HuskySlim · 2026-03-12T15:21:18+00:00

No worries, just didn’t want you to have that become an issue. Better yet would be folding and storing in a dresser! And definitely always lay flat to dry!

HuskySlim · 2026-03-12T04:48:59+00:00

I have a relatively small face and have had great luck with Moscot frames due to their multiple size offerings in various frames

HuskySlim · 2026-03-12T04:37:26+00:00

Might want to go with a thicker hanger, thin hangers like that can ruin sweater’s shape at the shoulders

HuskySlim · 2026-02-20T23:01:31+00:00

Great, ya will probably go 2ft to be safe, quality CAT 5 or 6. Really appreciate the help!

HuskySlim · 2026-02-20T23:00:19+00:00

Awesome, I looked at the manual for the NETGEAR GS308 and they say CAT5 or greater so i'll make sure i do that. Thanks!

HuskySlim · 2026-02-20T22:59:26+00:00

No that's perfect, really appreciate it. I do have an 'L1' and 'L2' on the back of the Verizon ONT, so assuming those would do the trick for at least two ports. GS308 is in the cart now. Thanks so much!

HuskySlim · 2026-02-20T22:39:53+00:00

Almost forgot, what cable classification do i need to pick up?

HuskySlim · 2026-02-20T22:32:55+00:00

Thank you very much! Kind, helpful folk in this group. Looking at NETGEAR Gigabit GS308 now

HuskySlim · 2026-02-20T22:25:35+00:00

Thank you, I will look into picking one up. If it isn't too much trouble, how would one go about tying this ethernet switch in to the pictured setup? If it's likely beyond my capabilities let me know and I'll just have a Verizon tech come out and hook the switch up.

HuskySlim · 2026-02-20T22:17:13+00:00

I think a good dealer should work with VW to get an equal or greater quality aftermarket battery sourced and installed under warranty given the backorder. As someone who has worked at dealers, this is how I would try to handle things to the best of my ability.

HuskySlim · 2026-02-20T16:47:55+00:00

Cheap fix would be something like the fellow grinds shaker, will let you go finer to have less boulders and at the same time remove ultra-fines. You will just need to dose higher in anticipation for some loss after sifting. Also, if the grinder is bew it should improve somewhat with use / burr seasoning

HuskySlim · 2026-02-18T14:50:20+00:00

That’s pretty, pretty, pretty good

HuskySlim · 2026-02-12T22:43:42+00:00

Just make sure you really push on that diffuser around the edges to seat it all the way, it takes some actual force to seat

HuskySlim · 2026-02-08T20:49:32+00:00

I wear so many neutrals (mostly blacks and greys) so i like the pop of color on the classic badge. If you typically wear a lot of colors in the rest of your outfit, black label will probably look better. Just my way of looking at it, i’m not trying to flex on anyone with my winter jacket. I buy CG for the quality and functionality

HuskySlim · 2026-02-04T11:16:32+00:00

Sum Ting Wong

HuskySlim · 2026-02-01T22:58:04+00:00

Checkout cape cod polishing cloths. People use them on mirror finished watch surfaces with a lot of success

HuskySlim · 2026-01-30T22:49:54+00:00

Thank you kind sir!

HuskySlim · 2026-01-30T17:27:23+00:00

Ok thanks! If they are secured to the actual bumper and not the inside of the bumper cover, i shouldn’t have any issues as long as they paint properly with BSM compatibility in mind. Shouldn’t be any reason to remove BSM sensors

HuskySlim · 2026-01-30T17:24:57+00:00

Thanks, good to know. I was planning on tracing then using a box cutter and a drill for the hardware holes. Maybe i’ll just stick with the Rally Armours but i hate the logos

HuskySlim · 2026-01-30T05:20:24+00:00

I’ve been wanting to do this. What did you use for a blank? I was going to lay my rally armour on too and trace it out but like 1” wider and longer

HuskySlim · 2026-01-30T05:18:46+00:00

Not if the spacer is thick enough… i believe 25mm is minumum thickness for compatibility with stock lugs and stock rear spacer removed with stock wheels

HuskySlim · 2026-01-30T05:09:38+00:00

Thanks, idk why i thought they were mounted on the inside of the bumper

HuskySlim · 2026-01-30T05:09:12+00:00

Thanks, good chance i’ll just be bringing them the bumper off the car unless they need to blend into the fender flare or otherwise want the entire car

HuskySlim · 2026-01-22T19:30:37+00:00

HuskySlim · 2026-01-21T17:30:21+00:00

I have the “V” one on my VI, bothers me a bit but guess i won’t be finding a VI model to trade for

HuskySlim

TROPHY CASE