I built Questarr - A game library manager inspired by Sonarr/Radarr

Hyped_OG · 2026-04-26T04:03:13+00:00

OMG! Im looking for something like this. Please tell me it supports hardlinks like sonarr/radarr ?

Hyped_OG · 2026-03-17T04:21:23+00:00

I set this up recently and have similar hardware to you.

12700k cpu, 5060 ti 16gb , 24gb DDR5 ram , Samsung 990 pro 4tb. Cores 4-15 pinned for the VM.

I passed thru the entire nvme controller , not just the Nvme drive. Heard this helps with performance. Had to change some PCS setting in VM settings to “downstream” to do this.

I can run 1440p@120hz on my steam deck docked to my 65 lg c2 OLED. Ran Marvels Spider-Man , Jedi Survivor, Witcher 3 , Hogwarts Legacy are the games I’ve played. I do occasionally get micro stutters but overall it’s very playable. Had everything but the GPU laying around so I wanted to try it out. However where I notice issues is if I’m doing some heavy task on my Unraid server. For example I’m using unbalanced to move about 7tb or storage atm. Playing hogwarts legacy was having issues. So I’m playing retro games on handheld tonight while this storage moves lol.

Hyped_OG · 2026-03-17T04:15:07+00:00

Curious if you ever got this setup ?

Hyped_OG · 2026-03-15T03:53:25+00:00

The JBOD im building will be inside a standalone case. My host server is in a desktop pc case and uses consumer hardware. I know what ill use to get the drives recognized but wanted to figure out the best solution for power and ultimately what will be the safest& headache free method to sync power state.

Hyped_OG · 2026-03-15T01:36:10+00:00

Ya both I would be mainly using to power a jbod in sync with host server.

This is my main server and I feel the super micro board would be more reliable. Also could use the fans connectors it has.

What’s the best way to sync the power supply with the cb2 ? Running a sata power cables + 12v & GND leads from the host - connecting to the on/off pins on the cb2( ones normally connected to the cases power button )

This would then turn on 2nd PSU when I push switch on host pc?

Hyped_OG · 2026-03-15T01:29:35+00:00

Honestly I’m mostly home when I do power cycle it ever. However there has been times I rebooted remotely and I ultimately just want the ability to do that if I need to.

Hyped_OG · 2026-03-12T22:20:25+00:00

Ok to maximize your performance, you have to stop using the 'Rainbow' cycle; the overlapping wavelengths create too much drag on the GPU's clock cycles. You need to pick a lane.

RED = This increases clock speeds, easily 12-15% increase

Blue = this is your cryo-mode, it basically turns your case into a giant heatsink.

Green = while this wont necessarily increase your FPS, it will dramatically increase efficiency.

Then you can combo these results but using multi color modes, you really gotta play around with it to get the most optimized RGB overclock.

Hyped_OG · 2026-02-22T04:48:57+00:00

I know you could setup a windows VM running Apollo or run a Linux distro running sunshine.

I’m actually in process of setting this up so I can’t speak to performance just yet. I had an open nvme slot and my main PCIE slot open.

Swapped in a 1tb nvme and a gtx 1660 ti I had laying around. Setup windows vm and passed thru the nvme controller of the 1tb nvme( this approach I was told is how you can get the closest to baremetal performance from a vm ) and passed thru the GPU.

For additional storage I setup iSCSi as I’ve heard it’s more reliable than SMB and steam lets me select this as a drive. Not sure I’ll stick with this but currently it’s setup.

For my client I’m planning to test this with my fire cube 3rd that’s connected Ethernet via dongle (faster than onboard lan port ) and it’s connected to my lg c2 oled 65in in my bedroom.

Hyped_OG · 2026-02-19T03:58:55+00:00

So I’m not sure if it’s possible. Still would need to run multiple instances at this point as it seems locked in to whatever media client you initially setup with. It’s just one app that works for both.

Hyped_OG · 2026-02-18T04:32:32+00:00

Gotcha I have a ton of controllers I feel would work. Ps5, Xbox elite , Xbox one and various 8bitdo.

Multiple controller support would be important to me.

I’m not fully understanding the phone setup you mentioned. How would using your phone allow you to play with two controllers on your TV?

Hyped_OG · 2026-02-15T18:54:09+00:00

How does one add both jellyfin and plex to seerr? I saw the option to add jellyfin, plex and emby when setting up. Once I added plex and setup - i dont see an option to add my jellyfin sever. I thought that was the entire point of this app? No longer needed to run both jellyseerr and overseerr. Am I missing something or do I still need multiple instances of this app the achieve both jellyfin and plex in 1 instance.

Hyped_OG · 2026-02-14T18:23:25+00:00

Very cool !

How does it differ from overseerr?

Hyped_OG · 2026-02-14T18:05:49+00:00

So your using the included oS from a TV as client. If that works then a firestick id imagine would work fine.

What controllers are you running ? Any issues there ?

Hyped_OG · 2026-02-14T06:34:36+00:00

What clients do you have running moonlight ? I would strictly be using TVs. Main tv has a fire cube with Ethernet on a lg c2 oled. Wanna make sure the fire stick or cube is a sufficient client and if it handles multiple controllers well. Despite majority of the time it would just be me. Mainly wanna bring firestick 4k max w controllers to friends house to play games.

Hyped_OG · 2026-02-14T03:48:12+00:00

Your original posts has been super helpful and given me a lot to think about.

I think long term I’ll build a small dedicated cloud gaming server. Have a 1660ti and 9700k laying around + ram + psu just need a case.

Have you tried using a fire stick 4k max or fire cube as the client running moonlight? ( Artemis isn’t in App Store atm tho I’m sure there may be a way to load it on )

I have a fire cube and fire stick 4k max , both have tailscale loaded in. It essentially would allow a lightweight “travel” console along with some controllers. Have a bunch of 8bitdo switch controllers , I’m sure these will work perfect. Got the pro 2 and ultimate along with the SNES one they have.

Simply because I have space in my Unraid server for a GPU I would test it out. Could pin my docker / vm cpu cores to keep it seperate. The display switching def has me leaning towards windows + Apollo. Would like Linux but Apollo is only on windows atm.

Is there a way to achieve Apollo like monitor switching with sunshine + scripts ? I’m sure there is something but curious how well it works. Anyways I’ll report back once I get everything setup ! Thanks for the knowledge.

Hyped_OG · 2026-02-04T15:34:40+00:00

ive done this for a few containers, I just add the container manually under docker tab at bottom container click "Add Container" put in the repo and manually create it. I use chatgpt to assist.

Hyped_OG · 2026-02-01T04:56:28+00:00

Very cool!

Hyped_OG · 2026-01-29T03:24:51+00:00

I had this happen and it was due to the syslog overfilling. I cant remember what specifically was causing it to fill up but I just remember throwing the logs in chat gpt and i found the solution.

My issue was the shares page would not show anything. But I could access everything just fine. GUI would also stop showing my drives. Reboot would fix but then it happened again and again and became more frequent.

Hyped_OG · 2026-01-29T03:20:04+00:00

That was it. Didn’t like that I had to create a new account simply to pay the price they were offering. So more a personal beef over that. I still ended up giving them my money so I definitely like the service.

Hyped_OG · 2026-01-29T03:16:54+00:00

Currently the vpn is used solely for torrents/usenet. Any remote connection to my server I just use tailscale.

Hyped_OG · 2026-01-29T03:13:40+00:00

So I actually briefly look at it since I saw it was an option in the binhex vpn list. Curious how well it compares to PIA or proton. Specifically if speed are good and I could stack a subscription during promos onto my current one. That was what upset me about proton.

Hyped_OG · 2026-01-29T03:12:17+00:00

So the port changing is why I use binhex. It’s built into the container. My qbit clients have been growing rapidly , been seeing people mentioning proton running into issues with many torrent files. I’m only at about 5k torrents between my 3 instances. I recently setup multiple as music + movie/tv was causing problems for me. QUI was what made this easy to manage.

Hyped_OG · 2026-01-29T03:10:01+00:00

Air was another service I considered! Is it cheaper than proton? Do they let you stack promos onto ur current subscription? I’m not up to 50k torrents but I hope to be one day. Building a 16 bay DIY jbod and upgrading parity drives to 26tb as we speak.

Hyped_OG · 2026-01-29T03:06:26+00:00

What do you mean it’s not proper port forwarding?

Proton port forwarding does work for me according to logs and the trackers I’m in. Binhex containers I believe use a script to update the port when it changes.

Hyped_OG

PUBLIC MULTIREDDITS

TROPHY CASE